పరిచయం
This manual provides instructions for the assembly, operation, and maintenance of your BRIO Double-Column Water Bottle Stand. This stand is designed to efficiently store 3- and 5-gallon water bottles, helping to organize your space.
మూర్తి 1: Fully assembled BRIO Double-Column Water Bottle Stand with 10 water bottles.
సెటప్ మరియు అసెంబ్లీ
The BRIO Double-Column Water Bottle Stand is designed for easy assembly with minimal tools. Please follow these general steps:
- భాగాలను అన్ప్యాక్ చేయండి: Carefully remove all parts from the packaging. Verify that all components are present according to the included parts list (not provided in this manual, refer to product packaging).
- ఫ్రేమ్ని సమీకరించండి: Connect the vertical support beams to the horizontal crossbars. Ensure all connections are secure.
- Install Shelves/Racks: Attach the bottle support racks to the assembled frame. These are designed to cradle 3- and 5-gallon bottles.
- సర్దుబాటు చేయగల పాదాలను అటాచ్ చేయండి: Screw in the adjustable rubber feet to the bottom of the stand's legs. These feet protect flooring and allow for leveling on uneven surfaces.
- ప్లేస్మెంట్: Position the assembled stand on a flat, stable surface. Adjust the rubber feet as needed to ensure the stand is level and stable before loading bottles.
Note: Specific assembly instructions and diagrams are typically included with the product packaging. Refer to those for detailed, step-by-step guidance.
ఆపరేటింగ్ సూచనలు
Using your BRIO Water Bottle Stand is straightforward:
- లోడింగ్ బాటిళ్లు: Gently place 3- or 5-gallon water bottles onto the designated racks. Ensure bottles are securely seated and balanced.
- సామర్థ్యం: This 10-bottle model is designed to hold up to ten 3- or 5-gallon water bottles. Distribute the weight evenly across the stand.
- భద్రత: Always load bottles from the bottom up to maintain stability. Avoid placing bottles in a manner that could cause the stand to become top-heavy or unstable.
నిర్వహణ
To ensure the longevity and appearance of your water bottle stand, follow these maintenance guidelines:
- శుభ్రపరచడం: తయారీదారు సిఫార్సు చేస్తాడు హ్యాండ్ వాష్ for product care. Use a soft cloth with mild soap and water to clean the metal frame. Avoid abrasive cleaners or scouring pads that could damage the finish.
- ఎండబెట్టడం: After cleaning, thoroughly dry all metal components to prevent rust or water spots.
- సాధారణ తనిఖీ: Periodically check all screws and connections to ensure they remain tight. Tighten any loose fasteners as needed.
- ఫుట్ ప్యాడ్లు: Inspect the rubber feet for wear and tear. Replace if damaged to maintain floor protection and stability.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| స్టాండ్ వణుకుతూ లేదా అస్థిరంగా ఉంది. | Uneven floor surface; loose connections; improper bottle placement. | Adjust the rubber feet to level the stand. Tighten all assembly screws. Ensure bottles are evenly distributed and properly seated. |
| అసెంబుల్ చేయడంలో ఇబ్బంది. | Incorrect part orientation; missing tools. | Refer to the detailed assembly instructions provided with the product. Ensure parts are oriented correctly before tightening. |
| Bottles do not fit securely. | Incorrect bottle size; improper placement. | This stand is designed for standard 3- and 5-gallon water bottles. Ensure bottles are placed correctly on the curved supports. |
స్పెసిఫికేషన్లు
- బ్రాండ్: బ్రియో
- మోడల్ సంఖ్య: STM10BTGRY
- రంగు: 10-bottle (Grey)
- శైలి: ఆధునిక
- ముగించు రకం: వినైల్
- బాటిల్ సామర్థ్యం: 10 (3- or 5-gallon bottles)
- అసెంబ్లీ అవసరం: అవును
- ఉత్పత్తి సంరక్షణ సూచనలు: హ్యాండ్ వాష్
- వస్తువు బరువు: 19.31 పౌండ్లు
- ప్యాకేజీ కొలతలు: 55 x 15.5 x 4 అంగుళాలు
- UPC: 841545164907
వారంటీ మరియు మద్దతు
Specific warranty information for the BRIO Double-Column Water Bottle Stand is not provided in this manual. Please refer to the product packaging or contact Brio customer service for details regarding warranty coverage and support options.
For additional assistance or inquiries, please visit the official Brio webసైట్ లేదా వారి కస్టమర్ సపోర్ట్ విభాగాన్ని సంప్రదించండి.
