Brook Xone SE Adapter Instruction Manual

1. ఉత్పత్తి ముగిసిందిview

The Brook Xone SE Adapter (Type-C Version) is designed to enhance your gaming experience by allowing Xbox One Elite Series 2 and Xbox Series X/S controllers to be used across multiple platforms, including Xbox Series X/S, Nintendo Switch, PlayStation 4, and PC (XID, Steam). This adapter integrates seamlessly, providing features such as motion control, turbo function, button remapping, and audio support.

Figure 1: Brook Xone SE Adapter (Type-C Version) and retail packaging.

మూర్తి 2: ముందు view of the Xone SE Adapter, showing the function buttons and Brook branding.

మూర్తి 3: వైపు view of the Xone SE Adapter, highlighting its compact design.

2. సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps to properly set up your Brook Xone SE Adapter with your controller and gaming console.

2.1 Attaching the Adapter to Your Controller

Ensure your Xbox One Elite Series 2 or Xbox Series X/S controller is powered off.
Align the Type-C connector of the Xone SE Adapter with the USB-C port on your controller.
Gently push the adapter firmly into the controller's port until it is securely seated. Ensure the 3.5mm audio jack on the adapter also aligns with the controller's audio port.

Brook Xone SE Adapter attached to an Xbox controller

Figure 4: The Xone SE Adapter securely attached to an Xbox controller, ready for use.

Video 1: Demonstrates how to ensure the adapter is fully inserted into your controller for proper connection.

2.2 Initial Connection to Consoles/PC

The adapter supports various platforms. The connection method may vary slightly depending on the target system.

నింటెండో స్విచ్:
1. Switch the toggle switch button on the adapter to "NS" mode.
2. Wake up the controller and press and hold the "Bluetooth" button on the Xone SE Adapter for 2 seconds.
3. The LED on the adapter will blink red and blue alternately. Wait for a few seconds until the LED turns blue, indicating a successful connection.
Video 2: Guide on wirelessly connecting the Xone SE Adapter to a Nintendo Switch.
Video 3: Guide on wired connection of the Xone SE Adapter to a Nintendo Switch.
PlayStation 4:
1. Switch the toggle switch button on the adapter to "PS4" mode.
2. Connect the adapter to your PS4 via a USB cable (not included) or follow wireless pairing instructions if applicable.
3. Compatible PS4 games are playable on PS5 consoles. PS5-specific games are not supported.
PC (XID, Steam):
1. Connect the adapter to your PC via a USB cable. The system should recognize it as an XID device.
2. For Steam, ensure your controller settings are configured to recognize the connected device.
Xbox Series X/S & Xbox One:
1. The adapter allows your Xbox controllers to connect to these consoles. Ensure the adapter is properly attached to the controller.

3. ఆపరేటింగ్ సూచనలు మరియు ఫీచర్లు

The Xone SE Adapter provides several advanced functions to enhance your gameplay.

3.1 మోషన్ కంట్రోల్

The adapter supports motion control for PlayStation 4 and Nintendo Switch games, adding an immersive layer to your gaming experience.

Xbox controller with Xone SE Adapter demonstrating motion control

Figure 5: Motion control functionality enabled by the Xone SE Adapter on compatible consoles.

Video 4: Official trailer showcasing the features of the Brook Xone Adapter SE, including motion control.

3.2 Turbo and Remap Functions

The adapter allows for easy setup of Turbo and Remap functions for PS4, Switch, and PC, providing customizable control options.

టర్బో ఫంక్షన్: Press the dedicated Turbo button on the adapter to activate or adjust the turbo speed.
Remap Function: Use the Remap button to reassign controller inputs. Refer to the specific instructions on the Brook website for detailed remapping procedures.
Button Hold Function: This feature allows a button to be held down automatically.

Close-up of Xone SE Adapter buttons for Turbo and Remap

Figure 6: The function buttons on the Xone SE Adapter for activating Turbo and Remap features.

Video 5: Demonstrates how to set up and cancel remap functions on the Xone SE Adapter.

3.3 ఆడియో ఫంక్షన్

The 3.5mm microphone headset jack on the adapter supports audio for PS4 and Xbox One consoles, allowing you to use your preferred headset.

Video 6: Illustrates the use of the simulated touchpad function on the Xone SE Adapter.

3.4 Emulate PS4 Touch Pad

The adapter can emulate the PS4 touchpad via a dedicated Function Key, providing full compatibility with PS4 games.

4. నిర్వహణ

To ensure the longevity and optimal performance of your Xone SE Adapter, please follow these maintenance guidelines:

శుభ్రపరచడం: Use a soft, dry cloth to clean the adapter. Avoid using harsh chemicals or abrasive materials.
నిల్వ: అడాప్టర్‌ను ప్రత్యక్ష సూర్యకాంతి మరియు తీవ్రమైన ఉష్ణోగ్రతలకు దూరంగా చల్లని, పొడి ప్రదేశంలో నిల్వ చేయండి.
నిర్వహణ: అడాప్టర్‌ను జాగ్రత్తగా నిర్వహించండి. దానిని పడవేయడం లేదా బలమైన ప్రభావాలకు గురిచేయకుండా ఉండండి.
ఫర్మ్‌వేర్ నవీకరణలు: Regularly check the official Brook website for firmware updates. Updates can improve compatibility, add new features, and resolve potential issues. It is recommended to update the firmware before initial use.

