Sharp Home LED Digital Alarm Clock User Manual

1. పరిచయం

Thank you for choosing the Sharp Home LED Digital Alarm Clock. This clock is designed for simplicity and ease of use, featuring a large red LED display, a convenient swivel base, and essential functions like alarm, snooze, and brightness control. This manual provides instructions for setup, operation, and maintenance to ensure optimal performance of your device.

2. భద్రతా సమాచారం

• Read all instructions before operating the clock.
• తీవ్రమైన ఉష్ణోగ్రతలు, ప్రత్యక్ష సూర్యకాంతి, దుమ్ము లేదా తేమకు యూనిట్‌ను బహిర్గతం చేయవద్దు.
• Use only the specified power source (AC 120V outlet). Do not use with 240V.
• Keep the unit away from water or other liquids.
• యూనిట్‌ను విడదీయడానికి లేదా సవరించడానికి ప్రయత్నించవద్దు. అన్ని సర్వీసింగ్‌లను అర్హత కలిగిన సిబ్బందికి సూచించండి.
• యూనిట్ చుట్టూ సరైన వెంటిలేషన్ ఉండేలా చూసుకోండి.

3. సెటప్

3.1 పవర్ కనెక్షన్

To power the clock, plug the power cord into a standard US 120V electrical outlet. The clock will immediately display the time.

3.2 బ్యాటరీ బ్యాకప్ ఇన్‌స్టాలేషన్

For backup power during an outage, insert one 9V battery (not included) into the battery compartment located on the bottom of the clock. During battery backup, the display will go blank, but time and alarm settings will be retained, and the alarm will still sound at the set time.

ముందు view of the Sharp Home LED Digital Alarm Clock, displaying red LED digits on a gun metal grey case with a swivel base.

4. ఆపరేటింగ్ సూచనలు

4.1 సమయాన్ని సెట్ చేయడం

1. Locate the 'TIME SET' button on the back or bottom of the clock.
2. Press and hold the 'TIME SET' button. The hour digits will begin to flash.
3. Use the 'HOUR' and 'MINUTE' buttons to adjust the time. Observe the 'PM' indicator for correct AM/PM setting.
4. Release the 'TIME SET' button to save the time.

4.2 అలారం సెట్ చేస్తోంది

1. Locate the 'ALARM SET' button.
2. Press and hold the 'ALARM SET' button. The alarm hour digits will flash.
3. Use the 'HOUR' and 'MINUTE' buttons to set your desired alarm time.
4. Release the 'ALARM SET' button to save the alarm time. The 'ALM' indicator on the display will light up, indicating the alarm is active.

4.3 అలారం వాల్యూమ్ నియంత్రణ

The alarm features a high/low volume setting. Refer to the controls on the back or side of the clock to adjust the alarm volume to your preference.

4.4 స్నూజ్ ఫంక్షన్

When the alarm sounds, press the 'SNOOZE' button (usually a large button on top) to temporarily silence the alarm for approximately 9 minutes. You can press the snooze button repeatedly until the alarm is manually switched off.

4.5 Display Brightness Dimmer

The clock features a high/low brightness option for the LED display. Locate the 'DIMMER' or 'BRIGHTNESS' switch/button on the unit to adjust the display intensity to your comfort level, especially for nighttime viewing.

4.6 Swivel Base

The clock is equipped with a 90-degree swivel base, allowing you to adjust the viewing angle for optimal visibility from various positions in your room.

An infographic highlighting the clock's features: 1.8-inch red LED display, high/low alarm volume control, high/low display dimmer control, 90-degree swivel case, and optional 9V battery backup.

The Sharp LED Digital Alarm Clock shown rotating on its 90-degree swivel base, illustrating its adjustable viewing కోణం.

A diagram indicating the dimensions of the Sharp LED Digital Alarm Clock: 6.25 inches wide, 4 inches high, and 2.15 inches deep.

5. నిర్వహణ

• శుభ్రపరచడం: మృదువైన, పొడి గుడ్డతో గడియారాన్ని తుడవండి. రాపిడి క్లీనర్లు లేదా ద్రావకాలను ఉపయోగించవద్దు.
• బ్యాటరీ భర్తీ: Replace the 9V backup battery annually or as needed to ensure continuous backup functionality.
• నిల్వ: If storing the clock for an extended period, remove the backup battery to prevent leakage.

6. ట్రబుల్షూటింగ్

• No Display/Clock Not Working:
  Ensure the power cord is securely plugged into a working 120V outlet. Check if the outlet is receiving power. If using battery backup, remember the display goes blank during power outages, but internal functions are maintained.
• అలారం వినిపించడం లేదు:
  Verify that the alarm time is set correctly and the 'ALM' indicator is lit on the display. Check the alarm volume setting.
• డిస్ప్లే చాలా ప్రకాశవంతంగా/మసకగా:
  Adjust the brightness using the 'DIMMER' or 'BRIGHTNESS' control.
• Time Not Keeping Correctly:
  Ensure the clock is connected to a stable power source. If frequent power interruptions occur, ensure the backup battery is fresh.

7. స్పెసిఫికేషన్లు

8. వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Sharp webసైట్. ఏవైనా వారంటీ క్లెయిమ్‌లకు కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.