Fenix BC30 v2.0 Bicycle Light

1. ఉత్పత్తి ముగిసిందిview

The Fenix BC30 v2.0 is a high-performance bicycle light designed for optimal visibility and safety during cycling. It features a powerful 2200 lumen dual beam system, a wireless remote control for easy operation, and robust construction for durability in various conditions. This manual provides detailed instructions for the proper setup, operation, and maintenance of your BC30 v2.0 bicycle light.

Image: Fenix BC30 v2.0 Bicycle Light, including the light unit, wireless remote, and a LumenTac battery organizer.

2. ప్యాకేజీ విషయాలు

• Fenix BC30 v2.0 Bicycle Light
• వైర్లెస్ రిమోట్ కంట్రోల్
• Quick Adjust Bike Mount
• LumenTac బ్యాటరీ ఆర్గనైజర్
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)
• Note: Batteries are not included and must be purchased separately. The BC30 v2.0 requires two 18650 rechargeable Li-ion batteries.

Image: The included LumenTac battery organizer, designed for storing 18650 batteries.

3. సెటప్

3.1 బ్యాటరీ ఇన్‌స్టాలేషన్

1. Unscrew the tail cap of the BC30 v2.0 light unit.
2. Insert two 18650 rechargeable Li-ion batteries into the battery compartment, ensuring correct polarity (+/-).
3. టెయిల్ క్యాప్‌ను తిరిగి సురక్షితంగా స్క్రూ చేయండి.

3.2 Mounting the Bicycle Light

1. Attach the quick adjust bike mount to your bicycle's handlebar. Ensure it is positioned centrally and securely tightened.
2. Slide the BC30 v2.0 light unit onto the mount until it clicks into place.
3. Adjust the angle of the light to ensure optimal illumination of the path ahead.

Image: The Fenix BC30 v2.0 bicycle light securely mounted on a handlebar, ready for use.

3.3 Installing the Wireless Remote Control

1. Attach the wireless remote control to a convenient location on your handlebar using the integrated strap.
2. Ensure the remote is within easy reach of your thumb or finger for quick access during cycling.

Image: The wireless remote control attached to bicycle handlebars, illustrating its accessible placement.

4. ఆపరేటింగ్ సూచనలు

4.1 పవర్ ఆన్/ఆఫ్

• To power on: Press and hold the main switch on the light unit for 0.5 seconds.
• To power off: Press and hold the main switch on the light unit for 0.5 seconds.

4.2 Brightness Level Selection

• With the light on, single click the main switch on the light unit or the output selection switch on the wireless remote to cycle through brightness levels: Eco/EDC → Low → Med → High.
• To activate Burst mode (2200 lumens): Single click the Burst switch on the wireless remote. The Burst mode will last up to 30 seconds.
• To activate Flash mode: Press and hold the output selection switch on the wireless remote for 0.5 seconds. Single click to return to the previously used constant output mode.

4.3 Dual Distance Beam System

The BC30 v2.0 features a unique Dual Distance Beam System with patented optical lens. This system uses upward beam reflection to provide auxiliary illumination immediately in front of the bicycle, ensuring comprehensive coverage both near and far.

Image: Illustration of the Fenix BC30 v2.0's Dual Distance Beam System, showing both long-range and short-distance illumination.

4.4 బ్యాటరీ స్థాయి సూచిక

The remaining battery level is indicated by the color of the main switch on the light unit when the light is switched off. Single click the functional switch to check the battery status. The battery status percentage will be displayed, and then goes out in 3 seconds.

• గ్రీన్ లైట్ స్థిరంగా ఆన్: 100% - 80%
• Orange light constant on: 80% - 40%
• ఎరుపు కాంతి స్థిరంగా ఉంటుంది: 40% - 10%
• ఎరుపు కాంతి వెలుగులు: 10% - 0%

Image: Visual representation of the Fenix BC30 v2.0's battery level indicator, showing green, orange, and red light states.

5. నిర్వహణ

5.1 శుభ్రపరచడం

Regularly clean the light body with a soft cloth. For stubborn dirt, use a damp cloth with mild soap. Avoid using abrasive cleaners or solvents that could damage the finish or internal components.

