KUS S3 Fuel and Water Tank Level Sensor (150mm) Instruction Manual

1. ఉత్పత్తి ముగిసిందిview

The KUS S3 Fuel and Water Tank Level Sensor is designed for accurate measurement of liquid levels in tanks. Constructed from durable SUS316 stainless steel, it offers excellent corrosion resistance, making it suitable for marine and other demanding applications. This sensor operates on the principle of a magnetic field to control a reed on-off switch, ensuring a long lifespan and reliable performance.

ముఖ్య లక్షణాలు:

• పొడవు: 150mm
• Signal Output: 0-190ohm
• Assembly: BSP 1 1/4" thread twist-in, or NPT thread twist-in
• రిజల్యూషన్: 21mm
• Material: SUS316 Stainless Steel
• Protection Rank: IP67
• ఆపరేటింగ్ ఉష్ణోగ్రత: -40°C నుండి +85°C

Figure 1: KUS S3 Fuel and Water Tank Level Sensor (150mm) with wiring.

వివరణాత్మక ఓవర్ కోసంview of the product and its features, please watch the following video:

2. సెటప్ మరియు ఇన్‌స్టాలేషన్

Proper installation is crucial for accurate readings and long-term performance. Follow these steps carefully:

1. ట్యాంక్ సిద్ధం చేయండి: Ensure the tank is empty and clean before beginning installation.
2. మౌంటు స్థానాన్ని నిర్ణయించండి: Select a flat surface on the top of the tank for mounting.
3. మార్క్ మరియు డ్రిల్: Use the provided gasket as a template to mark the center hole and screw holes. Drill the center hole with a 40mm opener. Drill smaller pilot holes for the screws.
4. Measure Tank Depth: Measure the internal depth of your tank from the mounting surface to the bottom. Ensure at least 1 inch of clearance between the float retaining collar and the tank bottom. The sensor length should be appropriate for your tank depth.
5. Install Gasket and Sensor: Place the gasket over the drilled holes. Insert the sensor into the tank, aligning the screw holes.
6. సెన్సార్‌ను సురక్షితం చేయండి: Fasten the screws in a sequence (e.g., diagonally) to ensure even pressure. Do not overtighten to prevent damage and ensure a leak-free seal.

ఇన్‌స్టాలేషన్‌పై దృశ్య మార్గదర్శిని కోసం, దయచేసి ఈ క్రింది వీడియోను చూడండి:

3. Wiring and Operation

The KUS S3 sensor provides a 0-190ohm resistance output. It can be connected to compatible fuel or water level gauges that accept this signal range.

వైరింగ్ సూచనలు:

• Connect the sensor's signal wire (typically blue or orange) to the gauge's signal input.
• Connect the sensor's ground wire (typically black) to the battery negative terminal and the gauge's ground input.
• Connect the gauge's positive power input (typically red) to the battery positive terminal.
• If your gauge has a backlight, connect its positive wire (typically orange) to a switched 12V or 24V positive source.

Once wired, the sensor's float mechanism will move with the liquid level, and the connected gauge will display the corresponding level. The gauge provides a smooth and consistent sweep for accurate readings.

4. నిర్వహణ

The KUS S3 sensor is designed for minimal maintenance due to its robust SUS316 stainless steel construction. However, periodic checks can ensure optimal performance:

• దృశ్య తనిఖీ: Periodically inspect the sensor for any physical damage, corrosion, or debris accumulation, especially if used in harsh environments.
• శుభ్రపరచడం: If necessary, gently clean the sensor rod and float with a soft cloth and appropriate cleaning solution for stainless steel. Avoid abrasive materials that could scratch the surface.
• కనెక్షన్ తనిఖీ: అన్ని విద్యుత్ కనెక్షన్లు సురక్షితంగా మరియు తుప్పు పట్టకుండా ఉండేలా చూసుకోండి.

5. ట్రబుల్షూటింగ్

If you encounter issues with your KUS S3 sensor, consider the following:

• సరికాని రీడింగ్‌లు:
  • Check for proper sensor length relative to tank depth.
  • Verify electrical connections are secure and correctly wired.
  • Ensure the float moves freely along the sensor rod without obstruction.
  • Confirm the connected gauge is compatible with a 0-190ohm resistance signal.
• No Reading:
  • Check power supply to the gauge and sensor.
  • పగుళ్లు లేదా వదులుగా ఉన్న కనెక్షన్ల కోసం వైరింగ్‌ను తనిఖీ చేయండి.
  • Test the sensor's resistance output directly with a multimeter if possible.
• Leaks at Mounting Point:
  • Ensure the gasket is properly seated and undamaged.
  • Verify screws are tightened evenly, but not excessively.

For further assistance, contact KUS customer support.

6. స్పెసిఫికేషన్లు

7. వారంటీ మరియు మద్దతు

For warranty information and technical support, please refer to the official KUS webసైట్ లేదా మీ అధీకృత డీలర్‌ను సంప్రదించండి. వారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రసీదును ఉంచండి.

సంప్రదింపు సమాచారం:

• KUS Americas Inc. Store on Amazon