పరిచయం
OSD MX880 GEN2 అనేది అధిక-పనితీరు గల, బహుళ-ఛానల్ క్లాస్ D. amplifier designed to deliver reliable power for distributed audio systems in both residential and commercial environments. This amplifier provides 8 channels of amplification, configurable into 4 zones, offering flexible audio distribution solutions. Its efficient Class D design ensures low distortion and high power output while maintaining a compact form factor.

చిత్రం 1: ముందు మరియు వెనుక view of the OSD MX880 GEN2 Multi-Zone Ampలైఫైయర్, షోక్asing its compact design and comprehensive connectivity options.
భద్రతా సమాచారం
Please read and understand all safety instructions before operating this ampలైఫైయర్. భవిష్యత్తు సూచన కోసం ఈ మాన్యువల్ని ఉంచండి.
- శక్తి మూలం: కనెక్ట్ చేయండి amplifier only to the type of power source indicated on the marking label.
- వెంటిలేషన్: సరైన వెంటిలేషన్ ఉండేలా చూసుకోండి. వెంటిలేషన్ ఓపెనింగ్లను బ్లాక్ చేయవద్దు. తయారీదారు సూచనలకు అనుగుణంగా ఇన్స్టాల్ చేయండి.
- నీరు మరియు తేమ: ఈ ఉపకరణాన్ని వర్షం లేదా తేమకు గురిచేయవద్దు. కుండీల వంటి ద్రవాలతో నిండిన వస్తువులను ఉపకరణంపై ఉంచవద్దు.
- వేడి: రేడియేటర్లు, హీట్ రిజిస్టర్లు, స్టవ్లు లేదా ఇతర ఉపకరణాలు (సహా ampలిఫైయర్లు) వేడిని ఉత్పత్తి చేస్తాయి.
- గ్రౌండింగ్: ఈ ఉపకరణం తప్పనిసరిగా గ్రౌన్దేడ్ చేయబడాలి.
- సర్వీసింగ్: ఈ ఉత్పత్తిని మీరే సేవ చేయడానికి ప్రయత్నించవద్దు. అర్హత కలిగిన సేవా సిబ్బందికి అన్ని సర్వీసులను చూడండి.
కీ ఫీచర్లు
- అధిక-పనితీరు Ampలిఫికేషన్: Delivers 80 Watts per channel (1KHz into 4 Ohms) and 50 Watts per channel (1KHz into 8 Ohms) for high-resolution audio.
- Class D Efficiency: Utilizes Class D amplifier technology for low distortion, high efficiency, and reduced heat generation.
- బహుళ-జోన్ సామర్థ్యం: Supports up to four independent audio zones, ideal for distributed audio systems.
- ఫ్లెక్సిబుల్ కాన్ఫిగరేషన్: Can be used as a main amplifier for audio distribution or integrated into 5.1 or 7.2 home theater systems.
- రక్షణ వలయం: Features special protection circuitry to safeguard against thermal overload and short circuits.
- ముందు ప్యానెల్ నియంత్రణలు: Direct On/Off zone control buttons on the front panel for convenient operation.
- కాంపాక్ట్ డిజైన్: Slim 2U rack-mountable form factor (hardware included) for easy integration into AV racks.
ప్యాకేజీ విషయాలు
ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని నిర్ధారించుకోండి:
- OSD MX880 GEN2 మల్టీ-జోన్ Ampజీవితకాలం
- పవర్ కార్డ్
- Rack Mount Hardware
- త్వరిత ప్రారంభ గైడ్
సెటప్
1. Physical Placement and Rack Mounting
ఉంచండి amplifier in a location with adequate ventilation. If rack mounting, use the included hardware to secure the amplifier in a standard 19-inch audio rack. Ensure there is sufficient space around the unit for airflow to prevent overheating.
2 స్పీకర్ కనెక్షన్లు
The MX880 GEN2 features phoenix connectors for speaker outputs. Each zone has dedicated left and right speaker terminals. Ensure correct polarity (+ to + and – to –) when connecting speakers. The amplifier supports both 4-ohm and 8-ohm speakers.

మూర్తి 2: వివరంగా view of Zone 2 connections on the rear panel, including Line In/Out, Trigger, Bus In, Volume controls, Stereo/Bridge switch, and speaker terminals.