5.2 బ్యాటరీ సంరక్షణ

• Always use high-quality 18650 rechargeable Li-ion batteries.
• Remove batteries if the light will not be used for an extended period to prevent leakage.
• చల్లని, పొడి ప్రదేశంలో బ్యాటరీలను నిల్వ చేయండి.
• Ensure batteries are fully charged before long rides to maximize runtime.

5.3 నీటి నిరోధకత

The Fenix BC30 v2.0 is IP67 rated, meaning it is dustproof and protected against temporary immersion in water up to 1 meter for 30 minutes. While it is highly water-resistant, avoid prolonged submersion and ensure the tail cap is securely tightened before exposure to water.

Image: The Fenix BC30 v2.0 bicycle light operating in rainy conditions, demonstrating its IP67 water resistance.

6. ట్రబుల్షూటింగ్

6.1 Light Does Not Turn On or Flickers

• బ్యాటరీలను తనిఖీ చేయండి: Ensure batteries are correctly inserted with proper polarity and are fully charged. Replace with fresh, charged batteries if necessary.
• బ్యాటరీ కాంటాక్ట్: Clean the battery contacts in the light and on the batteries with a clean cloth. Dirty contacts can interrupt power flow.
• Tail Cap: టెయిల్ క్యాప్ గట్టిగా స్క్రూ చేయబడిందని నిర్ధారించుకోండి. వదులుగా ఉండే టెయిల్ క్యాప్ విద్యుత్ సంబంధాన్ని నిరోధించవచ్చు.

6.2 Light Turns Off on Bumps

• బ్యాటరీ రకం: Ensure you are using 18650 batteries with a button top. Flat-top batteries may not maintain sufficient contact on rough terrain.
• Battery Fit: Verify that the batteries fit snugly within the compartment. If there is excessive play, consider using batteries with slightly larger button tops or adding a small, non-conductive spacer if safe to do so (consult Fenix support first).
• మౌంట్ సెక్యూరిటీ: Ensure the quick adjust bike mount is securely tightened to the handlebar and the light unit is firmly clicked into the mount.

6.3 Wireless Remote Not Responding

• రిమోట్‌లో బ్యాటరీ: Check if the battery in the wireless remote needs replacement.
• సామీప్యత: Ensure the remote is within effective range of the light unit.
• తిరిగి జత చేయడం: If issues persist, consult Fenix support for re-pairing instructions if applicable.

If troubleshooting steps do not resolve the issue, please contact Fenix customer support for further assistance.

7. స్పెసిఫికేషన్లు

7.1 Output and Runtime Table

Note: The above specifications are test results given by Fenix through its laboratory testing using two Fenix ARB-L18-3500 rechargeable Li-ion batteries under the temperature of 21±3°C and humidity of 50% - 80%. True performance may vary according to different working environments and the actual batteries used.

8. వారంటీ మరియు మద్దతు

Fenix products are covered by a warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official Fenix website or contact Fenix customer support directly.

For technical support, troubleshooting assistance, or warranty claims, please contact Fenix customer service through their official channels.

• Official Fenix Webసైట్: www.fenixlight.com
• Customer Support Contact Information: Refer to the "Contact Us" section on the official webసైట్.

9. ముఖ్యమైన భద్రతా సమాచారం

• నేరుగా కళ్లలోకి కాంతిని ప్రకాశింపజేయవద్దు.
• పిల్లలకు దూరంగా ఉంచండి.
• Do not disassemble the sealed head of the light, as doing so may cause damage to the light and will void the warranty.
• సిఫార్సు చేయబడిన బ్యాటరీలను మాత్రమే ఉపయోగించండి.
• స్థానిక నిబంధనల ప్రకారం బ్యాటరీలను బాధ్యతాయుతంగా పారవేయండి.

10. అధికారిక ఉత్పత్తి వీడియోలు

అందించిన ఉత్పత్తి డేటా ఆధారంగా, ఈ మాన్యువల్‌లో పొందుపరచడానికి విక్రేత నుండి అధికారిక ఉత్పత్తి వీడియోలు అందుబాటులో లేవు.