DJI Mavic Mini Propellers (CP.MA.00000133.01) Instruction Manual

1. ఉత్పత్తి ముగిసిందిview

These propellers are specifically designed for the DJI Mavic Mini drone. They are engineered to provide quieter flight and powerful thrust, ensuring optimal performance for your aircraft. This accessory is essential for maintaining flight stability and efficiency.

పెట్టెలో ఏముంది:

• Propeller (pair) ×2
• స్క్రూ × 12

Figure 1: Contents of the DJI Mavic Mini Propeller package, showing two pairs of propellers and a set of screws.

2. భద్రతా సమాచారం

• Always ensure propellers are securely attached before flight.
• Inspect propellers for any damage (cracks, bends, chips) before each flight. Replace immediately if damage is found.
• చేతులు మరియు ముఖాన్ని తిరిగే ప్రొపెల్లర్ల నుండి దూరంగా ఉంచండి.
• Use only genuine DJI Mavic Mini propellers to ensure compatibility and safe operation.
• Store spare propellers in a safe place to prevent warping or damage.

3. సెటప్ & ఇన్‌స్టాలేషన్

Proper installation of propellers is crucial for safe and stable flight. Follow these steps carefully:

1. Identify Propeller Types: The propellers are marked with 'A' or 'B' to indicate their type. Match these markings to the corresponding motor arms on your DJI Mavic Mini. Propellers with an 'A' marking should be installed on motor arms with 'A' markings, and 'B' propellers on 'B' marked arms.

Figure 2: Close-up of DJI Mavic Mini propellers, showing the 'A' and 'B' type markings for correct installation.
2. Remove Old Propellers: Using a small screwdriver (often included with your drone or propeller kit), carefully unscrew the two screws holding each propeller blade to the motor. Remove both blades of a pair if replacing.
3. Install New Propellers: Place the new propeller blades onto the motor arm, aligning the screw holes. Ensure the correct 'A' or 'B' type is used for each arm.


Figure 3: A propeller being installed on a DJI Mavic Mini drone motor arm using a screwdriver.

4. స్క్రూలతో భద్రపరచండి: Use the new screws provided with the propeller kit to secure the blades. Tighten the screws firmly but do not overtighten, as this can damage the motor or the propeller.
5. ఇన్‌స్టాలేషన్‌ను ధృవీకరించండి: Gently tug on each propeller to ensure it is securely fastened and does not wobble. The propellers should spin freely without obstruction.

4. ఆపరేటింగ్ పరిగణనలు

While propellers themselves do not have operational controls, their condition directly impacts drone performance. Always ensure your drone's propellers are in excellent condition before initiating flight. Damaged propellers can lead to unstable flight, reduced efficiency, and potential crashes. The DJI Mavic Mini is designed for quieter flight and powerful thrust with these specific propellers.

5. నిర్వహణ

• సాధారణ తనిఖీ: Visually inspect all propellers for any signs of wear, cracks, bends, or chips before and after every flight.
• శుభ్రపరచడం: If dust or debris accumulates on the propellers, gently wipe them clean with a soft, dry cloth. Avoid using harsh chemicals.
• నిల్వ: Store spare propellers flat and in a protective container to prevent bending or damage. Avoid placing heavy objects on them.
• భర్తీ: Replace propellers immediately if any damage is detected, even minor. It is recommended to replace both blades of a pair simultaneously for balanced flight.

6. ట్రబుల్షూటింగ్

7. స్పెసిఫికేషన్లు

8. వారంటీ & సపోర్ట్

For warranty information and technical support regarding your DJI Mavic Mini propellers or drone, please refer to the official DJI website or contact DJI customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

అధికారిక DJI మద్దతు: www.dji.com/support