ఎక్స్‌మార్క్ 126-4860

Exmark 126-4860 Tire and Wheel Instruction Manual

Brand: Exmark | Model: 126-4860

1. పరిచయం

This manual provides essential information for the proper installation, operation, and maintenance of your Exmark 126-4860 Tire and Wheel. This genuine Exmark replacement part is designed for compatibility with Exmark Radius E-Series and S-Series lawnmowers. Please read this manual thoroughly before use to ensure safe and efficient performance.

2. భద్రతా సమాచారం

Always prioritize safety when handling and installing replacement parts. Failure to follow safety instructions can result in serious injury or property damage.

3. ఉత్పత్తి ముగిసిందిview

The Exmark 126-4860 is a genuine factory replacement tire and wheel assembly. It is designed to provide reliable performance and proper fit for compatible Exmark lawnmower models.

Exmark 126-4860 Tire and Wheel, top view

మూర్తి 3.1: టాప్ view of the Exmark 126-4860 Tire and Wheel assembly.

Exmark 126-4860 Tire and Wheel, side view with part number label

మూర్తి 3.2: వైపు view showing the part number label on the tire and wheel.

Exmark lawnmower in operation, demonstrating the application of the wheel

Figure 3.3: An Exmark lawnmower, illustrating the type of equipment this wheel is designed for.

అనుకూలత:

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

This section outlines the general steps for replacing a lawnmower wheel. Always consult your specific lawnmower's service manual for detailed, model-specific instructions.

  1. Prepare the Lawnmower: Park the lawnmower on a flat, stable surface. Turn off the engine, remove the ignition key, and disconnect the spark plug wire to prevent accidental starting. Allow the engine and exhaust to cool completely.
  2. Secure the Lawnmower: Use a jack or appropriate lifting device to raise the side of the lawnmower where the wheel needs to be replaced. Support the mower securely with jack stands or blocks to prevent it from falling.
  3. పాత చక్రాన్ని తీసివేయండి: Depending on your mower model, you may need to remove a hubcap, retaining clip, nut, or bolt securing the old wheel to the axle. Carefully slide the old wheel off the axle.
  4. Inspect the Axle: Clean any debris from the axle and inspect it for damage or wear. Apply a thin layer of grease to the axle if recommended by your mower's manual.
  5. కొత్త చక్రాన్ని ఇన్‌స్టాల్ చేయండి: Slide the new Exmark 126-4860 Tire and Wheel onto the axle, ensuring it is fully seated. Reinstall any washers, nuts, clips, or hubcaps in the reverse order of removal. Tighten fasteners to the torque specifications provided in your mower's manual.
  6. Lower the Lawnmower: Carefully lower the lawnmower to the ground.
  7. స్పార్క్ ప్లగ్‌ను తిరిగి కనెక్ట్ చేయండి: స్పార్క్ ప్లగ్ వైర్‌ను తిరిగి కనెక్ట్ చేయండి.

5. ఆపరేటింగ్ పరిగణనలు

While the wheel itself does not have operational controls, its proper function is critical to the safe and effective operation of your lawnmower.

6. నిర్వహణ

Regular maintenance of your tire and wheel assembly will extend its lifespan and ensure optimal performance of your lawnmower.

7. ట్రబుల్షూటింగ్

This section addresses common issues related to lawnmower wheels.

సమస్యసాధ్యమైన కారణంపరిష్కారం
Wobbly WheelLoose axle nut/bolt; Worn axle bushing/bearing; Bent wheel rimTighten fasteners; Inspect and replace worn components; Replace wheel if bent
Flat Tire (if applicable)Puncture; Leaky valve stem; Improper bead sealRepair puncture; Replace valve stem; Re-seat tire bead or seek professional repair
Excessive Tire WearImproper tire pressure; Operating on abrasive surfaces; Misaligned axleAdjust tire pressure; Avoid harsh terrain; Consult mower manual for alignment checks

8. స్పెసిఫికేషన్లు

Key specifications for the Exmark 126-4860 Tire and Wheel assembly.

గుణంవిలువ
తయారీదారుఎక్స్‌మార్క్
పార్ట్ నంబర్126-4860
మోడల్చక్రం
వస్తువు బరువు7.7 పౌండ్లు
ఉత్పత్తి కొలతలు12 x 12 x 12 అంగుళాలు
UPC193308124001
వాహన సేవా రకంLawnmowers, Exmark Radius E-Series, Exmark Radius S-Series

9. వారంటీ మరియు మద్దతు

This product is a genuine Exmark Toro Factory Part, ensuring quality and compatibility. For specific warranty information, please refer to the official Exmark website or contact Exmark customer support directly.

