ఇన్స్ట్రక్షన్ మాన్యువల్

ఉత్పత్తి ముగిసిందిview

The Unity Automotive 11725 Front Left Complete Strut Assembly is engineered to provide a hassle-free solution for replacing your vehicle's suspension. This preassembled unit includes all necessary components, such as the top mount, bearing plate, bumper, insulators, and coil spring, eliminating the need for specialized tools during installation. It is designed to restore your vehicle's factory ride height and ensure a stable, comfortable ride.

Unity Automotive has over 50 years of experience in manufacturing high-quality aftermarket automotive parts, focusing on durability and reliability.

కీ ఫీచర్లు

• Preassembled Design: Includes top mount, bearing plate, bumper, insulators, and coil spring for a complete unit.
• Restores Ride Quality: Engineered to restore factory ride height and provide a stable, comfortable driving experience.
• Trouble-Free Installation: Designed for superior fit and eliminates the need for specialty tools.
• Hassle-Free Repair: All new components ensure a straightforward replacement process.
• వాహన నిర్దిష్ట అమరిక: Ensures precise compatibility with specified vehicle models.

ప్యాకేజీ విషయాలు

Upon opening the package, you will find the following item:

• (1) Unity Automotive 11725 Front Left Complete Strut Assembly

వాహన అనుకూలత

This Unity Automotive 11725 Front Left Complete Strut Assembly is compatible with the following vehicle:

• తయారు చేయండి: డాడ్జ్
• మోడల్: డార్ట్
• సంవత్సరాలు: 2013-2016
• స్థానం: Front Driver Side (Left)

అమరిక గమనిక: ఈ భాగం మినహాయిస్తుంది SE, SXT, and Rallye Models of the Dodge Dart.

ఇన్‌స్టాలేషన్ గైడ్

ముఖ్యమైన భద్రతా సమాచారం: Installation of automotive suspension components should only be performed by qualified individuals with proper tools and safety equipment. Failure to follow proper procedures can result in serious injury or damage to the vehicle. Always consult a professional mechanic if you are unsure about any step.

అవసరమైన సాధనాలు (సాధారణం):

• వాహన జాక్ మరియు జాక్ స్టాండ్‌లు
• వీల్ చాక్స్
• సాకెట్ రెంచ్ సెట్
• టార్క్ రెంచ్
• పెనెట్రేటింగ్ ఆయిల్
• భద్రతా అద్దాలు మరియు చేతి తొడుగులు

సాధారణ ఇన్‌స్టాలేషన్ దశలు:

1. వాహనాన్ని సిద్ధం చేయండి: Park the vehicle on a level surface, engage the parking brake, and chock the rear wheels. Loosen the lug nuts on the front left wheel.
2. లిఫ్ట్ వాహనం: Safely lift the front of the vehicle using a jack and secure it with jack stands. Remove the front left wheel.
3. భాగాలను డిస్‌కనెక్ట్ చేయండి: Locate the existing strut assembly. Disconnect any brake lines, ABS sensor wires, or sway bar links attached to the strut.
4. పాత స్ట్రట్ తొలగించండి: Unbolt the lower mounting bolts connecting the strut to the steering knuckle. Then, unbolt the upper mounting nuts from the strut tower under the hood. Carefully remove the old strut assembly from the vehicle.
5. కొత్త స్ట్రట్‌ను ఇన్‌స్టాల్ చేయండి: Position the new Unity Automotive 11725 complete strut assembly into the strut tower. Secure the upper mounting nuts, but do not fully tighten yet.
6. Connect Lower Mount: Align the lower mounting holes of the new strut with the steering knuckle. Insert and hand-tighten the lower mounting bolts.
7. భాగాలను తిరిగి కనెక్ట్ చేయండి: Reattach any brake lines, ABS sensor wires, and sway bar links that were disconnected.
8. టార్క్ ఫాస్టెనర్లు: Refer to your vehicle's service manual for specific torque specifications. Fully tighten all upper and lower mounting bolts/nuts to the manufacturer's recommended torque.
9. చక్రాన్ని తిరిగి ఇన్‌స్టాల్ చేయండి: Reinstall the front left wheel and hand-tighten the lug nuts.
10. దిగువ వాహనం: Safely lower the vehicle to the ground. Fully tighten the lug nuts to the manufacturer's specifications.
11. తుది తనిఖీ: After installation, it is highly recommended to have a professional alignment performed to ensure proper vehicle handling and tire wear.

