Tanita Cooking Thermometer TT-583 GR Instruction Manual

1. పరిచయం

The Tanita Cooking Thermometer TT-583 GR is a precision instrument designed for accurate temperature measurement in various culinary applications. Its waterproof design and extended sensor allow for safe and convenient use, ensuring optimal cooking results. This manual provides essential information for the proper setup, operation, and maintenance of your thermometer.

2. ఉత్పత్తి ముగిసిందిview

The TT-583 GR features a long sensor probe, a clear digital display, and a convenient sensor holder that doubles as a handle. It also includes a magnet for easy storage.

Image 2.1: Tanita Cooking Thermometer TT-583 GR and its sensor holder.

2.1 భాగాలు మరియు విధులు

Image 2.2: Labeled components of the TT-583 GR thermometer.

1. హుక్ హోల్: Insert the tip of the sensor holder into this hole. This allows for measurement while keeping your hand further away from heat sources.
2. హోల్డ్ బటన్: Press this button during temperature measurement to freeze the displayed temperature value for easier reading and confirmation.
3. ఆన్/ఆఫ్ బటన్: Press to power the device on or off. The thermometer features an auto power-off function that activates after approximately 10 minutes of inactivity, or if the ambient temperature is below 45°C and the temperature change is less than 3°C.
4. ప్రదర్శన ప్రాంతం: The digital screen shows the temperature readings. It is designed for clear readability whether held in the left or right hand.

3. సెటప్

3.1 బ్యాటరీ ఇన్‌స్టాలేషన్

The Tanita TT-583 GR uses one CR2032 coin cell battery. A trial battery is included with your purchase.

1. Locate the battery compartment cover on the back of the thermometer unit.
2. Use a small coin or screwdriver to open the battery compartment.
3. CR2032 బ్యాటరీని పాజిటివ్ (+) వైపు పైకి ఎదురుగా ఉండేలా చొప్పించండి.
4. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను మార్చండి మరియు దాన్ని భద్రపరచండి.

Ensure the battery is correctly installed for proper device function.

4. ఆపరేషన్

4.1 ప్రాథమిక ఉష్ణోగ్రత కొలత

1. నొక్కండి ఆన్/ఆఫ్ థర్మామీటర్‌ను ఆన్ చేయడానికి బటన్.
2. Insert the stainless steel sensor probe into the food or liquid you wish to measure. The sensor is 14 cm long, allowing for deep insertion and safe distance from heat.
3. Read the temperature displayed on the digital screen. The display updates every 1 second.
4. To turn off the thermometer, press the ఆన్/ఆఫ్ button again. The device will also automatically power off after approximately 10 minutes of inactivity.

Image 4.1: Measuring the temperature of melted chocolate.

4.2 Using the HOLD Function

The HOLD function allows you to freeze the current temperature reading on the display.

1. While measuring temperature, press the పట్టుకోండి button. The current temperature will remain on the display.
2. To resume live temperature measurement, press the పట్టుకోండి మళ్ళీ బటన్.

4.3 Sensor Holder Usage

The included sensor holder can be used to extend your reach and protect your hands from heat.

1. Insert the tip of the thermometer's sensor holder into the hook hole located on the main unit.
2. This configuration allows you to hold the thermometer further away from hot surfaces or liquids during measurement.

చిత్రం 4.2: ఉదాamples of thermometer use for drip coffee, steak, vegetable washing, and baby milk.

5. నిర్వహణ

5.1 శుభ్రపరచడం

The Tanita TT-583 GR has an IPX2 waterproof rating, meaning it is protected against dripping water. To clean the thermometer:

• Wipe the sensor probe and main unit with a damp గుడ్డ.
• Do not immerse the entire unit in water or wash it under running water, as this may damage internal components.
• రాపిడి క్లీనర్లు లేదా ద్రావణాలను ఉపయోగించడం మానుకోండి.

5.2 నిల్వ

For convenient and space-saving storage, the thermometer features a built-in magnet.

• Attach the thermometer to a metallic surface, such as a refrigerator door or oven hood.
• Store the sensor holder with the thermometer when not in use.

Image 5.1: Thermometer dimensions, IPX2 waterproof rating, and magnetic storage feature.

5.3 బ్యాటరీ భర్తీ

When the display becomes dim or the thermometer stops functioning, replace the CR2032 battery following the instructions in Section 3.1.

6. ట్రబుల్షూటింగ్

• డిస్ప్లే లేదు / మసక డిస్ప్లే: Check battery installation. Replace the CR2032 battery if necessary.
• సరికాని రీడింగ్‌లు: Ensure the sensor probe is fully inserted into the substance being measured. Avoid measuring near strong electromagnetic fields.
• Thermometer Does Not Turn On: Verify battery is correctly installed and has sufficient charge.

ఈ దశలను ప్రయత్నించిన తర్వాత కూడా సమస్యలు కొనసాగితే, దయచేసి కస్టమర్ సపోర్ట్‌ను సంప్రదించండి.

7. స్పెసిఫికేషన్లు

8. వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the official Tanita webసైట్‌లో లేదా మీ స్థానిక రిటైలర్‌ను సంప్రదించండి. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.

అదనపు ఉత్పత్తి సమాచారం కోసం, మీరు సందర్శించవచ్చు Tanita Brand Store.