1. పరిచయం మరియు ఓవర్view
The Paradox PMD2P is a Magellan Wireless PIR Motion Detector designed for use with Magellan wireless receivers/transceivers. This device features built-in pet immunity, making it suitable for environments with animals weighing up to 18kg (40 pounds). It incorporates advanced features such as automatic temperature compensation and an innovative energy-saving mode to optimize battery life.
The PMD2P is also equipped with a dual tamper mechanism, providing enhanced security by triggering an alarm if the front cover is removed or if the detector is dismounted from its wall installation.
కీ ఫీచర్లు
- Single-Optic PIR Motion Detector with Built-In Pet Immunity (up to 18kg / 40lb)
- Battery-Powered with an innovative three-minute energy save mode after two detections within a five-minute period.
- ALIVE Software ensures the alarm LED continues to display in energy save mode without compromising battery life.
- డ్యూయల్ టిamper Protection: An alarm/tamper is generated if the front cover is removed or if the detector is removed from the wall.
- Dual Element Sensor, Patented Auto Pulse Signal Processing, and Automatic Temperature Compensation.
- Coverage: 11m x 11m (35ft x 35ft) with up to 15m (50ft) for center beams and an 88.5° viewing కోణం.
- Wireless Range: 35m (115ft) with MG6160, MG6130, & MG6250; 70m (230ft) with MG5000, MG5050, & RTX3 in typical residential environments.
- Slide switch to select high or low sensitivity.
మూర్తి 1: ముందు view of the PMD2P Motion Detector.
2. సెటప్ మరియు ఇన్స్టాలేషన్
2.1 అన్ప్యాకింగ్ మరియు భాగాలు
Before installation, ensure all components are present: PMD2P motion detector unit, mounting screws, and 3 AAA batteries (included).
2.2 బ్యాటరీ ఇన్స్టాలేషన్
- Carefully open the front cover of the PMD2P unit.
- బ్యాటరీ కంపార్ట్మెంట్ను గుర్తించండి.
- Insert 3 x AAA alkaline batteries, ensuring correct polarity (+/-).
- ముందు కవర్ను సురక్షితంగా మూసివేయండి.
Note: The device requires 3 AAA batteries. Battery life expectancy will vary according to the amount of traffic (movement) detected. Higher traffic levels will lower battery life.
2.3 మౌంటు మార్గదర్శకాలు
The PMD2P is designed for wall mounting. Choose a location that provides optimal coverage of the desired area, avoiding direct sunlight, heat sources, or areas with significant air drafts that could cause false alarms.
- Mount the detector at a height appropriate for its detection pattern and pet immunity feature.
- For the wall tamper removal feature to be functional, a screw needs to be inserted into the designated wall tamper hole during mounting.
- మౌంటు ఉపరితలం స్థిరంగా మరియు సురక్షితంగా ఉందని నిర్ధారించుకోండి.
Figure 2: Side and Angled views for mounting reference.
3. ఆపరేటింగ్ సూచనలు
3.1 మోషన్ డిటెక్షన్
The PMD2P uses a Passive Infrared (PIR) sensor to detect changes in infrared radiation caused by movement within its detection zone. When motion is detected, the device transmits a signal to the connected Magellan wireless receiver/transceiver.
The detector has a coverage area of 11m x 11m (35ft x 35ft) with center beams extending up to 15m (50ft) and an 88.5° viewing angle. Its pet immunity feature prevents false alarms from animals weighing up to 18kg (40lb).
3.2 Energy Save Mode
To conserve battery life, the PMD2P enters an energy save mode after two detections within a five-minute period. During this mode, the ALIVE software ensures that the alarm LED continues to display without compromising battery life, providing visual confirmation of activity.
3.3 సున్నితత్వం సర్దుబాటు
A slide switch inside the unit allows you to select between high or low sensitivity settings. Adjust this setting based on your environment and specific detection needs to optimize performance and minimize false alarms.
Figure 3: PMD2P Detection Pattern.
4. నిర్వహణ
4.1 బ్యాటరీ భర్తీ
When the batteries are low, the system will typically indicate a low battery condition. To replace the batteries:
- Open the front cover of the detector.
- Remove the old 3 x AAA alkaline batteries.
- Insert new 3 x AAA alkaline batteries, observing correct polarity.
- ముందు కవర్ను సురక్షితంగా మూసివేయండి.