Image: The Unity Automotive 11725 Front Left Complete Strut Assembly, showing the integrated coil spring, strut body, and mounting points. This preassembled unit simplifies the installation process by including all necessary components.

నిర్వహణ మరియు సంరక్షణ

The Unity Automotive 11725 Complete Strut Assembly is designed for long-lasting reliability and typically requires minimal maintenance after proper installation. However, regular vehicle inspections are recommended to ensure optimal performance and safety.

• సాధారణ తనిఖీలు: Periodically inspect the strut assembly for any signs of damage, leaks, or excessive wear. Check the rubber boots for cracks and ensure all mounting bolts remain tight.
• సమలేఖనం: After replacing any suspension component, it is crucial to have a professional wheel alignment performed. This ensures correct steering, handling, and prevents premature tire wear.
• శుభ్రపరచడం: Keep the strut assembly free from excessive dirt, salt, and debris, especially in harsh weather conditions. A simple rinse with water during vehicle washing is usually sufficient.
• ఓవర్‌లోడింగ్‌ను నివారించండి: Do not exceed your vehicle's Gross Vehicle Weight Rating (GVWR) as this can put undue stress on suspension components, including the strut assembly.

సాధారణ సమస్యలను పరిష్కరించడం

If you experience any issues after installing your new strut assembly, consider the following common problems and their potential solutions. Always consult a certified mechanic for complex issues or if you are unsure.

ఉత్పత్తి లక్షణాలు

భద్రతా సమాచారం

Always prioritize safety when working on your vehicle's suspension system. Improper installation or handling can lead to serious injury or vehicle damage.

• ప్రొఫెషనల్ ఇన్‌స్టాలేషన్ సిఫార్సు చేయబడింది: If you are not experienced with automotive repairs, it is highly recommended to have this part installed by a certified professional mechanic.
• సరైన సాధనాలను ఉపయోగించండి: Always use appropriate and well-maintained tools for the job, including a reliable jack, sturdy jack stands, and a torque wrench.
• వ్యక్తిగత రక్షణ పరికరాలు: Wear safety glasses, gloves, and appropriate work attire to protect yourself from potential hazards.
• వాహన స్థిరత్వం: Ensure the vehicle is securely supported on jack stands before beginning any work underneath. Never rely solely on a jack.
• టార్క్ లక్షణాలు: Always tighten fasteners to the vehicle manufacturer's specified torque settings. Overtightening or undertightening can lead to component failure.
• ప్రతిపాదన 65 హెచ్చరిక: ఈ ఉత్పత్తిలో క్యాన్సర్, పుట్టుకతో వచ్చే లోపాలు లేదా ఇతర పునరుత్పత్తికి హాని కలిగించడానికి కాలిఫోర్నియా రాష్ట్రానికి తెలిసిన రసాయనాలు ఉండవచ్చు. హ్యాండిల్ చేసిన తర్వాత చేతులు కడుక్కోండి.

వారంటీ మరియు మద్దతు

For information regarding the warranty of your Unity Automotive 11725 Front Left Complete Strut Assembly, please refer to the documentation included with your purchase or visit the official Unity Automotive website. For technical support or assistance with installation, please contact Unity Automotive customer service directly.

సంప్రదింపు సమాచారం: దయచేసి తయారీదారు అధికారిని చూడండి website or product packaging for the most current contact details for customer support.