1. పరిచయం
This manual provides essential information for the proper installation, operation, and maintenance of the Swagelok Alloy C-276 Plug, model HC-810-P. This plug is designed for 1/2" tube outside diameter (OD) compression applications, offering a reliable seal in various industrial environments. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
2. భద్రతా సమాచారం
Always adhere to standard safety practices when handling and installing industrial components. Failure to follow these guidelines may result in injury, property damage, or product malfunction.
- సంస్థాపన లేదా నిర్వహణకు ముందు వ్యవస్థ ఒత్తిడి తగ్గించబడి, నీరు ఖాళీ చేయబడిందని నిర్ధారించుకోండి.
- భద్రతా గ్లాసెస్ మరియు చేతి తొడుగులు సహా తగిన వ్యక్తిగత రక్షణ పరికరాలు (PPE) ధరించండి.
- Do not overtighten or undertighten fittings. Refer to installation instructions for proper torque specifications.
- Verify material compatibility with the system fluid and operating conditions.
- Keep the product clean and free from contaminants.
3. ఉత్పత్తి ముగిసిందిview మరియు భాగాలు
The Swagelok Alloy C-276 Plug is a robust fitting designed to seal off the end of a 1/2" OD tube line. It consists of a main body with a hexagonal shape for wrenching, and an internal compression mechanism.
Image showing the Swagelok Alloy C-276 Plug, a metallic component with a hexagonal body and threaded interior, designed for tube compression applications. The Swagelok brand name is visible on one side.
కీలక భాగాలు:
- Plug Body: The main hexagonal component that houses the sealing mechanism.
- గింజ: (Not explicitly shown as separate, but implied in compression fittings) Secures the plug to the tube fitting.
- ఫెర్రూల్స్: (Not explicitly shown as separate, but implied in compression fittings) Front and back ferrules create the seal and grip on the tube.
4. సెటప్ మరియు ఇన్స్టాలేషన్
Proper installation is crucial for leak-tight performance. Follow these steps carefully:
- Prepare the Tube: Ensure the 1/2" OD tube end is cut squarely, deburred, and free of scratches or defects.
- ప్లగ్ని చొప్పించండి: Insert the plug into the Swagelok tube fitting body until it bottoms out.
- Finger Tighten: Finger tighten the nut onto the fitting body.
- Wrench Tighten: Mark the nut at the 6 o'clock position. Tighten the nut 1/4 turn with a wrench. For larger sizes (1" and above), 1/4 turn plus 1/8 turn may be required. Consult Swagelok's official installation guides for precise torque specifications if available for this specific plug type.
- తనిఖీ: Visually inspect the connection to ensure the nut is properly seated and the plug is secure.
గమనిక: For critical applications or if unsure, always refer to official Swagelok installation procedures and training resources.
5. ఆపరేటింగ్ సూత్రాలు
The Swagelok Alloy C-276 Plug functions by creating a mechanical seal against the internal components of a Swagelok tube fitting. When the nut is tightened, the ferrules are driven forward, with the front ferrule creating a primary seal on the fitting body and the back ferrule providing a secondary seal and gripping the tube (or in this case, the plug itself) securely. The Alloy C-276 material provides excellent corrosion resistance in harsh environments.
6. నిర్వహణ
The Swagelok Alloy C-276 Plug is designed for long-term, reliable service with minimal maintenance. However, periodic inspection is recommended.
- దృశ్య తనిఖీ: Regularly check for any signs of corrosion, damage, or leaks around the fitting.
- శుభ్రపరచడం: If necessary, clean the exterior of the plug with a mild detergent and water. Avoid abrasive cleaners.
- Re-tightening: If a leak is detected, a slight re-tightening (1/8 turn) may resolve it. Do not overtighten. If the leak persists, the fitting may need to be disassembled, inspected, and potentially replaced.
- భర్తీ: If the plug or associated fitting components show significant wear, damage, or cannot maintain a seal, replace them with genuine Swagelok parts.
7. ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Leak at the fitting connection | Insufficient tightening, damaged ferrules, improper tube preparation, or contaminated components. | Slightly re-tighten the nut (1/8 turn). If leak persists, depressurize, disassemble, inspect components for damage, clean, re-cut tube if necessary, and reassemble. Replace damaged parts. |
| Difficulty tightening the nut | Cross-threading, damaged threads, or incorrect component alignment. | Ensure proper alignment before tightening. Do not force. Inspect threads for damage. Replace if threads are stripped or damaged. |
| Corrosion on plug surface | Exposure to incompatible chemicals or harsh environmental conditions beyond material limits. | Verify material compatibility for the application. Clean regularly. If corrosion is severe, replace the plug. |
8. స్పెసిఫికేషన్లు
| గుణం | విలువ |
|---|---|
| మోడల్ సంఖ్య | HC-810-P |
| బ్రాండ్ | స్వాగెలోక్ |
| మెటీరియల్ | Alloy C-276 (Hastelloy) |
| Tube OD Compatibility | 1/2 అంగుళం |
| కనెక్టర్ రకం | ప్లగ్ |
| వస్తువు బరువు | 1 పౌండ్లు |
| తయారీదారు | స్వాగెలోక్ |
| ASIN | B0859NC3RY |
| మొదట అందుబాటులో ఉన్న తేదీ | ఫిబ్రవరి 28, 2020 |
9. వారంటీ మరియు మద్దతు
For information regarding product warranty, technical support, or to locate an authorized distributor, please visit the official Swagelok webసైట్ చేయండి లేదా వారి కస్టమర్ సేవను సంప్రదించండి. మీరు కొనుగోలు చేశారని ఎల్లప్పుడూ నిర్ధారించుకోండిasing genuine Swagelok products for optimal performance and safety.
Official Swagelok Webసైట్: www.swagelok.com
