GYSFLASH 30.12 PL Smart Charger User Manual

1. పరిచయం

Welcome to the user manual for the GYSFLASH 30.12 PL, a versatile smart charger designed for 12V lead-acid and lithium iron phosphate (LiFePO4) batteries. This manual provides essential information for safe and effective operation, setup, and maintenance of your charger. Please read this manual thoroughly before using the device.

2. ముఖ్యమైన భద్రతా సూచనలు

To ensure safe operation and prevent damage to the charger or battery, observe the following safety precautions:

• Always read the entire instruction manual before operating the charger.
• Ensure adequate ventilation during charging to prevent heat buildup.
• Avoid short-circuiting the charging clamps.
• The charger is equipped with reverse polarity protection; however, always connect the red (+) clamp to the positive (+) terminal and the black (-) clamp ప్రతికూల (-) టెర్మినల్‌కు.
• Disconnect the charger from the mains power before connecting or disconnecting the battery clamps.
• వర్షం లేదా అధిక తేమ ఛార్జర్‌ను బహిర్గతం చేయవద్దు.
• పిల్లలకు దూరంగా ఉంచండి.
• పునర్వినియోగపరచలేని బ్యాటరీలను ఛార్జ్ చేయడానికి ప్రయత్నించవద్దు.

3. ఉత్పత్తి ముగిసిందిview

The GYSFLASH 30.12 PL is a high-power, auto-sensing battery support unit with advanced features for various battery types and applications.

ముఖ్య లక్షణాలు:

• Double Technology: Compatible with both 12V lead-acid (GEL, AGM, liquid, calcium) and lithium iron phosphate (LiFePO4) batteries.
• అధిక పవర్ అవుట్‌పుట్: Delivers a continuous 30 A at 100% duty cycle (40°C).
• Three Charging Currents: Selectable charging currents of 7 A, 15 A, and 30 A to match battery capacity.
• షోరూమ్ మోడ్: Provides a stable power supply of up to 30A for maintaining battery charge in exhibited vehicles or during diagnostic procedures.
• సరఫరా మోడ్: Offers a stable on-board power supply, useful for maintaining vehicle electronics during battery changes or software updates.
• Wide Battery Capacity Range: Charges 12V lead-acid batteries from 15 Ah to 375 Ah and LiFePO4 batteries from 7 Ah to 375 Ah.
• మెమరీ బ్యాకప్: Retains vehicle memory information during battery removal.
• Optimized Battery Retention: Can remain connected to the battery during hibernation with an auto-restart function in case of power failure.
• తక్కువ వాల్యూమ్tagఇ ఛార్జింగ్: Capable of initiating charging for batteries as low as 2 V.

Figure 1: Front panel of the GYSFLASH 30.12 PL charger, displaying mode selection, battery type indicators, and charging current options.

4. సెటప్ మరియు కనెక్షన్

4.1 అన్‌ప్యాకింగ్

Carefully unpack the GYSFLASH 30.12 PL charger and inspect for any visible damage. Retain the packaging for future storage or transport.

4.2 బ్యాటరీకి కనెక్ట్ చేయడం

1. Ensure the charger's power cord is disconnected from the mains power outlet.
2. కనెక్ట్ చేయండి ఎరుపు (+) ఛార్జింగ్ clamp సురక్షితంగా సానుకూల (+) బ్యాటరీ యొక్క టెర్మినల్.
3. కనెక్ట్ చేయండి నలుపు (-) ఛార్జింగ్ clamp సురక్షితంగా ప్రతికూల (-) బ్యాటరీ యొక్క టెర్మినల్.
4. Verify that both connections are firm and free from corrosion.

4.3 Connecting to Mains Power

ఒకసారి బ్యాటరీ clamps are securely connected, plug the charger's power cord into a suitable 230V AC, 50/60Hz power outlet.

Figure 2: GYSFLASH 30.12 PL connected to a vehicle battery for charging or support.

5. ఆపరేటింగ్ సూచనలు

5.1 ఆటోమేటిక్ ఛార్జింగ్

The GYSFLASH 30.12 PL features an integrated temperature sensor that automatically adjusts charging parameters based on the ambient temperature, optimizing charging efficiency and battery life.

5.2 మోడ్ ఎంపిక

ఉపయోగించండి "మోడ్" button on the charger's front panel to select the appropriate charging program for your battery type:

• Pb (Lead-Acid): Select this mode for 12V lead-acid batteries, including GEL, AGM, liquid, and calcium types. Suitable for capacities from 15 Ah to 375 Ah.
• LiFePO4 (Lithium Iron Phosphate): Select this mode for 12V lithium iron phosphate batteries. Suitable for capacities from 7 Ah to 375 Ah.

5.3 Charging Current Selection

After selecting the battery type, choose one of the three available charging currents (7 A, 15 A, or 30 A) based on the battery's capacity and desired charging speed. Higher currents charge faster but should be appropriate for the battery's specifications.

5.4 Showroom Mode

This mode is designed to provide a stable power supply of up to 30A. It is ideal for maintaining the battery charge in vehicles displayed in showrooms or during diagnostic procedures, preventing battery drain without overcharging.

5.5 సరఫరా విధానం

The Supply Mode provides a stable on-board power supply to the vehicle's electrical system. This is particularly useful for maintaining power to vehicle electronics when the battery is being changed or during software updates, preventing loss of settings or data.

6. ఛార్జింగ్ ప్రక్రియ

1. Connect the charger to the battery terminals, ensuring correct polarity (red to positive, black to negative).
2. Plug the charger's power cord into a mains power outlet.
3. నొక్కండి "మోడ్" button to select the appropriate battery type (Pb for lead-acid or LiFePO4 for lithium).
4. Select the desired charging current (7 A, 15 A, or 30 A) based on your battery's requirements.
5. The charger will automatically begin the charging cycle. Monitor the progress indicators on the display.
6. Once the charging cycle is complete, first disconnect the charger from the mains power outlet.
7. తరువాత, నలుపు (-) cl ని డిస్కనెక్ట్ చేయండిamp బ్యాటరీ నుండి, తరువాత ఎరుపు (+) clamp.

7. నిర్వహణ

• Keep the charger clean and dry. Wipe the casing తో a సాఫ్ట్, damp వస్త్రం. కఠినమైన రసాయనాలు లేదా అబ్రాసివ్‌లను ఉపయోగించవద్దు.
• Store the charger in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
• Do not attempt to open the charger casing or perform any internal repairs. Refer all servicing to qualified personnel.
• ఛార్జింగ్ కేబుల్స్ మరియు cl లను క్రమం తప్పకుండా తనిఖీ చేయండిamps for any signs of damage, wear, or corrosion. Replace damaged components immediately.

8. ట్రబుల్షూటింగ్

If you encounter issues with your GYSFLASH 30.12 PL, refer to the table below for common problems and solutions.

9. సాంకేతిక లక్షణాలు

10. వారంటీ మరియు మద్దతు

The GYSFLASH 30.12 PL is covered by a 2-year local warranty. For technical assistance, warranty claims, or service inquiries, please contact your authorized GYS dealer or the official GYS support center. Please retain your proof of purchase for warranty validation.

For additional information and resources, please visit the official GYS webసైట్.