Hormann FCT3-1 BS Wireless Code Switch Instruction Manual

1. పరిచయం

This manual provides essential instructions for the installation, operation, and maintenance of your Hormann FCT3-1 BS Wireless Code Switch. This device is designed to control up to three compatible Hormann gate operators using a secure, programmable code. Please read these instructions carefully before use to ensure safe and efficient operation.

2. భద్రతా సూచనలు

Observe the following safety guidelines to prevent injury or damage to the device:

• పరికరాన్ని పిల్లలకు అందుబాటులో లేకుండా ఉంచండి.
• Do not expose the device to extreme temperatures, direct sunlight, or moisture beyond its specified IP44 rating.
• Only use the specified battery type (2 x 1.5V LR03/AAA). Ensure correct polarity during installation.
• పరికరాన్ని మీరే తెరవడానికి లేదా మరమ్మతు చేయడానికి ప్రయత్నించవద్దు. అన్ని సర్వీసింగ్‌లను అర్హత కలిగిన సిబ్బందికి సూచించండి.
• Ensure the mounting location is secure and stable to prevent the device from falling.
• Always test the functionality of the gate operator after programming the code switch to ensure safe operation.

3. ప్యాకేజీ విషయాలు

ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని నిర్ధారించుకోండి:

• 1 x Hormann FCT3-1 BS Wireless Code Switch
• 2 x 1.5V LR03/AAA Batteries
• సూచనల మాన్యువల్ (ఈ పత్రం)

4. సాంకేతిక లక్షణాలు

5. సెటప్ మరియు ఇన్‌స్టాలేషన్

5.1 బ్యాటరీ ఇన్‌స్టాలేషన్

1. Carefully open the battery compartment cover on the back of the code switch.
2. Insert the two 1.5V LR03/AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
3. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను సురక్షితంగా మూసివేయండి.

5.2 Mounting the Code Switch

The FCT3-1 BS is designed for surface mounting. Choose a location that is easily accessible, protected from direct heavy rain (though IP44 rated), and within effective range of your gate operator.

1. Mark the desired mounting position on the wall or surface.
2. Drill appropriate holes for the mounting screws (screws and wall plugs are typically not included and should be selected based on the mounting surface).
3. Secure the code switch to the surface using the appropriate fasteners.

మూర్తి 1: Hormann FCT3-1 BS Wireless Code Switch. This image shows the Hormann FCT3-1 BS Wireless Code Switch. It features a square, light grey housing with a circular keypad in the center. The keypad includes numerical buttons from 0 to 9, a light/bell symbol button, and a key symbol button. The 'Hormann' logo is visible at the bottom of the device.

5.3 Programming with Gate Operator

The FCT3-1 BS must be programmed to your specific Hormann gate operator(s). The exact programming procedure varies depending on your gate operator model. Refer to the instruction manual of your Hormann gate operator for detailed steps on how to pair a new wireless code switch. Generally, this involves:

• Activating the programming mode on your gate operator.
• Entering a desired code on the FCT3-1 BS keypad.
• Confirming the code and transmitting the signal to the operator.
• Testing the functionality.

The FCT3-1 BS supports controlling up to three different gate operators or functions. Each operator/function will require its own unique code and programming sequence.

6. Operating the Code Switch

6.1 Entering a Code

To operate a programmed gate operator:

1. Press the numerical keys to enter your pre-programmed code.
2. After entering the full code, press the key symbol button (bottom right) to transmit the signal.
3. The gate operator should respond according to its programming (e.g., open, close, stop).

6.2 Keypad Illumination

The keypad features illumination for use in low-light conditions. The illumination activates automatically upon pressing any key. It will remain lit for a short period after the last key press.

ది light/bell symbol button (bottom left) can be used to activate the illumination without sending a command, or if programmed, to trigger a specific function on your gate operator (e.g., turn on an external light, ring a bell, if supported by your operator).

7. నిర్వహణ

7.1 బ్యాటరీ భర్తీ

When the batteries are low, the keypad illumination may dim or the transmission range may decrease. Replace the batteries as follows:

1. పరికరం వెనుక భాగంలో బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను తెరవండి.
2. Remove the old 1.5V LR03/AAA batteries.
3. Insert new 1.5V LR03/AAA batteries, observing correct polarity.
4. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను సురక్షితంగా మూసివేయండి.

గమనిక: స్థానిక నిబంధనల ప్రకారం ఉపయోగించిన బ్యాటరీలను పారవేయండి.

7.2 శుభ్రపరచడం

Clean the surface of the code switch with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the housing finish.

7.3 తనిఖీ

Periodically inspect the device for any signs of damage, such as cracks in the housing or loose mounting. Ensure the keypad buttons function correctly.

8. ట్రబుల్షూటింగ్

9. Compatible Gate Operators

The Hormann FCT3-1 BS Wireless Code Switch is compatible with the following Hormann gate operator models and series:

• SupraMatic E/P
• సుప్రమాటిక్ HT
• ProMatic
• ProMatic Battery
• రోల్‌మాటిక్
• RotaMatic / P / PL
• RotaMatic Solar Battery
• VersaMatic / P
• VersaMatic Solar Battery
• LineaMatic / P
• లైన్‌మాటిక్

Additionally, due to its Bi-Secur technology, it is backward compatible with Hormann drives from Series 1 and 2 (868 MHz).