మూర్తి 3: వివరంగా view of the Bus inputs and Zone 4 connections on the rear panel, illustrating the flexibility for system integration.
3 ఆడియో ఇన్పుట్ కనెక్షన్లు
Connect your audio sources (e.g., pre-amplifier, media player) to the amplifier's inputs. The MX880 GEN2 offers multiple input options:
- లైన్ ఇన్ (RCA): Each zone has a dedicated stereo RCA input.
- Bus In (RCA): Two global stereo RCA bus inputs (Bus In 1, Bus In 2) allow a single source to be distributed to multiple zones.
- ఇన్పుట్ ఎంపిక స్విచ్: Each zone has a switch to select between its dedicated Line In, Bus In 1, or Bus In 2.
4. Trigger Connections (Optional)
ది amplifier includes 12V trigger inputs and outputs for integration with other audio components. Connect a 12V trigger source to the 'Trigger In' to automatically power on/off the amplifier. Use 'Trigger Out' to control other devices.
5. పవర్ కనెక్షన్
Once all audio and speaker connections are made, connect the supplied power cord to the amplifier's AC inlet and then to a suitable power outlet. Ensure the voltage selector switch (if present) is set correctly for your region (AC 115V or AC 230V).
ఆపరేటింగ్ సూచనలు
1. పవర్ చేయడం ఆన్/ఆఫ్
Press the main power button on the front panel to turn the amplifier on or off. The power indicator LED will illuminate when the unit is powered on.
2. Zone Control
Each of the four zones has a dedicated On/Off button on the front panel. Press the corresponding button to activate or deactivate a zone. The zone indicator LED will light up when the zone is active.
3. వాల్యూమ్ సర్దుబాటు
Each zone has individual volume adjustment controls located on the rear panel. Use a small screwdriver to adjust the 'Vol.Right' and 'Vol.Left' potentiometers for each zone to set the desired maximum volume level. Fine-tune volume from your audio source.
4. ఇన్పుట్ సోర్స్ ఎంపిక
On the rear panel, next to the RCA inputs for each zone, there is a slide switch to select the audio input source for that specific zone: 'Line In', 'Bus In 1', or 'Bus In 2'.
5. Stereo/Bridge Mode
Each zone can operate in stereo or bridged mono mode. The 'Stereo/Bridge' switch on the rear panel allows you to select the mode. In bridged mode, the two channels of a zone combine to provide higher power output to a single speaker (typically 8-ohm). Ensure correct speaker wiring when using bridged mode.
వీడియో 1: ఒక ఓవర్view of OSD Audio's Multi-Channel Amplifiers, including the MX series, highlighting their features and applications in distributed audio systems.
నిర్వహణ
- శుభ్రపరచడం: వెలుపలి భాగాన్ని శుభ్రం చేయడానికి మృదువైన, పొడి వస్త్రాన్ని ఉపయోగించండి ampలిఫైయర్. లిక్విడ్ క్లీనర్లు లేదా ఏరోసోల్ స్ప్రేలను ఉపయోగించవద్దు.
- వెంటిలేషన్: Regularly check that the ventilation openings are clear of dust and debris to ensure proper airflow and prevent overheating.
- పవర్ కార్డ్: Inspect the power cord periodically for any damage. If damaged, replace it with an appropriate cord.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| శక్తి లేదు | విద్యుత్ తీగ తెగిపోయింది; విద్యుత్ అవుట్లెట్ లోపించింది; Ampలైఫైయర్ రక్షణ మోడ్ సక్రియం చేయబడింది. | Check power cord connection; Test power outlet; Disconnect power for 5 minutes and reconnect. |
| No sound from a zone | Zone not activated; Incorrect input selected; Speaker wires disconnected/faulty; Source device not playing. | Press zone On/Off button; Verify input selection switch; Check speaker connections; Ensure audio source is active. |
| వక్రీకరించిన ధ్వని | Volume too high (source or amplifier); Incorrect speaker impedance; Faulty cables. | Reduce volume levels; Ensure speakers match amplifier impedance (4 or 8 ohms); Check and replace cables if necessary. |
| హమ్మింగ్ లేదా బజ్జింగ్ శబ్దం | Ground loop; Loose connections; Interference from other electronics. | Ensure all components are on the same electrical circuit; Check all audio cable connections; Move ampలైఫైయర్ను ఇతర ఎలక్ట్రానిక్ పరికరాలకు దూరంగా ఉంచండి. |
| Amplifier overheats and shuts down | Insufficient ventilation; Overloaded speakers (too low impedance); Short circuit in speaker wiring. | Ensure clear ventilation; Check speaker impedance; Inspect speaker wiring for shorts. Allow unit to cool before restarting. |
స్పెసిఫికేషన్లు
| స్పెసిఫికేషన్ | వివరాలు |
|---|---|
| మోడల్ సంఖ్య | MX880 GEN2 |
| బ్రాండ్ | OSD ఆడియో |
| ఛానెల్ల సంఖ్య | 8 (4 stereo zones) |
| Output Power (1KHz, 4 Ohms) | ఒక్కో ఛానెల్కు 80 వాట్స్ |
| Output Power (1KHz, 8 Ohms) | ఒక్కో ఛానెల్కు 50 వాట్స్ |
| Ampజీవిత రకం | క్లాస్ డి |
| అంశం కొలతలు (L x W x H) | 16.81 x 16.41 x 3.46 అంగుళాలు |
| వస్తువు బరువు | 19 పౌండ్లు |
| వాల్యూమ్tage | 12 Volts (DC Trigger) |
| మౌంటు రకం | ర్యాక్ మౌంట్ |
| UPC | 810281011264 |
వారంటీ
OSD Audio products are designed and manufactured to the highest quality standards. For specific warranty details and terms, please refer to the warranty information provided with your purchase or visit the official OSD Audio webసైట్. ఏవైనా వారంటీ క్లెయిమ్ల కోసం మీ కొనుగోలు రుజువును ఉంచుకోండి.
మద్దతు
If you encounter any issues or have questions regarding your OSD MX880 GEN2 Multi-Zone Amplifier that are not covered in this manual, please contact OSD Audio customer support. You can find contact information on the official OSD Audio webసైట్ లేదా మీ రిటైలర్ ద్వారా.
అదనపు వనరులు మరియు ఉత్పత్తి సమాచారం కోసం, సందర్శించండి అమెజాన్లో OSD ఆడియో స్టోర్.