స్థానిక నిబంధనల ప్రకారం పాత బ్యాటరీలను పారవేయండి.
4.2 శుభ్రపరచడం
To ensure optimal performance, periodically clean the exterior of the PMD2P detector. Use a soft, dry cloth to wipe away dust and dirt. Do not use abrasive cleaners or solvents, as these can damage the unit.
Avoid touching the sensor lens directly, as fingerprints or smudges can affect detection accuracy.
5. ట్రబుల్షూటింగ్
5.1 తప్పుడు అలారాలు
- పర్యావరణ కారకాలు: Ensure the detector is not mounted near heat sources (vents, radiators), direct sunlight, or areas with strong air currents (e.g., open windows, fans).
- పెంపుడు రోగనిరోధక శక్తి: Verify that pets are within the specified weight limit (up to 18kg / 40lb). If larger pets are present, consider adjusting the mounting height or sensitivity.
- సున్నితత్వం సెట్టింగ్: Try adjusting the sensitivity switch to the 'Low' setting if false alarms persist.
5.2 No Detection
- బ్యాటరీ స్థాయి: బ్యాటరీలు అయిపోయాయో లేదో తనిఖీ చేయండి. అవసరమైతే వాటిని మార్చండి.
- అడ్డంకులు: Ensure there are no physical obstructions blocking the detector's field of view.
- మౌంటు ఎత్తు: Confirm the detector is mounted at an appropriate height for optimal coverage.
- వైర్లెస్ కనెక్షన్: Verify that the PMD2P is properly paired with its Magellan wireless receiver/transceiver and that the signal strength is adequate.
5.3 టిampఎర్ అలారం
- కవర్ టిamper: Ensure the front cover is securely closed.
- వాల్ టిamper: If the detector was removed from the wall, re-mount it securely, ensuring the screw is inserted into the wall tamper hole to engage the mechanism.
6. సాంకేతిక లక్షణాలు
| పరామితి | వివరాలు |
|---|---|
| సెన్సార్ రకం | Dual rectangular element |
| కవరేజ్ | 88.5° - 11m x 11m (36ft x 36ft); Center beams: 15m (49ft) |
| పెంపుడు జంతువు రోగనిరోధక శక్తి | 18kg (40lbs) |
| RF ఫ్రీక్వెన్సీ | 433 MHz with Magellan only |
| లెన్స్ | 2nd generation Fresnel lens, LODIFF® segments |
| నడక వేగం | 0.2m to 3.5m/s (0.6ft to 11.5ft/s) |
| Battery Type & Life | 3 x 1.5VDC "AAA" alkaline batteries; 2 years* |
| ప్రస్తుత రేటింగ్ | 31uA standby / 15mA alarm |
| ట్రాన్స్మిటర్ పరిధి | 35m (115ft) with MG6130 / MG6160; 70m (230ft) with MG5000 / MG5050 / RTX3 |
| ఆపరేటింగ్ ఉష్ణోగ్రత & తేమ | 0°C to 50°C (32°F to 122°F) / 5 to 90% max. |
| కొలతలు & బరువు | 6.5 x 12.5 x 5.2cm (2.5 x 4.9 x 2.0 in) / 105 g (3.7 oz) with batteries |
| RF రోగనిరోధక శక్తి | EN 50130-4: 10V/m 80MHz to 2.7GHz |
| అనుకూలత | Magellan wireless receivers/transceivers (MG6160, MG6130, MG6250, MG5000, MG5050, RTX3) |
| సర్టిఫికేషన్ | EN 300-200 Certified, EN 50131 Certified (Grade 2 Class II) |
*Battery life expectancy will vary according to the amount of traffic (movement) detected. Higher traffic levels will lower battery life.
Figure 4: PMD2P Technical Specifications Table.
7. వారంటీ మరియు మద్దతు
7.1 వారంటీ సమాచారం
For detailed warranty information regarding your Paradox PMD2P motion detector, please refer to the warranty card included with your product or visit the official Paradox Security Systems webసైట్. వారంటీ నిబంధనలు మరియు షరతులు ప్రాంతాన్ని బట్టి మారవచ్చు.
7.2 కస్టమర్ మద్దతు
If you encounter any issues or have questions not covered in this manual, please contact Paradox customer support or visit their official website for further assistance, FAQs, and updated documentation.
అధికారిక Webసైట్: www.paradox.com
