1. పరిచయం
This manual provides detailed instructions for the installation, operation, and maintenance of the Carel PZGXS0J111 Refrigeration Cooler Control Temperature Controller. This device is designed for precise temperature management in refrigeration systems, display cabinets, and showcases. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.
మూర్తి 1: ముందు view of the Carel PZGXS0J111 controller, showing the digital display and control buttons.
2. భద్రతా సమాచారం
Adherence to safety standards is crucial for the proper functioning and longevity of the device, as well as for user safety. This controller complies with relevant European standards.
- కనెక్షన్ కేబుల్స్: Ensure connection cables guarantee insulation up to 90°C.
- 12 Vac Versions: For 12 Vac versions, use Class II transformers. To comply with immunity standards, the transformer must be a specified CAREL model. Double insulation cannot be guaranteed between power supply and relay outputs for 12 Vac/dc versions; use only safety low voltage loads (up to 42 V effective rated value).
- ఇన్స్టాలేషన్ క్లియరెన్స్: Maintain a space of at least 10 mm between the case and nearby conductive parts.
- Digital and Analog Input Connections: For connections less than 30 m away, adopt suitable measures for separating cables to ensure compliance with immunity standards.
- Output Cable Security: Secure the connection cables of the outputs to avoid contact with very low voltagఇ భాగాలు.
Figure 2: Excerpt from the safety standards document, detailing insulation, transformer, and installation clearance requirements.
3. సాంకేతిక లక్షణాలు
The Carel PZGXS0J111 is a robust electronic microprocessor controller designed for various refrigeration applications. Below are its key technical specifications:
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| విద్యుత్ సరఫరా | 115 Vac +10/-15% 50/60 Hz |
| రేట్ చేయబడిన శక్తి | 3 VA |
| ఇన్పుట్లు | NTC or PTC probes (1 or 3 inputs), Digital input as alternative to third probe |
| రిలే అవుట్పుట్లు | 2 HP relay: UL 12 A Res. 12 FLA 72 LRA - 240 Vac; 16 A relay: UL 8 A Res. 10 FLA 60 LRA - 240 Vac |
| ప్రోబ్ రకం | Std CAREL NTC 10 kΩ at 25°C, Std CAREL PTC 990 Ω at 25°C |
| కనెక్షన్లు | Screw terminals for cables with cross-sect. from 0.5 mm² to 1.5 mm². Plug-in terminals for screw blocks or with crimped contact (cable cross-sect. up to 2.5 mm²). Rated maximum current per terminal 12 A. |
| అసెంబ్లీ | Terminal: using screws from the front panel or with rear brackets. Interface: with mounting, 4 screws, spacing 101x151 mm. |
| ప్రదర్శించు | 3 digit LED display with sign (-999 to 999) and decimal point, six status LEDs |
| ఆపరేటింగ్ పరిస్థితులు | -10T50 °C - humidity <90% RH non-condensing |
| నిల్వ పరిస్థితులు | -20T70 °C - humidity <90% RH non-condensing |
| కొలత పరిధి | -50T90 °C (-58T194 °F) - resolution 0.1 °C/°F |
| Front Panel Index of Protection | Panel installation with IP65 type 1 gasket |
| కేసు | Plastic terminal, H76xL36xW65 mm |
| సర్టిఫికేషన్ | NSF, cURus, EAC CE |
| వాల్యూమ్tage | 115 వోల్ట్లు |
| రంగు | నలుపు |
| UPC | 661020725184 |
Figure 3: Detailed technical specifications, including power supply, inputs, outputs, and environmental conditions.
4. సంస్థాపన మరియు వైరింగ్
Proper installation is critical for the controller's performance and safety. Refer to the wiring diagrams and ensure all connections are secure and comply with local electrical codes.
4.1 వైరింగ్ రేఖాచిత్రం
The controller features screw terminals for secure wiring. Ensure to use copper conductors only, as indicated on the device label.
చిత్రం 4: వెనుక view of the controller displaying the terminal block layout and electrical specifications. Note the "Use copper conductors only" instruction.
Figure 5: Close-up of the wiring terminals, indicating connections for power (115V~), probes (NTC, AMB.T, DEF.T), and digital inputs (DI/NTC).
4.2 టెర్మినల్ కనెక్షన్లు
- Terminals 1-3: AUX and L (Line) connections.
- Terminals 4-5: L (Line) and N (Neutral) for 115V~ power supply.
- Terminals 6-7: AMB.T (Ambient Temperature) probe.
- Terminals 8-9: NTC (Negative Temperature Coefficient) probes.
- Terminals 10-11: DEF.T (Defrost Temperature) probe and DI/NTC (Digital Input/NTC) connections.
Ensure proper polarity and secure connections for all wires. The terminal blocks are designed for easy and reliable wiring.
మూర్తి 6: వివరంగా view of the green screw terminal blocks, highlighting the robust connection points.
4.3 మౌంటు
The controller is designed for panel installation. It uses 4 screws for mounting with a spacing of 101x151 mm. Ensure the panel opening is correctly sized for a snug fit and IP65 protection.
