పరిచయం
This manual provides instructions for the LEKATO WS-10 Wireless Guitar System, a rechargeable 2.4GHz wireless audio system designed for musical instruments, offering low noise and latency. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.
పెట్టెలో ఏముంది
- LEKATO WS-10 Wireless Transmitter
- LEKATO WS-10 Wireless Receiver
- Dual-head USB Charging Cable
- వినియోగదారు మాన్యువల్

Image: The LEKATO WS-10 Wireless Guitar System, showing both the transmitter and receiver units.
కీ ఫీచర్లు
- 2.4GHz వైర్లెస్ ట్రాన్స్మిషన్: Utilizes 2.4GHz ISM band for stable, low-latency, and low-noise audio transmission.
- పునర్వినియోగపరచదగిన బ్యాటరీ: Built-in lithium polymer batteries provide over 5 hours of working time. Includes a dual-head USB cable for simultaneous charging of both units.
- Multiple Channel Support: Supports up to 6 sets of devices working simultaneously without interference. One transmitter can send signals to multiple receivers.
- విస్తరించిన ప్రసార పరిధి: Offers an effective transmission range of approximately 100 feet (30 meters) with no noticeable lag or signal loss.
- అధిక-నాణ్యత ఆడియో: Features 105dB dynamic range, 24-bit/48KHz high-quality audio broadcast, and a 20Hz-22kHz full-screen response.
- బహుముఖ అనుకూలత: Equipped with a 280° rotatable 1/4" plug, making it suitable for various electronic musical instruments such as guitars, basses, mixers, violins, and electronic drums.

Image: Visual representation of the system's technical specifications, highlighting 100 feet transmission distance, 24-bit/48KHz audio, 12ms latency, and 105dB dynamic range.
సెటప్ సూచనలు
- యూనిట్లను ఛార్జ్ చేయండి: Before first use, fully charge both the transmitter and receiver using the provided dual-head USB charging cable. A red LED indicates low battery or charging. A green LED indicates successful pairing.
- పవర్ ఆన్: Locate the power button on the side of both the transmitter and receiver. Slide the button up to power on each unit.
- స్వయంచాలక జత చేయడం: The units are designed to pair automatically upon powering on. A solid green LED light on both units indicates successful pairing.
- Manual Pairing (If Needed): If the units do not pair automatically (LED flashes slowly), press the "Pair" button on both the transmitter and receiver simultaneously. The LED will flash fast during pairing and turn solid green once paired.
- Connect to Instrument: Plug the transmitter (marked "Transmitter") into your instrument's 1/4" output jack. The 280° rotatable plug allows for flexible positioning.
- కనెక్ట్ చేయండి Ampలిఫైయర్/రిసీవర్: Plug the receiver (marked "Receiver") into your amplifier's 1/4" input jack or other audio input device.

Image: The transmitter and receiver units connected to a dual USB cable for charging, illustrating the built-in rechargeable battery feature.

Image: A LEKATO wireless transmitter plugged into an electric guitar and the receiver plugged into an amplifier, illustrating the simple plug-and-play setup.
ఆపరేటింగ్ సూచనలు
- పవర్ ఆన్/ఆఫ్: Use the side power switch to turn the units on or off.
- ఛానెల్ ఎంపిక: The system automatically selects the best available channel. For manual channel adjustment or re-pairing, press the "Pair" button.
- బహుళ-పరికర వినియోగం: Up to six pairs of LEKATO WS-10 systems can operate simultaneously in the same area. Ensure each pair is on a different channel to avoid interference.
- ఒకటి నుండి అనేక మోడ్: A single transmitter can broadcast its signal to multiple receivers. This is useful for sending one instrument's signal to several amplifiers or mixing consoles.
- సిగ్నల్ పరిధి: Maintain a distance within 100 feet (30 meters) for optimal performance. Obstacles and other 2.4GHz devices may affect range and signal quality.

Image: A diagram illustrating the system's capability to support 6 simultaneous channels and a single transmitter broadcasting to multiple receivers, suitable for band setups.

Image: The LEKATO wireless system featuring a 280° rotatable plug, demonstrating its compatibility with a variety of musical instruments including guitars, keyboards, and mixers.
నిర్వహణ
- ఛార్జింగ్: Recharge the units when the battery indicator shows low power (red LED). Avoid overcharging for extended battery life.
- శుభ్రపరచడం: Wipe the units with a soft, dry cloth. Do not use liquid cleaners or solvents.
- నిల్వ: ఉపయోగంలో లేనప్పుడు ప్రత్యక్ష సూర్యకాంతి మరియు తీవ్రమైన ఉష్ణోగ్రతలకు దూరంగా చల్లని, పొడి ప్రదేశంలో వ్యవస్థను నిల్వ చేయండి.
- జాగ్రత్తగా నిర్వహించండి: Avoid dropping the units or subjecting them to strong impacts.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| No Sound / Intermittent Signal |
|
|
| పేలవమైన ధ్వని నాణ్యత / శబ్దం |
|
|
స్పెసిఫికేషన్లు
| బ్రాండ్ | లేకాటో |
| మోడల్ సంఖ్య | WS-10 (YYx-441) |
| ట్రాన్స్మిషన్ ఫ్రీక్వెన్సీ | 2.4GHz ISM బ్యాండ్ |
| ప్రసార పరిధి | 100 అడుగుల (30 మీటర్లు) వరకు |
| జాప్యం | Low (typically <12ms) |
| డైనమిక్ రేంజ్ | 105dB |
| ఆడియో నాణ్యత | 24-bit/48KHz |
| ఫ్రీక్వెన్సీ రెస్పాన్స్ | 20Hz-22kHz |
| బ్యాటరీ రకం | లిథియం పాలిమర్ (చేర్చబడింది) |
| పని సమయం | 5 గంటలకు పైగా |
| కనెక్టర్ | 1/4" TS (rotatable 280°) |
| వస్తువు బరువు | 6.3 ఔన్సులు |
| UPC | 793811851892 |
ఉత్పత్తి ప్రదర్శన వీడియో
Video: A detailed demonstration of the LEKATO WS-10 Wireless Guitar System, covering its ease of use, pairing process, sound quality, and range capabilities in various environments. The video highlights the plug-and-play functionality and the system's performance with an electric guitar.
వారంటీ మరియు మద్దతు
LEKATO products are designed for reliability and performance. For any technical support or warranty inquiries, please refer to the contact information provided with your purchase or visit the official LEKATO webవారంటీ క్లెయిమ్ల కోసం దయచేసి మీ కొనుగోలు రుజువును మీ వద్ద ఉంచుకోండి.
గమనిక: నిర్దిష్ట వారంటీ నిబంధనలు ప్రాంతం మరియు రిటైలర్ను బట్టి మారవచ్చు.





