డయాబ్లో ఎక్స్-రే గేమింగ్ చైర్ యూజర్ మాన్యువల్

పరిచయం

Welcome to the user manual for your new Diablo X-Ray Gaming Chair. This chair is designed to provide optimal comfort and ergonomic support for extended periods of gaming or work. Featuring advanced adjustability, high-quality materials, and a robust construction, the Diablo X-Ray 2.0 ensures a superior seating experience. Please read this manual carefully before assembly and use to ensure proper setup and to maximize the lifespan of your chair.

మూర్తి 1: ముందు view of the Diablo X-Ray Gaming Chair, showcasing its ergonomic design and black-grey color scheme.

భద్రతా మార్గదర్శకాలు

To ensure safe operation and prevent damage to the chair or injury, please observe the following guidelines:

• బరువు సామర్థ్యం: Do not exceed the maximum load capacity of 150 kg (approximately 330 lbs).
• సరైన ఉపయోగం: Use the chair only for its intended purpose of seating. Avoid standing on the chair or using it as a ladder.
• అసెంబ్లీ: Ensure all components are securely fastened before use. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
• పిల్లలు మరియు పెంపుడు జంతువులు: అసెంబ్లీ సమయంలో పిల్లలు మరియు పెంపుడు జంతువులను కుర్చీకి దూరంగా ఉంచండి.
• కదిలే భాగాలు: Be cautious of moving parts during adjustment to avoid pinching.
• స్థిరత్వం: Always ensure the chair is on a stable, level surface.

ప్యాకేజీ విషయాలు

Before beginning assembly, please verify that all components are present in your package.

• బ్యాక్‌రెస్ట్
• Seat Base with Armrests (pre-attached)
• స్టార్ బేస్
• కాస్టర్లు (5x)
• గ్యాస్ లిఫ్ట్ సిలిండర్
• గ్యాస్ లిఫ్ట్ కవర్
• కటి పిల్లో
• Headrest Pillow (Magnetic)
• అసెంబ్లీ హార్డ్‌వేర్ (స్క్రూలు, వాషర్లు, అల్లెన్ కీ)
• ఇన్స్ట్రక్షన్ మాన్యువల్

సెటప్ సూచనలు

Follow these steps carefully to assemble your Diablo X-Ray Gaming Chair. It is recommended to have a second person assist with some steps.

1. బేస్ అసెంబ్లీ:

   Insert the five casters into the holes at the end of each leg of the star base. Push firmly until they click into place. Place the gas lift cylinder into the center hole of the star base, then slide the gas lift cover over the cylinder.

   

   Figure 2: Detail of the robust chair base and smooth-rolling PFC 360 casters.
2. సీటును బేస్ కు అటాచ్ చేయండి:

   Carefully align the center hole of the seat base (which has the pre-attached armrests and mechanism) with the top of the gas lift cylinder. Gently lower the seat onto the cylinder until it is securely seated.

3. బ్యాక్‌రెస్ట్‌ని అటాచ్ చేయండి:

   Align the backrest with the mounting brackets on the seat base. Secure the backrest using the provided screws and washers. Tighten all screws firmly with the Allen key, but do not overtighten.

   

   చిత్రం 3: వెనుక view of the chair, highlighting the backrest design and sturdy construction.
4. Install Lumbar and Headrest Pillows:

   The lumbar pillow can be placed on the lower back of the chair for support. The magnetic headrest pillow attaches to the top of the backrest. Adjust their positions for personalized comfort.

   

   మూర్తి 4: వివరంగా view of the adjustable lumbar pillow and magnetic headrest, both made with memory foam for enhanced support.

Operating Your Chair

The Diablo X-Ray Gaming Chair offers multiple adjustment options to customize your seating experience.

1. Seat Height Adjustment (Tilttech Butterfly System)

To adjust the seat height, locate the lever on the right side, underneath the seat.

