1. పరిచయం
The Laserliner DigiLevel Laser G80 is a digital electronic spirit level designed for precise horizontal and vertical alignment, as well as accurate angle transfer. This device features an integrated green laser line for extending the measuring surface, a magnetic base for hands-free operation on metallic structures, and acoustic guidance for convenient use. Its 80 cm length makes it suitable for a wide range of applications in various trades.
2. భద్రతా సూచనలు
Please read these safety instructions carefully before using the device. Failure to follow these instructions may result in injury or damage to the device.
- లేజర్ రేడియేషన్: This device uses a Class 2 laser. Do not look directly into the laser beam or direct it towards other people. Eye protection is recommended when working with lasers.
- బ్యాటరీలు: Ensure correct battery polarity when inserting. Do not mix old and new batteries or different types of batteries. Remove batteries if the device will not be used for an extended period.
- నిర్వహణ: Do not attempt to open or modify the device. Repairs should only be performed by authorized personnel.
- పర్యావరణం: Use the device within the specified operating temperature range (0°C to 40°C). Avoid exposure to extreme temperatures, moisture, or strong vibrations.
3. ఉత్పత్తి ముగిసిందిview
3.1 భాగాలు
The DigiLevel Laser G80 consists of the following main components:
- డిజిటల్ డిస్ప్లే
- Control Buttons (UNIT, REF, CAL, HOLD, Power/Backlight)
- Horizontal and Vertical Vials
- Green Laser Output
- మాగ్నెటిక్ బేస్
- బ్యాటరీ కంపార్ట్మెంట్
చిత్రం 1: పైగాview of the Laserliner DigiLevel Laser G80.
Figure 2: The DigiLevel Laser G80, its protective carrying bag, and AAA batteries.
3.2 డిస్ప్లే మరియు బటన్లు
The digital display provides clear readings and indicators. The buttons allow for various functions and settings.
Figure 3: Close-up of the backlit digital display, showing angle measurement and battery status.
Figure 4: The automatic 180° flip display feature for convenient overhead measurements.
- UNIT బటన్: Press to cycle through measurement units (degrees, %, mm/m).
- REF Button: Press to set the current angle as a reference (0°) for relative measurements.
- CAL బటన్: Press and hold to enter calibration mode for maintaining accuracy.
- హోల్డ్ బటన్: Press to freeze the current measurement on the display.
- పవర్ బటన్ (⑂): Press to turn the device on/off. Short press to activate/deactivate backlight.
4. సెటప్
4.1 బ్యాటరీ ఇన్స్టాలేషన్
- Locate the battery compartment cover on the device.
- కవర్ తెరవండి.
- Insert two (2) 1.5V LR03 (AAA) batteries, ensuring correct polarity (+/-).
- బ్యాటరీ కంపార్ట్మెంట్ కవర్ను సురక్షితంగా మూసివేయండి.
5. ఆపరేటింగ్ సూచనలు
5.1 పవర్ ఆన్/ఆఫ్
Press the Power button (⑂) to turn the device on. Press and hold the Power button to turn it off.
5.2 ప్రాథమిక కొలత
Place the DigiLevel Laser G80 on the surface to be measured. The digital display will show the angle of inclination. The display automatically rotates 180° for overhead measurements.
5.3 యూనిట్ ఎంపిక
నొక్కండి యూనిట్ button to switch between different measurement units: degrees (°), percentage (%), and mm/m.
5.4 Reference Function (REF)
To measure relative angles, place the device on a surface and press the REF button. The display will show 0.0°, and subsequent measurements will be relative to this set reference angle. Press REF again to return to absolute measurement.
5.5 Calibration (CAL)
For sustained accuracy, periodic calibration is recommended. Refer to the full user manual for detailed calibration steps. Generally, this involves placing the device on a level surface, initiating calibration, rotating 180°, and confirming.
5.6 లేజర్ ఫంక్షన్
The integrated green laser line extends the measuring surface, allowing for precise alignment over longer distances. Activate the laser by pressing the dedicated laser button (often integrated with the power button or a separate button). The laser module is located at one end of the level.
Figure 5: The green laser module projecting a line for extended measurement.
Figure 6: The DigiLevel Laser G80 in use, projecting a green laser line onto a wall for alignment.