Purchases may be eligible for a 30-day free return, refund, or replacement policy, depending on the retailer's terms.

Exmark Original Parts logo

Figure 9.1: Exmark Original Parts logo, signifying genuine product.

For further assistance or technical support, please visit the official Exmark webసైట్ లేదా వారి అధీకృత సేవా కేంద్రాలను సంప్రదించండి.

Exmark Store Link: Exmark Official Store

సంబంధిత పత్రాలు - 126-4860

ముందుగాview ఎక్స్‌మార్క్ రేడియస్ ఇ-సీరీస్ RAE708GEM60300 పార్ట్స్ మాన్యువల్
Exmark RADIUS E-SERIES RAE708GEM60300 జీరో-టర్న్ మొవర్ కోసం వివరణాత్మక భాగాల మాన్యువల్. సమర్థవంతమైన నిర్వహణ మరియు మరమ్మత్తు కోసం రేఖాచిత్రాలు, భాగాల సంఖ్యలు మరియు అసెంబ్లీ సమాచారాన్ని కలిగి ఉంటుంది.
ముందుగాview ఎక్స్‌మార్క్ వెర్టెక్స్ ఇ-సిరీస్ స్టాండ్-ఆన్ లాన్ మోవర్ ఆపరేటర్స్ మాన్యువల్
ఈ మాన్యువల్ ఎక్స్‌మార్క్ వెర్టెక్స్ ఇ-సిరీస్ స్టాండ్-ఆన్ లాన్ మొవర్ కోసం ఆపరేటింగ్, నిర్వహణ, సర్దుబాటు మరియు భద్రతా సూచనలను అందిస్తుంది. భద్రతా లక్షణాలు, నియంత్రణలు, స్పెసిఫికేషన్లు మరియు ప్రొఫెషనల్ లాన్ కేర్ కోసం సరైన వినియోగం గురించి తెలుసుకోండి.
ముందుగాview ఎక్స్‌మార్క్ మెట్రో. 21 ఆపరేటర్ మాన్యువల్
ఎక్స్‌మార్క్ మెట్రో. 21 లాన్ మోవర్ కోసం సమగ్ర ఆపరేటర్ మాన్యువల్, భద్రత, ఆపరేషన్, నిర్వహణ, ట్రబుల్షూటింగ్ మరియు వారంటీ సమాచారాన్ని కవర్ చేస్తుంది.
ముందుగాview ఎక్స్‌మార్క్ క్వెస్ట్™ ఆపరేటర్ మాన్యువల్
ఈ ఆపరేటర్ మాన్యువల్ ఎక్స్‌మార్క్ క్వెస్ట్™ జీరో-టర్న్ మొవర్ యొక్క సురక్షితమైన మరియు ప్రభావవంతమైన ఆపరేషన్ మరియు నిర్వహణ కోసం అవసరమైన సమాచారాన్ని అందిస్తుంది. ఇందులో భద్రతా జాగ్రత్తలు, ఆపరేటింగ్ సూచనలు, నిర్వహణ షెడ్యూల్‌లు మరియు ట్రబుల్షూటింగ్ చిట్కాలు ఉన్నాయి.
ముందుగాview Exmark COMMERCIAL 30 సెటప్ సూచనలు | ఇన్‌స్టాలేషన్ గైడ్
Exmark COMMERCIAL 30 మొవర్ కోసం దశల వారీ సెటప్ సూచనలు, హ్యాండిల్ ఇన్‌స్టాలేషన్, ఇంజిన్ సర్వీసింగ్ మరియు పార్ట్స్ వెరిఫికేషన్‌తో సహా. సీరియల్ నంబర్లు 411,294,212 మరియు అంతకంటే ఎక్కువ కవర్ చేస్తుంది.
ముందుగాview ఎక్స్‌మార్క్ రెడ్ ఎక్విప్డ్ యూజర్ గైడ్ - డీజిల్ మోడల్స్
ఎక్స్‌మార్క్ RED ఎక్విప్డ్ డీజిల్ మూవర్స్ కోసం సమగ్ర యూజర్ గైడ్, ఇది RED టెక్నాలజీ సిస్టమ్, ఆపరేటర్ ఇంటర్‌ఫేస్, నియంత్రణలు, స్క్రీన్ ఐకాన్‌లు, ఇంజిన్ మోడ్‌లు, DPF పునరుత్పత్తి ప్రక్రియలు, మెనూ ఎంపికలు మరియు డీజిల్ మోడళ్ల ట్రబుల్షూటింగ్ గురించి వివరిస్తుంది.