WORKPRO Pink Cordless Drill Driver Set User Manual

1. పరిచయం మరియు ఓవర్view

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your WORKPRO Pink Cordless Drill Driver Set. Please read this manual thoroughly before initial use and retain it for future reference.

Figure 1: The WORKPRO Pink Cordless Drill Driver Set, including the drill, battery, charger, and various bits.

The WORKPRO Pink Cordless Drill Driver is a versatile 12V electric tool designed for various drilling and driving tasks. Its lightweight and ergonomic design makes it suitable for extended use and maneuverability in tight spaces. Key features include a 3/8" keyless chuck, two-speed settings, 18+1 torque adjustment, and an integrated LED light for improved visibility.

2 చేర్చబడిన భాగాలు

Your WORKPRO Pink Cordless Drill Driver Set includes the following items:

• 1 x 12V కార్డ్‌లెస్ డ్రిల్ డ్రైవర్
• 1 x క్యారీయింగ్ బ్యాగ్
• 1 x 1500 mAh లిథియం-అయాన్ బ్యాటరీ
• 1 x 0.4A ఛార్జర్
• 10 x 1" CR-V Bits (PH1, PH2, PH3, 1/8, 5/32, 3/16, 1/4, T10, T15, T20)
• 6 x Twist Drill Bits (1/8'', 5/32'', 3/16", 11/64", 7/32', 1/4'')
• 1 x బిట్ హోల్డర్

Figure 2: All items included in the WORKPRO Pink Cordless Drill Driver Set.

3. సెటప్

3.1 బ్యాటరీ ఛార్జింగ్

Before first use, fully charge the 1500 mAh Lithium-ion battery. To charge, remove the battery from the drill by pressing the release buttons on the sides of the battery pack and sliding it out. Connect the 0.4A charger to the battery's charging port and plug the charger into a standard electrical outlet. The charging indicator light on the charger will change color (e.g., red to green) to indicate a full charge. Charging typically takes several hours.

Figure 3: Detached battery and charger for the drill driver.

3.2 Attaching/Changing Bits (Keyless Chuck)

The drill features a 3/8" keyless chuck for easy bit changes. To insert a bit:

1. Rotate the chuck counter-clockwise until the jaws are wide enough to accept the desired drill bit or screwdriver bit.
2. బిట్‌ను పూర్తిగా చక్‌లోకి చొప్పించండి.
3. Rotate the chuck clockwise until the jaws firmly grip the bit. Ensure the bit is centered and securely tightened to prevent slippage during operation.

Figure 4: Detail of the keyless chuck mechanism.

4. ఆపరేటింగ్ సూచనలు

4.1 Powering On/Off and Forward/Reverse Control

The drill is activated by pressing the trigger switch. The forward/reverse switch, located above the trigger, allows you to change the rotation direction. Push the switch to the left for forward rotation (for driving screws) and to the right for reverse rotation (for removing screws). A center position locks the trigger for safety and prevents accidental activation.

4.2 స్పీడ్ సెట్టింగులు

The drill offers two variable speed settings:

• తక్కువ వేగం (0-400 RPM): Ideal for driving screws and applications requiring higher torque and more control.
• అధిక వేగం (0-1500 RPM): Suitable for drilling and tasks requiring faster rotation.

Adjust the speed using the speed selector switch located on top of the drill.

Figure 5: Two-speed transmission settings for drilling and screwdriving.

4.3 Torque Adjustment (18+1 Clutch)

The 18+1 torque clutch allows you to select the appropriate torque setting for different materials and screw sizes, preventing overtightening or stripping screws. The "1" setting is for minimal torque, while "18" provides maximum torque. The "+1" setting is for drilling mode, bypassing the clutch for continuous power.

Figure 6: Torque adjustment ring with 18 settings plus a drilling mode.

4.4 అంతర్నిర్మిత LED లైట్

A trigger-activated LED light illuminates the work area, providing enhanced visibility in dimly lit environments and reducing shadows.

Figure 7: The built-in LED light provides illumination for dark working environments.

5. నిర్వహణ

5.1 బ్యాటరీ సంరక్షణ

To prolong the life of your Lithium-ion battery, it is recommended to recharge it every 3-6 months if the drill is not used frequently. Avoid completely draining the battery before recharging, as this can reduce its overall lifespan.

5.2 సాధారణ శుభ్రపరచడం

Regularly clean the drill's exterior with a soft, damp వస్త్రం. కఠినమైన రసాయనాలు లేదా రాపిడి క్లీనర్‌లను ఉపయోగించవద్దు. మోటారు సరైన శీతలీకరణను నిర్ధారించడానికి వెంటిలేషన్ ఓపెనింగ్‌లను దుమ్ము మరియు శిధిలాలు లేకుండా ఉంచండి.

6. ట్రబుల్షూటింగ్

If you encounter issues with your WORKPRO Pink Cordless Drill Driver, refer to the following common troubleshooting steps:

• డ్రిల్ ఆన్ చేయడం లేదు: బ్యాటరీ పూర్తిగా ఛార్జ్ చేయబడిందని మరియు సరిగ్గా చొప్పించబడిందని నిర్ధారించుకోండి. ఫార్వర్డ్/రివర్స్ స్విచ్ లాక్ చేయబడిన (మధ్య) స్థానంలో లేదని తనిఖీ చేయండి.
• బ్యాటరీ ఛార్జింగ్ కాదు: Verify the charger is correctly plugged into both the battery and a working electrical outlet. Check the charger's indicator light. If the issue persists, the battery or charger may need replacement.
• చక్‌లో బిట్ జారడం: Ensure the chuck is tightened securely around the bit. If the bit continues to slip, the chuck jaws may be worn or damaged.
• తగ్గిన శక్తి/పనితీరు: The battery may be low on charge. Ensure the correct speed and torque settings are selected for the task.

For more complex issues, consult the full User Manual (PDF) or contact WORKPRO customer support.

7. స్పెసిఫికేషన్లు

8. Additional Resources and Support

For detailed instructions, safety guidelines, and further assistance, please refer to the official PDF user manuals:

• వినియోగదారు గైడ్ (PDF)
• వినియోగదారు మాన్యువల్ (PDF)

For customer support or warranty inquiries, please visit the official WORKPRO webసైట్ లేదా వారి కస్టమర్ సర్వీస్ విభాగాన్ని నేరుగా సంప్రదించండి.