• To raise the seat: While seated, lift the lever and slightly lift your weight off the seat. The seat will rise. Release the lever at the desired height.
• To lower the seat: While seated, lift the lever and apply downward pressure. The seat will lower. Release the lever at the desired height.

2. Backrest Recline (Tilttech Gear)

The backrest can be reclined independently. Locate the recline lever on the right side of the chair, near the backrest hinge.

• To recline: Pull the lever upwards and lean back to the desired angle. Release the lever to lock the backrest in place.
• To return to upright position: Pull the lever upwards and lean forward. The backrest will return to its upright position. Release the lever to lock.

3. Tilt Function (Tilttech Swing)

The chair features a rocking/tilt function for relaxation.

• To activate tilt: Pull the same lever used for height adjustment (on the right side, under the seat) outwards. The chair will now allow rocking motion.
• To lock tilt: Push the lever inwards. The chair will lock in its upright position.
• Tilt Tension Adjustment: The round knob located underneath the seat, at the front, controls the tension of the tilt mechanism. Turn clockwise to increase tension (harder to tilt), counter-clockwise to decrease tension (easier to tilt).

మూర్తి 5: వైపు view illustrating the Tilttech Swing mechanism, allowing for comfortable rocking and recline.

4. 4D Armrest Adjustment (Armtech Quatro SoftTouch)

The armrests can be adjusted in four dimensions for optimal support.

• ఎత్తు సర్దుబాటు: Press the button on the side of the armrest support and move the armrest up or down. Release the button to lock.
• ముందుకు/వెనుకకు: ఆర్మ్‌రెస్ట్ ప్యాడ్‌ను ముందుకు లేదా వెనుకకు జారండి.
• Left/Right Swivel: Swivel the armrest pad left or right.
• Inward/Outward: Slide the armrest pad inward or outward.

మూర్తి 6: వివరంగా view of the Armtech Quatro SoftTouch 4D armrests, highlighting their multi-directional adjustability.

5. Lumbar Support Adjustment (ProSpine Support)

The integrated lumbar support can be adjusted for personalized back comfort. Locate the knob on the side of the backrest.

• Turn the knob clockwise to increase the lumbar support (push it further out).
• Turn the knob counter-clockwise to decrease the lumbar support (retract it).

నిర్వహణ మరియు సంరక్షణ

Regular maintenance will help prolong the life and appearance of your Diablo X-Ray Gaming Chair.

• శుభ్రపరచడం: సాధారణ శుభ్రపరచడం కోసం, కుర్చీని మృదువైన, d తో తుడవండి.amp cloth. For stains, use a mild soap solution and perform spot cleaning. Avoid harsh chemicals or abrasive cleaners, as they can damage the synthetic leather.
• మెటీరియల్ కేర్: The chair features HDS synthetic leather and perforated HDS Air material. These materials are designed for durability and breathability. Avoid direct sunlight exposure for prolonged periods to prevent fading.
• హార్డ్‌వేర్ తనిఖీ: అన్ని స్క్రూలు మరియు బోల్ట్‌లు బిగుతుగా ఉన్నాయని నిర్ధారించుకోవడానికి కాలానుగుణంగా వాటిని తనిఖీ చేయండి. అవసరమైతే తిరిగి బిగించండి.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth rolling.

Figure 7: Close-up of the HDS Air perforated synthetic leather, designed for enhanced breathability and comfort.

ట్రబుల్షూటింగ్

మీ కుర్చీతో మీకు ఏవైనా సమస్యలు ఎదురైతే, ఈ క్రింది సాధారణ సమస్యలు మరియు పరిష్కారాలను చూడండి.

సాంకేతిక లక్షణాలు

వారంటీ మరియు మద్దతు

Your Diablo X-Ray Gaming Chair comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, replacement parts, or warranty claims, please contact Diablo customer service through their official webమీరు ఉత్పత్తిని కొనుగోలు చేసిన సైట్ లేదా రిటైలర్.

Webసైట్: www.diablochairs.com