5.7 Acoustic Guidance
The device provides acoustic signals to assist with alignment at specific angles (0°, 45°, 90°). Three different tones indicate these angles, allowing for hands-free alignment without constantly watching the display.
Figure 7: Illustration of 360° angle measurement and acoustic signals at key angles (0°, 45°, 90°, 135°, 180°).
5.8 హోల్డ్ ఫంక్షన్
నొక్కండి పట్టుకోండి button to freeze the current measurement on the display. This is useful for taking readings in difficult-to-view positions. Press పట్టుకోండి again to release the measurement.
Figure 8: The 'Hold Angle' function, allowing the current measurement to be frozen on the display.
5.9 మాగ్నెటిక్ బేస్
The integrated magnetic base allows the device to be securely attached to metallic surfaces, enabling hands-free operation for increased convenience and precision.
Figure 9: The magnetic base provides secure attachment to metal surfaces.
6 అప్లికేషన్లు
The Laserliner DigiLevel Laser G80 is suitable for a variety of professional and DIY applications, including:
- Carpentry and Joinery: Precise alignment of wooden structures, frames, and furniture.
- ప్లాస్టార్ బోర్డ్ ఇన్స్టాలేషన్: Ensuring level and plumb surfaces for wall and ceiling panels.
- రూఫింగ్: Measuring and transferring roof pitches and angles.
- పెయింటింగ్: Establishing level lines for decorative elements or wall preparation.
- సాధారణ నిర్మాణం: Any task requiring accurate horizontal, vertical, or angle measurements.
Figure 10: Using the laser line to align multiple picture frames on a wall.
Figure 11: The spirit level used for vertical alignment, ensuring plumb surfaces.
Figure 12: Measuring and aligning on an angled ceiling or sloped surface.
Figure 13: Acoustic guidance assists in leveling shelves, indicated by sound waves.
Figure 14: Acoustic feedback helps in precisely aligning cabinets during installation.
7. నిర్వహణ
- శుభ్రపరచడం: పరికరాన్ని మృదువైన, డితో తుడవండిamp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
- నిల్వ: Store the device in its carrying bag in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods.
- తనిఖీ: ఏదైనా నష్టం సంకేతాల కోసం పరికరాన్ని క్రమం తప్పకుండా తనిఖీ చేయండి.
8. ట్రబుల్షూటింగ్
- పరికరం ఆన్ చేయదు: బ్యాటరీ ఇన్స్టాలేషన్ను తనిఖీ చేయండి మరియు బ్యాటరీలు ఖాళీ కాలేదని నిర్ధారించుకోండి. అవసరమైతే భర్తీ చేయండి.
- సరికాని రీడింగ్లు: Perform a calibration as described in the full user manual. Ensure the device is placed on a stable surface.
- Laser not visible: Check battery level. Ensure the laser output is not obstructed.
9. స్పెసిఫికేషన్లు
| మోడల్ సంఖ్య | 081.257A |
| పొడవు | 80 సెం.మీ |
| లేజర్ రకం | Green Line Laser, Class 2, <1 mW |
| లేజర్ తరంగదైర్ఘ్యం | 515 ఎన్ఎమ్ |
| Electronic Measurement Accuracy | ± 0.1° at 0°…1° and 89°…90°, ± 0.2° at 1°…89° |
| Vial Accuracy | ± 0.5 మిమీ/మీ |
| ప్రదర్శన ఖచ్చితత్వం | 1 దశాంశ స్థానం |
| విద్యుత్ సరఫరా | 2 x 1.5V LR03 (AAA) batteries |
| ఆపరేటింగ్ ఉష్ణోగ్రత | 0°C నుండి 40°C |
| మెటీరియల్ | అల్యూమినియం |
| బరువు | 966 గ్రాములు |
10. ప్యాకేజీ విషయాలు
The Laserliner DigiLevel Laser G80 package includes:
- DigiLevel Laser G80 Digital Electronic Spirit Level
- 2 x 1.5V LR03 (AAA) బ్యాటరీలు
- క్యారీయింగ్ బ్యాగ్
11. వారంటీ మరియు మద్దతు
Warranty information for the Laserliner DigiLevel Laser G80 is typically provided with the product at the time of purchase or can be obtained directly from the manufacturer, Laserliner. For technical support, please refer to the contact information provided in your product packaging or visit the official Laserliner webసైట్.
