ట్రూ 970103 Lae Sn4B40P3-Y T3 4.0M ప్రోబ్ యూజర్ మాన్యువల్

పరిచయం

This manual provides essential information for the proper installation, operation, and maintenance of your True 970103 Lae Sn4B40P3-Y T3 4.0M Probe. This product is a specialized component designed for food service supply applications, originating from Italy. It is supplied as a single unit with specific package dimensions of 4.0" (L) x 6.0" (W) x 9.0" (H).

భద్రతా సమాచారం

Please read and understand all safety instructions before using the probe. Failure to follow these instructions may result in damage to the product, property, or personal injury.

• Always ensure the power to the equipment is disconnected before installing or removing the probe.
• Handle the probe with care to avoid bending or damaging the cable or sensor tip.
• Do not expose the probe to temperatures or environments outside its specified operating range.
• Keep the probe away from water or other liquids unless specifically designed for immersion.
• Only use the probe for its intended purpose as a temperature sensing device in compatible systems.

ఉత్పత్తి ముగిసిందిview

The True 970103 Lae Sn4B40P3-Y T3 4.0M Probe is a critical component for accurate temperature measurement in various food service applications. It consists of a long, coiled yellow cable connected to a grey sensor tip.

Image: The True 970103 probe, showing its coiled yellow cable and the grey sensor tip. The cable is neatly bundled, indicating its length and flexibility for various installations.

పెట్టెలో ఏముంది

• 1 x True 970103 Lae Sn4B40P3-Y T3 4.0M Probe (Replacement Part)

సెటప్

The True 970103 probe is designed for integration into existing food service equipment. Follow these general steps for setup:

1. తయారీ: Ensure the equipment where the probe will be installed is turned off and disconnected from its power source.
2. స్థానం: Identify the designated port or area for the temperature probe within your system. Refer to your equipment's specific manual for precise installation points.
3. కనెక్షన్: Carefully insert the probe's connector into the corresponding receptacle. Ensure a secure and firm connection to prevent signal loss or inaccurate readings.
4. రూటింగ్: Route the probe cable in a manner that avoids kinks, sharp bends, or exposure to excessive heat or moving parts. Secure the cable if necessary to prevent accidental dislodgement.
5. ధృవీకరణ: Once installed, reconnect power to your equipment and perform a system check to confirm the probe is recognized and providing readings.

ఆపరేటింగ్ సూచనలు

Once properly installed, the True 970103 probe operates by continuously monitoring temperature within its environment. Its operation is typically passive, providing data to a connected control system or display unit.

• నిరంతర పర్యవేక్షణ: The probe will automatically transmit temperature data to the connected system.
• డేటా వివరణ: Refer to your equipment's display or control interface to read the temperature values provided by the probe.
• సిస్టమ్ ఇంటిగ్రేషన్: The probe is designed to work seamlessly with compatible True brand or other food service equipment that utilizes this specific probe type.

నిర్వహణ మరియు సంరక్షణ

Proper maintenance ensures the longevity and accuracy of your True 970103 probe.

• శుభ్రపరచడం: If the probe tip or cable becomes soiled, gently wipe it with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, especially near the connector.
• తనిఖీ: Periodically inspect the probe cable for any signs of wear, cuts, or damage. Check the sensor tip for any physical deformities.
• నిల్వ: If the probe is removed from service, coil the cable loosely and store it in a clean, dry place away from extreme temperatures and direct sunlight.
• ఒత్తిడిని నివారించండి: Do not pull on the cable to disconnect the probe. Always grasp the connector firmly.

ట్రబుల్షూటింగ్

If you experience issues with your True 970103 probe, consider the following common problems and solutions:

If the problem persists after attempting these solutions, please contact True customer support or a qualified technician.

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

For warranty information or technical support regarding your True 970103 Lae Sn4B40P3-Y T3 4.0M Probe, please refer to the documentation provided with your original equipment or contact True customer service directly. Keep your purchase receipt and model number handy for faster service.

సంప్రదింపు సమాచారం: Please visit the official True Manufacturing website for the most current contact details for customer support and service centers.