పరిచయం
This manual provides detailed instructions for the assembly, operation, and maintenance of your Pyle PSTND35.5 Speaker Stands. Please read this manual thoroughly before use to ensure proper setup and safe operation. The Pyle PSTND35.5 is a pair of heavy-duty, height-adjustable speaker stands designed for optimal audio placement in various environments.
Image: Pyle PSTND35.5 Speaker Stands with speakers. This image displays the complete assembly of two speaker stands, each supporting a speaker, highlighting their stable design and black finish.
ప్యాకేజీ విషయాలు
Verify that all components are present in the package before beginning assembly:
- 2x Speaker Stands (main pole, platform, base)
- 4x Non-slip Pads
- 8x Floor Spikes
- Assembly Hardware (screws, washers, safety pins)
Image: Package Contents and Dimensions. This diagram illustrates the individual parts of the speaker stand, including the main stand structure, 9-inch square platform, non-slip pads, and floor spikes, along with key dimensions like the 26-52 inch height range.
సెటప్ మరియు అసెంబ్లీ
Follow these steps to assemble your Pyle PSTND35.5 Speaker Stands:
- ఆధారాన్ని అటాచ్ చేయండి: Secure the three-point triangle base to the bottom of the main pole using the provided hardware. Ensure all screws are tightened securely for stability.
- Install Floor Spikes or Rubber Feet: Depending on your flooring, attach the floor spikes (for carpeted surfaces) or rubber feet (for wooden or tiled floors) to the base. Floor spikes aid in equal weight distribution and stability on soft surfaces.
- Attach the Speaker Platform: Mount the 9-inch square platform to the top of the main pole using the designated screws.
- నాన్-స్లిప్ ప్యాడ్లను అప్లై చేయండి: Place the non-slip pads onto the speaker platform. These pads prevent speaker movement and reduce vibrations.
- ఎత్తును సర్దుబాటు చేయండి: Loosen the adjustment knob on the telescoping center column. Extend the pole to your desired height, ranging from 26 to 52 inches. Insert the safety support pin into the nearest hole to secure the height, then tighten the adjustment knob firmly.
- Place Speakers: Carefully place your speakers onto the non-slip pads on the platform. Ensure the speaker's weight is centered on the platform. The stands are designed to support up to 90 lbs per stand.
- కేబుల్ నిర్వహణ: Utilize the integrated cable clip on the stand to route speaker cables neatly, preventing tangles and maintaining a clean setup.
Image: Adjustable Height Mechanism. This image highlights the telescoping center column, illustrating how to adjust the stand's height between 26 and 52 inches using the secure adjustment knob.
Image: Non-slip Pad Application. This image shows the 9-inch square platform and the application of 2mm thick non-slip pads, designed to provide a stable and secure surface for speakers.
Image: Base Options for Stability. This image illustrates the three-point triangle base, detailing the interchangeable floor spikes for carpeted surfaces and rubber bases for wooden or tiled floors, ensuring stable support.
చిత్రం: కీలక లక్షణాలు ముగిసిందిview. This diagram points out the durable metal construction, 90 lbs weight capacity, integrated cable clip for wire management, and the stable three-point triangle base of the speaker stand.
ఆపరేటింగ్ సూచనలు
Once assembled, the Pyle PSTND35.5 Speaker Stands are ready for use. Consider the following for optimal performance:
- స్పీకర్ అనుకూలత: These stands are designed to accommodate various speakers, including models like the PLAY 1 and PLAY 3, in any orientation.
- సరైన ప్లేస్మెంట్: Position the stands to ensure the speakers are at ear level when seated, which typically provides the best audio experience.
- స్థిరత్వ తనిఖీ: Regularly verify that the stands are stable and that all connections (base, platform, height adjustment) are secure, especially after moving them or adjusting height.
- బరువు సామర్థ్యం: Do not exceed the maximum weight capacity of 90 lbs per stand to prevent instability or damage.
Image: Speaker Stands in a Studio Environment. This image shows the Pyle speaker stands supporting studio monitors in a typical audio production setup, illustrating their intended use for elevating sound.
నిర్వహణ
To ensure the longevity and continued performance of your speaker stands, follow these maintenance guidelines:
- శుభ్రపరచడం: Wipe the stands with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp గుడ్డను ఉపయోగించవచ్చు, ఆ తర్వాత వెంటనే ఆరబెట్టవచ్చు. రాపిడి క్లీనర్లు లేదా ద్రావకాలను నివారించండి.
- సాధారణ తనిఖీ: Periodically check all screws, bolts, and the safety pin for tightness. Ensure the non-slip pads are intact and providing adequate grip.
- నిల్వ: If storing the stands for an extended period, disassemble them and store in a dry, cool place to prevent rust or damage.
ట్రబుల్షూటింగ్
మీ స్పీకర్ స్టాండ్లతో మీకు సమస్యలు ఎదురైతే, ఈ క్రింది సాధారణ పరిష్కారాలను చూడండి:
- Stand Wobbles:
- Ensure all assembly screws, especially those connecting the base and platform to the main pole, are fully tightened.
- Verify that the height adjustment knob is firmly secured and the safety pin is correctly inserted.
- Check if the stand is on a level surface. Adjust the feet or reposition the stand if necessary.
- Ensure the correct base attachments (spikes for carpet, rubber feet for hard floors) are used.
- Speaker Slides on Platform:
- Confirm that the non-slip pads are properly applied to the platform.
- Ensure the speaker's weight is evenly distributed on the platform.
- Verify that the speaker's weight does not exceed the 90 lbs capacity.
- ఎత్తు సర్దుబాటు చేయడంలో ఇబ్బంది:
- Loosen the adjustment knob completely before attempting to raise or lower the pole.
- Ensure the safety pin is fully removed before adjustment and re-inserted after.
స్పెసిఫికేషన్లు
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| మోడల్ సంఖ్య | PSTND35.5 |
| ఎత్తు సర్దుబాటు పరిధి | 26 అంగుళాలు - 52 అంగుళాలు |
| Speaker Platform Size | 9 inches x 9 inches (Square) |
| Weight Capacity (per stand) | 90 పౌండ్లు (40.8 కిలోలు) |
| బేస్ ప్లేట్ కొలతలు | 18 inches x 18 inches x 18 inches (Triangle) |
| మెటీరియల్ | అల్లాయ్ స్టీల్, మెటల్ |
| రంగు | నలుపు |
| వస్తువు బరువు (స్టాండ్కు) | సుమారు 12.76 పౌండ్లు (5.8 కిలోలు) |
| Product Dimensions (max height) | 18"లీ x 18"వా x 52"హ |
వారంటీ మరియు మద్దతు
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Pyle website. For technical support or further assistance, please contact Pyle customer service through their official channels.
పైల్ అధికారిక Webసైట్: www.pyleusa.com
