KPS CONFORTLINE CRONO RF Digital Programmable Radio Frequency Thermostat

1. పరిచయం

The KPS CONFORTLINE CRONO RF is a digital programmable thermostat designed for heating or air conditioning systems. It features a wireless communication system between its emitter and receiver units, offering flexible placement and remote temperature control. This manual provides essential information for the safe and efficient operation of your thermostat.

2. భద్రతా సమాచారం

• Installation should only be performed by qualified personnel to prevent electrical hazards.
• ఏదైనా సంస్థాపన లేదా నిర్వహణ పనికి ముందు ప్రధాన విద్యుత్ సరఫరా డిస్‌కనెక్ట్ చేయబడిందని నిర్ధారించుకోండి.
• పరికరాన్ని తీవ్రమైన ఉష్ణోగ్రతలు, తేమ లేదా ప్రత్యక్ష సూర్యకాంతికి బహిర్గతం చేయవద్దు.
• పరికరాన్ని నీరు మరియు ఇతర ద్రవాలకు దూరంగా ఉంచండి.
• Use only the specified battery type for the emitter unit.

3. ప్యాకేజీ విషయాలు

Please check that all components are present in the package:

• 1 x Emitter Unit (Thermostat)
• 1 x రిసీవర్ యూనిట్
• మౌంటు ఉపకరణాలు (స్క్రూలు, వాల్ ప్లగ్‌లు)
• వినియోగదారు మాన్యువల్

గమనిక: 2 AA 1.5V batteries for the emitter unit are చేర్చబడలేదు.

4. సెటప్

4.1. యూనిట్లను మౌంట్ చేయడం

The KPS CONFORTLINE CRONO RF system consists of two main units: an emitter (thermostat) and a receiver. The emitter unit is designed for surface wall mounting, allowing flexible placement within your living space. The receiver unit should be connected to your heating system (boiler) and a 230V mains power supply.

The maximum communication range between the emitter and receiver is 100 meters in open air and over 30 meters inside buildings, thanks to its radio frequency communication.

Figure 1: KPS CONFORTLINE CRONO RF Emitter (left) and Receiver (right) Units.

4.2. Powering the Units

• Emitter Unit: Insert 2 AA 1.5V batteries (not included) into the battery compartment on the back of the emitter unit.
• రిసీవర్ యూనిట్: Connect the receiver unit to a 230V 50/60Hz mains power supply and to your heating system (e.g., gas boiler or electric heating). Wiring requires professional electricians.

మూర్తి 2: వెనుకకు view of the Receiver Unit with wiring terminals. Professional installation is recommended.

4.3. Initial Pairing (if necessary)

The emitter and receiver units are typically pre-paired at the factory. If they do not communicate, refer to the detailed pairing instructions in the full product manual or contact customer support.

5. ఆపరేటింగ్ సూచనలు

The emitter unit features an LCD screen with backlighting and a selection dial for easy navigation and temperature adjustment.

5.1. ప్రదర్శన మరియు నియంత్రణలు

The LCD screen displays ambient temperature, set temperature, time, and current operating mode. Use the selection dial to navigate menus and adjust settings.

5.2. ఆపరేటింగ్ మోడ్‌లు

The thermostat offers multiple operating modes to suit your needs:

• ఆటోమేటిక్ మోడ్: Follows the programmed schedule for temperature control.
• మాన్యువల్ మోడ్: Allows you to set a constant temperature that overrides the schedule until changed.
• తాత్కాలిక మాన్యువల్ మోడ్: Sets a temporary temperature that will revert to the automatic schedule after a set period.
• హాలిడే మోడ్: Maintains a specific temperature for an extended period, ideal for when you are away.

5.3. ప్రోగ్రామింగ్

The thermostat supports configurable programming with 6 daily intervals. Two pre-configured programs are included for quick setup. Refer to the full manual for detailed instructions on customizing your heating schedule.

5.4. ప్రదర్శన సెట్టింగ్‌లు

The thermostat's LCD display is backlit for clear visibility. You can adjust settings related to the display, such as keeping it always on, if desired.

6. నిర్వహణ

• Clean the thermostat's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Replace the emitter unit batteries when the low battery indicator appears on the display.
• Ensure the receiver unit's power connection is secure.

7. ట్రబుల్షూటింగ్

• డిస్ప్లే/పవర్ లేదు: Check batteries in the emitter unit. Ensure the receiver unit is properly connected to the 230V mains supply.
• No Communication (RF): Verify that both units are powered. Ensure they are within the specified communication range. Re-pair the units if necessary (refer to the full manual).
• తప్పు ఉష్ణోగ్రత రీడింగ్: Ensure the emitter unit is not placed near heat sources or in direct sunlight. Calibrate the temperature if an offset is detected (refer to the full manual).
• తాపన వ్యవస్థ స్పందించడం లేదు: Check the wiring connections between the receiver unit and the boiler. Ensure the thermostat is in an active heating mode (e.g., Manual or Automatic with a set temperature above ambient).

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

This KPS product is covered by a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation provided with your purchase or visit the KPS official webసైట్.

For technical support, troubleshooting assistance, or any questions regarding your KPS CONFORTLINE CRONO RF thermostat, please contact KPS customer service through the contact information provided in your product packaging or on the official KPS webసైట్.