Tasmor 76-LED Motion Sensor Cabinet Light User Manual

1. పరిచయం

Thank you for choosing the Tasmor 76-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light. Please read this manual thoroughly before use and retain it for future reference.

2. ఉత్పత్తి ముగిసిందిview

2.1 ముఖ్య లక్షణాలు

• అధిక ప్రకాశం: Equipped with 76 warm white energy-saving LEDs, providing 170 lumens of soft, flicker-free light. Color rendering index (CRI) is over 80.
• మోషన్ సెన్సార్ మోడ్: Features 3 lighting modes (ON/OFF/Auto). In Auto mode, it detects motion within 3 meters (approximately 10 feet) in darkness and automatically turns off after about 18 seconds of no motion. The detection angle is 120°. If ambient brightness is sufficient, the light will not activate.
• USB రీఛార్జిబుల్: Conveniently rechargeable via the included USB cable, eliminating the need for frequent battery replacement.
• సులభమైన సంస్థాపన: Magnetic attachment allows for simple installation and removal. No tools required.
• బహుముఖ అప్లికేషన్: Ideal for kitchens, stairs, cabinets, offices, walls, mirrors, closets, hallways, basements, workshops, garages, or as an emergency light.
• మన్నికైన నిర్మాణం: ది ఎల్amp housing is made of high-quality aluminum alloy, which is rust-proof and easy to clean.

2.2 ప్యాకేజీ విషయాలు

• Tasmor 76-LED Motion Sensor Cabinet Light
• USB ఛార్జింగ్ కేబుల్
• Magnetic Metal Sheets (for adhesive mounting)
• వినియోగదారు మాన్యువల్

Image 2.2.1: The Tasmor 76-LED Motion Sensor Cabinet Light, showing the light bar, USB charging cable, and two magnetic metal sheets for installation.

3. సాంకేతిక లక్షణాలు

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

The Tasmor cabinet light is designed for easy, tool-free installation using its magnetic attachment system.

4.1 సంస్థాపనా దశలు

1. ఉపరితలాన్ని సిద్ధం చేయండి: కావలసిన ఇన్‌స్టాలేషన్ ఉపరితలాన్ని పూర్తిగా శుభ్రం చేసి, అది పొడిగా మరియు దుమ్ము లేదా గ్రీజు లేకుండా ఉండేలా చూసుకోండి.
2. Attach Metal Sheets: Peel off the protective film from the adhesive side of the provided magnetic metal sheets. Firmly press the metal sheets onto the cleaned surface. Ensure they are spaced appropriately for the length of the light bar.
3. మౌంట్ ది లైట్: The light bar has built-in magnets. Simply align the light bar with the installed metal sheets and allow the magnets to secure it in place.

Image 4.1.1: Step-by-step visual guide for installing the light: 1. Cleaning the surface, 2. Attaching the adhesive metal sheet, 3. Magnetically mounting the light bar.

The magnetic attachment allows for easy removal of the light bar for charging or repositioning.

4.2 ఉదాample అప్లికేషన్లు

Image 4.2.1: Lights installed inside a closet for enhanced visibility.

Image 4.2.2: Lights providing illumination in a bedroom wardrobe and above a desk.

5. ఆపరేటింగ్ సూచనలు

The light features a switch to select between three operating modes:

• మోడ్‌లో: కాంతి నిరంతరం వెలుగుతూనే ఉంటుంది.
• ఆఫ్ మోడ్: లైట్ ఆఫ్‌లో ఉంది.
• AUTO Mode (Motion Sensor): The light will automatically turn on when motion is detected in a dark environment. It will turn off approximately 18 seconds after motion ceases. The detection range is up to 3 meters (10 feet) with a 120° angle. The sensor will not activate if the ambient light is sufficient.

Image 5.1.1: The light operating in Auto mode, detecting motion within a 120° angle in a kitchen environment.

6. పరికరాన్ని ఛార్జ్ చేస్తోంది

The Tasmor cabinet light is equipped with a rechargeable battery. When the battery is low, the light output may diminish or cease. To charge:

1. Remove the light bar from its magnetic mounting.
2. Connect the included USB charging cable to the charging port on the light bar.
3. Connect the other end of the USB cable to a standard USB power source (e.g., USB adapter, power bank, computer USB port).
4. An indicator light will show the charging status: typically red for charging and blue for fully charged.

Image 6.1.1: Close-up of the light bar showing the USB charging port and indicator lights for 'Recharging' (red) and 'Fully Charged' (blue).

7. సంరక్షణ మరియు నిర్వహణ

• శుభ్రపరచడం: Use a soft, dry cloth to wipe the surface of the light. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the electronic components. Do not use abrasive cleaners or solvents.
• నిల్వ: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.
• పర్యావరణం: Avoid exposing the light to extreme temperatures, direct sunlight, or high humidity.

8. ట్రబుల్షూటింగ్ గైడ్

9. వారంటీ మరియు కస్టమర్ మద్దతు

Information regarding specific warranty terms and conditions for this product is not available in the provided data. For warranty claims, technical support, or any other inquiries, please contact Tasmor customer service through your purchase platform or the official Tasmor webసైట్.