KeylessOption EZSDEI7141 474V

KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Model: EZSDEI7141 474V

పరిచయం

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

ముందు view of the KeylessOption Key Fob with lock, unlock, AUX, and star buttons.

చిత్రం: ముందు భాగం view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

సెటప్ మరియు ప్రోగ్రామింగ్

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

ప్రోగ్రామింగ్ దశలు:

  1. Open the driver's side door of your vehicle.
  2. ఇగ్నిషన్‌లోకి కీని చొప్పించి, దానిని ON position. Do not start the engine.
  3. Locate the Viper system's control button (often a small button with a blue LED indicator).
  4. నియంత్రణ బటన్‌ను నొక్కండి ఏడు సార్లు. న eighth press, hold the button down until the car chirps.
  5. While still holding the control button, press the తాళం వేయండి button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
  6. నియంత్రణ బటన్ను విడుదల చేయండి.
  7. జ్వలన కీని తిరగండి ఆఫ్ స్థానం మరియు దానిని తీసివేయండి.
  8. Close the driver's side door.
  9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

వీడియో: ఒక చిన్న వివరణview of KeylessOption Key Fob Remotes for Viper systems.

ఆపరేటింగ్ సూచనలు

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

కోణీయ view of the KeylessOption Key Fob, showing the side profile and button layout.

చిత్రం: కోణీయ view of the KeylessOption Key Fob, highlighting its ergonomic design.

నిర్వహణ

బ్యాటరీ భర్తీ:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

  1. Carefully separate the two halves of the remote casinచిన్న ఫ్లాట్-హెడ్ స్క్రూడ్రైవర్ లేదా ప్రియింగ్ టూల్ ఉపయోగించి గ్రా.
  2. Remove the old battery. Note its orientation (+/- sides).
  3. Insert the new battery with the correct orientation.
  4. రిమోట్ c ని స్నాప్ చేయండిasing సురక్షితంగా తిరిగి కలపండి.
వెనుకకు view of the KeylessOption Key Fob, showing the smooth casing.

చిత్రం: వెనుకకు view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

బ్రాండ్కీలెస్ ఎంపిక
మోడల్ సంఖ్యEZSDEI7141 474V
అనుకూల పరికరాలుViper Aftermarket Alarm System
FCC IDEZSDEI7141
బటన్ల సంఖ్య4 (Lock, Unlock, Aux, Panic)
వస్తువు బరువు0.634 ఔన్సులు
ప్యాకేజీ కొలతలు6.77 x 4.65 x 0.47 అంగుళాలు

వారంటీ మరియు మద్దతు

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webసైట్.

కీలెస్ ఆప్షన్ వారంటీ కార్డ్

Image: KeylessOption Warranty Card, included with each purchase.

సంబంధిత పత్రాలు - EZSDEI7141 474V

ముందుగాview Directed 474T 1-Way 4-Button Remote Control
Replacement 1-Way 4-Button Remote Control for Directed systems and compatible Avital, Clifford, and other brands. Features include CR2032 battery, 434Mhz frequency, and 1/4-mile range.
ముందుగాview Remote Control Compatibility and Replacement Guide
A comprehensive reference guide detailing remote control models, part numbers, date codes, and compatible replacement remotes across various brands including Automate, Clifford, Viper, and many others. Includes a section for FCC ID cross-referencing.