లెప్రో 500014

ట్యూనబుల్ వైట్ LED స్ట్రిప్ లైట్ యూజర్ మాన్యువల్ కోసం లెప్రో రిమోట్ కంట్రోలర్

మోడల్: 500014

పరిచయం

Thank you for choosing the Lepro Remote Controller for your Tunable White LED Strip Light. This manual provides detailed instructions for setting up, operating, and maintaining your remote control to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

ఉత్పత్తి ముగిసిందిview

The Lepro Remote Controller is designed to provide convenient control over your tunable white LED strip lights, allowing you to adjust brightness, color temperature, and activate various lighting modes.

Lepro Remote Controller

చిత్రం: ముందు భాగం view of the Lepro Remote Controller.

రిమోట్ కంట్రోల్ బటన్ విధులు

Lepro Remote Controller Button Functions

Image: Diagram illustrating the functions of each button on the Lepro Remote Controller.

  • ఆన్/ఆఫ్ బటన్లు: Power on or off the LED strip light.
  • 60S OFF Button: Activates a 60-second auto-off timer.
  • ప్రకాశం +/- బటన్లు: కాంతి యొక్క ప్రకాశం స్థాయిని సర్దుబాటు చేయండి.
  • WW (Warm White) Button: Sets the light to a warm white color temperature.
  • NW (Neutral White) Button: Sets the light to a neutral white color temperature.
  • DW (Daylight White) Button: Sets the light to a daylight white (cool white) color temperature.
  • Colour Temperature +/- Buttons: Fine-tune the color temperature between warm and cool white.
  • మోడ్ బటన్: Cycles through fast/slow flash modes.
  • Scene Buttons (Morning/Evening/Night): Activates pre-set lighting scenes.

సెటప్

బ్యాటరీ సంస్థాపన

The remote controller requires 1 Lithium Metal battery (included). Before first use, please remove the insulation sheet from the battery compartment.

Remove Insulation Sheet

Image: Illustration showing how to remove the insulation sheet from the battery compartment.

  1. రిమోట్ కంట్రోల్ వెనుక బ్యాటరీ కంపార్ట్‌మెంట్‌ను గుర్తించండి.
  2. Pull out the plastic insulation sheet if it is present.
  3. If replacing the battery, open the battery cover and insert the new battery, ensuring correct polarity (+/-).
  4. బ్యాటరీ కవర్‌ను సురక్షితంగా మూసివేయండి.

Pairing (If Applicable)

This remote control uses Radio Frequency (RF) technology and is typically pre-paired with compatible Lepro tunable white LED strip lights (e.g., models 410098, 410049). If your remote does not respond to the light strip, ensure the light strip is powered on and within the maximum range of 10 meters. No manual pairing procedure is usually required for this model.

ఆపరేటింగ్ సూచనలు

Once the battery is installed, you can begin controlling your LED strip light.

  • పవర్ ఆన్/ఆఫ్: నొక్కండి ON లైట్ ఆన్ చేయడానికి బటన్, మరియు ఆఫ్ దాన్ని ఆపివేయడానికి బటన్.
  • ప్రకాశం సర్దుబాటు: ఉపయోగించండి ప్రకాశం +/- buttons (sun icon with up/down arrows) to increase or decrease the light intensity.
  • రంగు ఉష్ణోగ్రత ఎంపిక:
    • నొక్కండి WW for Warm White.
    • నొక్కండి NW for Neutral White.
    • నొక్కండి DW for Daylight White (Cool White).
    Color Temperature Exampలెస్

    Image: Visual representation of Warm White, Natural White, and Cool White color temperatures.

  • Fine-tuning Color Temperature: ఉపయోగించండి Colour Temperature +/- buttons (yellow up/down arrows) to incrementally adjust the color temperature.
  • ఫ్లాష్ మోడ్‌లు: నొక్కండి మోడ్ button to cycle through different fast/slow flash modes.
  • దృశ్య రీతులు: Select pre-set scenes using the dedicated buttons:
    • Morning Scene: (Sunrise icon)
    • Evening Scene: (Sunset icon)
    • రాత్రి దృశ్యం: (Moon and stars icon)
  • 60-Second Auto Off: నొక్కండి 60S ఆఫ్ button to activate a timer that will turn off the light after 60 seconds.

నిర్వహణ

క్లీనింగ్

To clean the remote controller, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

బ్యాటరీ భర్తీ

If the remote control's range decreases or it becomes unresponsive, the battery may need to be replaced. Refer to the "Battery Installation" section under Setup for instructions.

గమనిక: స్థానిక నిబంధనల ప్రకారం ఉపయోగించిన బ్యాటరీలను బాధ్యతాయుతంగా పారవేయండి.

ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
Remote not responding to light strip.
  • బ్యాటరీ డెడ్ లేదా తక్కువగా ఉంది.
  • Insulation sheet not removed.
  • రిమోట్ పరిధి వెలుపల ఉంది.
  • Light strip is not powered on.
  • బ్యాటరీని భర్తీ చేయండి.
  • ఇన్సులేషన్ షీట్ తొలగించండి.
  • Move closer to the light strip (within 10 meters).
  • Ensure the light strip is properly connected and powered.
Limited range of control.
  • తక్కువ బ్యాటరీ.
  • Obstructions between remote and light strip.
  • బ్యాటరీని భర్తీ చేయండి.
  • Ensure a clear line of sight or reduce obstructions.