Figure 7: Yellow push clips, likely used for securing the controller during panel mounting or for cable management.
5. ఆపరేషన్
The Carel PZGXS0J111 features an intuitive interface with a 3-digit LED display and several buttons for control and configuration.
5.1 Display and Functions
The display shows the value of the probe set using parameter P1. An ambient probe, defrost probe, and third probe are available. LEDs indicate the activation of control functions.
| LED ఐకాన్ | ఫంక్షన్ | సాధారణ ఆపరేషన్ | బ్లింక్ | ప్రారంభించండి |
|---|---|---|---|---|
| ❄️ | కంప్రెసర్ | on | అభ్యర్థన | ON |
| 💨 💨 💨 | అభిమాని | on | అభ్యర్థన | ON |
| 💧 | కరిగించే | on | అభ్యర్థన | ON |
| AUX | అవుట్పుట్ ఆన్ చేయబడింది | అవుట్పుట్ ఆఫ్ | - | ON |
| 🔔 | అలారం | అలారం లేదు | - | ON |
| 🕒 | గడియారం | RTC fitted or disabled, at least 1 time band set | RTC not fitted or disabled, not even 1 time band set | RTC అమర్చినట్లయితే ఆన్ |
5.2 Button Functions (Models S, X, Y, C)
| బటన్ | సాధారణ ఆపరేషన్ | ప్రారంభించండి |
|---|---|---|
| సెట్ | Pressing the button alone: display set point. More than 3 s: display parameter setting menu. | Pressed together: Set point display. |
| యుపి (▲) | విలువను పెంచండి. | - |
| డౌన్ (▼) | విలువను తగ్గించండి. | - |
| ON/OFF (⏻) | More than 3 s: start/stop ON/OFF. | - |
| DEFROST (❄️💧) | More than 3 s: start defrost. | - |
| MUTE (🔔) | Mute alarm. | - |
5.3 Setting the Set Point (Desired Temperature)
- నొక్కండి సెట్ for 1 s; the set value will start flashing after a few moments.
- Increase or decrease the value using UP (▲) లేదా డౌన్ (▼).
- నొక్కండి సెట్ కొత్త విలువను నిర్ధారించడానికి.
5.4 Switching the Device ON/OFF
నొక్కండి ON/OFF (⏻) for more than 3 s. The control and defrost algorithms are now disabled and the instrument displays the message "OFF" alternating with the temperature read by the set probe.
5.5 Manual Defrost (Models S, X, Y and C only)
నొక్కండి DEFROST (❄️💧) for more than 3 s (the defrost starts only if the temperature conditions are valid).
Figure 8: Tables detailing LED indicators, button functions, and basic operation procedures.
6. నిర్వహణ
Regular maintenance ensures the optimal performance and longevity of your Carel PZGXS0J111 controller.
6.1 శుభ్రపరచడం
To clean the instrument, use only neutral detergents and water. Avoid abrasive cleaners or solvents that could damage the casing లేదా డిస్ప్లే.
6.2 Probe and Cable Inspection
Periodically inspect probes and cables for any signs of wear, damage, or loose connections. Ensure probes are correctly positioned for accurate temperature readings. The maximum cable length for probes is 10 meters.
7. ట్రబుల్షూటింగ్
This section provides guidance for common issues you might encounter with the Carel PZGXS0J111 controller. For complex problems, consult a qualified technician.
- Display shows "OFF": This indicates the device is switched off. Press and hold the ON/OFF button for more than 3 seconds to turn it back on.
- తప్పు ఉష్ణోగ్రత రీడింగ్: Check probe connections and ensure probes are not damaged or improperly installed. Verify the probe type setting in the controller's parameters.
- కంట్రోలర్ స్పందించడం లేదు: Check the power supply (115V AC). Ensure all wiring connections are secure. If the issue persists, a reset might be necessary (refer to advanced settings in the full manual, if available).
- Alarm Indicator On: Check the alarm conditions. Press the MUTE button to silence the alarm. Address the underlying cause of the alarm (e.g., temperature out of range).
8. వారంటీ సమాచారం
For warranty details, please refer to the official Carel product warranty statement provided with your purchase or visit the Carel official website. Typically, warranty covers manufacturing defects under normal operating conditions.
- రక్షణ ప్రణాళికలు: అదనపు రక్షణ ప్రణాళికలు కొనుగోలుకు అందుబాటులో ఉండవచ్చు, ప్రామాణిక తయారీదారు వారంటీకి మించి పొడిగించిన కవరేజీని అందిస్తాయి. ఉదా.ampవాటిలో 3 సంవత్సరాల మరియు 4 సంవత్సరాల రక్షణ ప్రణాళికలు ఉన్నాయి.
9. కస్టమర్ మద్దతు
For technical assistance, spare parts, or further inquiries regarding your Carel PZGXS0J111 controller, please contact Carel customer support or your authorized distributor.
తయారీదారు: కారెల్
Webసైట్: www.carel.com (Please note: This is a generic link. Refer to your product packaging or official documentation for specific support contacts.)