5. ట్రబుల్షూటింగ్

If you encounter any issues with your Xone SE Adapter, please refer to the following common troubleshooting steps:

సమస్య	సాధ్యమైన కారణం	పరిష్కారం
Adapter not recognized by console/PC.	Incorrect mode selected, loose connection, outdated firmware.	Ensure the toggle switch is set to the correct console mode (NS/PS4). Verify the adapter is fully and securely inserted into the controller. Check for and install the latest firmware from the Brook webసైట్. Try a different USB port or cable if using a wired connection.
Motion control not working or inaccurate.	Not supported on current platform, calibration needed, interference.	Confirm motion control is supported on your specific console (PS4/Switch). Perform a motion control calibration if available (check Brook webసూచనల కోసం సైట్). Ensure no strong magnetic fields or electronic interference are nearby.
Audio not working through headset.	Headset not fully plugged in, incorrect audio settings, not supported on platform.	Ensure the 3.5mm headset jack is fully inserted into the adapter. Verify audio settings on your console/PC are configured for the connected headset. Confirm audio function is supported on your specific console (PS4/Xbox One).
కంట్రోలర్ తరచుగా డిస్‌కనెక్ట్ అవుతుంది.	Low controller battery, wireless interference, adapter not fully seated.	Charge your controller's battery. Minimize wireless interference by moving closer to the console or removing other wireless devices. Re-seat the adapter firmly into the controller. Update adapter firmware.

6. స్పెసిఫికేషన్లు

మోడల్: X one SE Adapter - Type C Version
బ్రాండ్: బ్రూక్
అనుకూల కంట్రోలర్లు: Xbox One Elite Series 2, Xbox Series X/S Controllers
అనుకూల ప్లాట్‌ఫారమ్‌లు: Xbox Series X/S, Nintendo Switch, PlayStation 4, PC (XID, Steam), Xbox One
కనెక్టివిటీ: USB-C (to controller), Wireless (Bluetooth)
ఫీచర్లు: Motion Control (PS4/Switch), Turbo, Remap, Button Hold, Audio Function (3.5mm headset for PS4/Xbox One), PS4 Touchpad Emulation
కొలతలు: 2.36 x 1.77 x 0.79 అంగుళాలు
బరువు: 2.12 ఔన్సులు
రంగు: నలుపు
మూలం దేశం: తైవాన్

7. వారంటీ మరియు మద్దతు

For warranty information, technical support, and the latest firmware updates, please visit the official Brook webసైట్:

Brook Official Webసైట్

You can also refer to the official User Manual PDF provided by the manufacturer for additional details:

యూజర్ మాన్యువల్ (PDF) డౌన్‌లోడ్ చేసుకోండి

	Brook Wingman XB Converter: Connect Xbox, PlayStation, Switch Controllers to Xbox Consoles The Brook Wingman XB Converter allows users to connect various controllers (Xbox, PlayStation, Switch) to Xbox consoles. Features include Turbo function, button remapping, and LED status indicators for easy operation.
	Brook Wingman NS Lite Converter User Guide This guide provides instructions for using the Brook Wingman NS Lite Converter, a wireless controller adapter for Nintendo Switch, Switch OLED, Switch Lite, and PC. It details connection steps, LED indicators, wireless pairing, and advanced features like Turbo and Button Remap settings for various controllers including Xbox, PlayStation, and Switch Pro.
	బ్రూక్ వింగ్మాన్ PS2 కన్వర్టర్ యూజర్ మాన్యువల్ Comprehensive user manual for the Brook Wingman PS2 Converter, detailing connection, LED display, button mapping, turbo function, remapping, and input mode switching for various game consoles and controllers.
	Brook Wingman XE 2 Converter User Guide User guide for the Brook Wingman XE 2, a controller converter adapter compatible with PlayStation, Nintendo Switch, and PC. Learn about setup, firmware updates, Turbo, and Remap functions.
	బ్రూక్ X వన్ అడాప్టర్: Xbox One కంట్రోలర్‌ను PS4, స్విచ్ మరియు PCకి కనెక్ట్ చేయండి బ్రూక్ X వన్ అడాప్టర్ కోసం సమగ్ర గైడ్, ప్లేస్టేషన్ 4, నింటెండో స్విచ్ మరియు PC లలో Xbox One కంట్రోలర్‌లను ఎనేబుల్ చేస్తుంది. సెటప్ సూచనలు, మోడ్ స్విచింగ్, టర్బో కార్యాచరణ, బటన్ రీమ్యాపింగ్ మరియు సాంకేతిక వివరణలను కలిగి ఉంటుంది.
	బ్రూక్ XB ఫైటింగ్ బోర్డ్ యూజర్ గైడ్: కనెక్షన్లు, ఫీచర్లు మరియు కన్సోల్ అనుకూలత బ్రూక్ XB ఫైటింగ్ బోర్డ్ కోసం వివరణాత్మక యూజర్ మాన్యువల్, సెటప్, వైరింగ్, బటన్ ఫంక్షన్లు, టర్బో సెట్టింగ్‌లు, SOCD మోడ్‌లు మరియు Xbox Original, Xbox 360, Xbox One మరియు Xbox సిరీస్ కన్సోల్‌లతో అనుకూలతను కవర్ చేస్తుంది.

Brook X one SE Adapter - Type C Version