Z CAM E2-M4 4K సినిమా కెమెరా MFT యూజర్ మాన్యువల్

పరిచయం

This manual provides comprehensive instructions for the operation, setup, and maintenance of your Z CAM E2-M4 4K Cinema Camera MFT. The E2-M4 is designed for professional filmmakers and videographers, offering advanced features in a compact form factor. It features a 4/3" sensor for exceptional image quality and enhanced low-light performance, supporting 10/12-bit color and a wide dynamic range.

Key features of the Z CAM E2-M4 include:

• 4K @160fps, 10-bit color recording capability.
• 4/3" WDR CMOS sensor for superior image capture.
• 13 - 15 stops dynamic range, expandable to 16 stops with WDR enabled.
• ZRAW (partial debayer) support for flexible post-production.
• Gigabit Ethernet for data transfer, camera control, and live streaming.

పెట్టెలో ఏముంది

Upon unboxing your Z CAM E2-M4, please verify that all the following components are present:

• Z CAM E2-M4 4K Cinema Camera MFT Body
• LEMO Power Cable
• Lens Mount Cap

Note: Lenses, batteries, and storage media are sold separately.

ఉత్పత్తి ముగిసిందిview

Familiarize yourself with the various components and interfaces of the Z CAM E2-M4 camera.

మూర్తి 1.1: ముందు-కుడి view of the Z CAM E2-M4 camera, showcasing the Micro Four Thirds (MFT) lens mount, function buttons (F1-F4), power button, and CFast card slot.

మూర్తి 1.2: వెనుక-ఎడమ view of the Z CAM E2-M4 camera, highlighting the various mounting points and the robust, cube-like design.

మూర్తి 1.3: ముందు-ఎడమ view of the Z CAM E2-M4 camera, showing the lens mount and additional mounting points on the side.

మూర్తి 1.4: డైరెక్ట్ ఫ్రంట్ view of the Z CAM E2-M4 camera, emphasizing the MFT lens mount and the sensor behind it.

మూర్తి 1.5: టాప్ view of the Z CAM E2-M4 camera, displaying the integrated screen with status information (e.g., resolution, frame rate, ISO, shutter speed, aperture), record button, and navigation controls.

సెటప్ గైడ్

1. లెన్స్ అటాచ్ చేయడం

1. Remove the lens mount cap from the camera body by twisting it counter-clockwise.
2. Align the red dot on your MFT lens with the red dot on the camera's lens mount.
3. Gently insert the lens into the mount and twist clockwise until it clicks into place.

2. కెమెరాకు శక్తినివ్వడం

The Z CAM E2-M4 can be powered via a LEMO power cable or compatible NP-F series batteries (not included). For continuous operation, external power is recommended.

• Using LEMO Power Cable: Connect the provided LEMO power cable to the camera's power input port and to a suitable power source.
• Using NP-F Battery: Attach a charged NP-F battery to the battery plate on the rear of the camera. Ensure it is securely latched.

3. Inserting Storage Media (CFast 2.0)

1. Locate the CFast 2.0 card slot on the side of the camera.
2. Open the CFast card slot door.
3. Insert a compatible CFast 2.0 card with the label facing the correct direction (refer to the diagram near the slot). Push until it clicks into place.
4. Close the card slot door securely.
5. Note: It is recommended to format the CFast card in-camera before first use.

ఆపరేటింగ్ సూచనలు

1. పవర్ చేయడం ఆన్/ఆఫ్

• To power on, press and hold the power button (red circle icon) on the side of the camera until the display illuminates.
• To power off, press and hold the power button again until the display shuts down.

2. Basic Controls and Menu Navigation

The camera features a top-mounted display and control buttons for quick access to settings.

• మెనూ బటన్: Access the main menu system.
• FN బటన్: Access customizable function shortcuts.
• బాణం బటన్లు (పైకి/క్రిందికి): మెనూ ఎంపికల ద్వారా నావిగేట్ చేయండి లేదా విలువలను సర్దుబాటు చేయండి.
• సరే బటన్: Confirm selections or enter sub-menus.
• రికార్డ్ బటన్ (ఎరుపు వృత్తం): వీడియో రికార్డింగ్‌ని ప్రారంభించండి మరియు ఆపండి.

3. వీడియో రికార్డింగ్

1. Ensure a formatted CFast 2.0 card is inserted and a lens is attached.
2. కెమెరాను ఆన్ చేయండి.
3. Adjust exposure settings (ISO, Shutter Speed, Aperture) using the menu or assigned function buttons.
4. Set desired resolution and frame rate (e.g., 4K @ 160fps) in the menu.
5. Press the red record button on the top of the camera to begin recording. The display will indicate recording status.
6. Press the red record button again to stop recording.

4. Connecting to External Monitor

The E2-M4 supports external monitoring via HDMI. Connect an HDMI cable from the camera's HDMI output port to your monitor's HDMI input. Ensure the monitor is powered on and set to the correct input.

నిర్వహణ

• కెమెరా బాడీని శుభ్రపరచడం: Use a soft, dry, lint-free cloth to wipe the camera body. For stubborn dirt, slightly dampen the cloth with water. Avoid using solvents or abrasive cleaners.
• లెన్స్ మరియు సెన్సార్‌ను శుభ్రపరచడం: For lens elements, use a lens cleaning solution and a microfiber cloth. For sensor cleaning, it is highly recommended to use a professional sensor cleaning kit or seek professional service to avoid damage.
• నిల్వ: When not in use for extended periods, store the camera in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for more than a few weeks.
• ఫర్మ్‌వేర్ నవీకరణలు: Periodically check the Z CAM official website for firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance and access to new features.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

For detailed warranty information, please refer to the warranty card included with your product or visit the official Z CAM website. Z CAM provides technical support and resources to assist with any questions or issues you may encounter.

ఆన్‌లైన్ వనరులు: For the latest firmware, FAQs, and additional support documentation, please visit the official Z CAM support page.

మద్దతును సంప్రదించండి: If you require further assistance, please contact Z CAM customer service through their official channels.