స్పెసిఫికేషన్లు

  • మోడల్: 500014
  • బ్రాండ్: లెప్రో
  • ఉత్పత్తి కొలతలు: 8.5 x 4 x 0.7 సెం.మీ
  • బరువు: 20 గ్రా
  • బ్యాటరీ: 1 లిథియం మెటల్ బ్యాటరీ (అవసరం)
  • కనెక్టివిటీ టెక్నాలజీ: రేడియో ఫ్రీక్వెన్సీ (RF)
  • గరిష్ట పరిధి: 10 మీటర్లు
  • బటన్ల సంఖ్య: 14
  • అనుకూల పరికరాలు: Lepro LED Strip Light 410098, LED Strip Light 410049

ముఖ్యమైన సమాచారం

లైట్ బల్బ్ రీసైక్లింగ్

For information on recycling this product and other types of lamps, please consult local recycling guidelines and facilities.

లైట్ బల్బ్ బ్రేకేజ్ మరియు క్లీన్ అప్ సమాచారం

In case of breakage or damage to associated light bulbs, follow proper clean-up and disposal procedures as recommended by local authorities. Avoid direct contact with broken glass or internal components.

వారంటీ మరియు మద్దతు

వారంటీ సమాచారం మరియు కస్టమర్ మద్దతు కోసం, దయచేసి అధికారిక లెప్రోను చూడండి. webసైట్‌లో లేదా మీ రిటైలర్‌ను సంప్రదించండి. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.

మరిన్ని సహాయం కోసం, మీరు సందర్శించవచ్చు అమెజాన్‌లో లెప్రో స్టోర్.

సంబంధిత పత్రాలు - 500014

ముందుగాview లెప్రో S1 స్మార్ట్ LED స్ట్రిప్ లైట్స్ యూజర్ మాన్యువల్
లెప్రో S1 స్మార్ట్ LED స్ట్రిప్ లైట్ల (మోడల్: 2A3MAS1) కోసం సమగ్ర వినియోగదారు మాన్యువల్, ఇన్‌స్టాలేషన్, ఆపరేషన్ మరియు లక్షణాలను వివరిస్తుంది.
ముందుగాview లెప్రో LED లైట్ స్ట్రిప్ యూజర్ మాన్యువల్ మరియు స్పెసిఫికేషన్స్
లెప్రో LED లైట్ స్ట్రిప్స్ (మోడల్ PR4100067 సిరీస్) కోసం యూజర్ మాన్యువల్. ఇన్‌స్టాలేషన్, భద్రత, స్పెసిఫికేషన్‌లు మరియు డిస్పోజల్ సమాచారాన్ని కలిగి ఉంటుంది.
ముందుగాview లెప్రో S1 స్మార్ట్ LED స్ట్రిప్ లైట్: ఇన్‌స్టాలేషన్, ఫీచర్లు మరియు సేఫ్టీ గైడ్
లెప్రో S1 స్మార్ట్ LED స్ట్రిప్ లైట్ కోసం సమగ్ర గైడ్, ఇన్‌స్టాలేషన్, యాప్ కనెక్షన్, వాయిస్ కంట్రోల్ ఇంటిగ్రేషన్, భద్రతా జాగ్రత్తలు, సాంకేతిక వివరణలు మరియు వారంటీ సమాచారాన్ని కవర్ చేస్తుంది.
ముందుగాview లెప్రో R2 స్మార్ట్ LED డౌన్‌లైట్ ఇన్‌స్టాలేషన్ మరియు యూజర్ గైడ్
లెప్రో R2 స్మార్ట్ LED డౌన్‌లైట్‌ను ఇన్‌స్టాల్ చేయడం మరియు ఉపయోగించడం కోసం సమగ్ర గైడ్, యాప్ కనెక్షన్, వాయిస్ కంట్రోల్ సెటప్, మౌంటింగ్ మరియు భద్రతా సమాచారాన్ని కవర్ చేస్తుంది.
ముందుగాview లెప్రో BR2 స్మార్ట్ LED బల్బ్ సెటప్ మరియు వాయిస్ కంట్రోల్ గైడ్
మీ లెప్రో BR2 స్మార్ట్ LED బల్బును సెటప్ చేయడానికి సమగ్ర గైడ్. బ్లూటూత్ మరియు వైఫై ద్వారా కనెక్ట్ అవ్వడం, అమెజాన్ అలెక్సా మరియు గూగుల్ అసిస్టెంట్‌తో ఇంటిగ్రేట్ చేయడం మరియు సాధారణ సమస్యలను పరిష్కరించడం ఎలాగో తెలుసుకోండి. సాంకేతిక వివరణలు మరియు నియంత్రణ సమ్మతి సమాచారం ఉన్నాయి.
ముందుగాview లెప్రో LED హెడ్‌లైట్amp యూజర్ మాన్యువల్ మరియు సేఫ్టీ గైడ్
లెప్రో LED హెడ్ల్ కోసం సమగ్ర యూజర్ మాన్యువల్amp (మోడల్ 3200008 సిరీస్), లక్షణాలు, ఆపరేటింగ్ సూచనలు, భద్రతా జాగ్రత్తలు మరియు సంప్రదింపు సమాచారంతో సహా.