1. ఉత్పత్తి ముగిసిందిview
The JBC Tools CD-2SQF is a high-performance digital soldering station designed for professional use. It offers precise temperature control and rapid heat-up, making it suitable for a wide range of soldering applications. This manual provides essential information for the safe and efficient operation of your soldering station.
మూర్తి 1: JBC Tools CD-2SQF Digital Soldering Station. This image shows the compact soldering station with its integrated stand, cleaning accessories (brass wool and sponge), and the connected T210 soldering iron. The station features a digital display showing temperature and power, along with control buttons.
ప్యాకేజీ విషయాలు:
- CD కంట్రోల్ యూనిట్
- T210 Soldering Iron (tip not included)
- CL6210 ఇత్తడి ఉన్ని
- S0354 స్పాంజ్
- పవర్ ప్లగ్
- వినియోగదారు మాన్యువల్
2. సెటప్ సూచనలు
అన్ప్యాకింగ్: Carefully remove all components from the packaging. Inspect for any signs of damage during transit. Retain packaging for future storage or transport.
ప్లేస్మెంట్: Place the CD-2SQF control unit on a stable, level, and heat-resistant surface. Ensure adequate ventilation around the unit.
Connect Soldering Iron: Connect the T210 soldering iron cable to the designated port on the front of the CD control unit. Ensure the connection is secure.
Prepare Cleaning Station:
- Insert the CL6210 brass wool into its designated compartment on the station.
- Moisten the S0354 sponge with clean water and place it in its compartment. The sponge should be damp, తడి నానబెట్టడం లేదు.
పవర్ కనెక్షన్: Connect the power plug to the power input on the rear of the CD control unit. Then, plug the power cord into a grounded electrical outlet (230V AC, 50/60Hz).
ప్రారంభ పవర్ ఆన్: Press the power button on the unit. The LED display will illuminate, indicating the station is ready for operation.
3. Operating the Soldering Station
3.1. ప్రాథమిక ఆపరేషన్
పవర్ ఆన్/ఆఫ్: Press the power button to turn the station on or off. The display will show the current temperature and power status.
ఉష్ణోగ్రత సర్దుబాటు: ఉపయోగించండి UP మరియు డౌన్ arrow buttons on the control unit to adjust the desired soldering temperature. The temperature range is 90-450 °C.
చిట్కా శుభ్రపరచడం: Regularly clean the soldering iron tip using the brass wool or the damp sponge. This removes excess solder and oxidation, ensuring optimal performance and tip longevity.
టంకం: Apply the soldering iron tip to the joint to be soldered, then feed solder onto the heated joint. Ensure proper wetting and flow of the solder.
స్టాండ్బై మోడ్: When the soldering iron is placed in its stand, the station automatically enters standby mode, reducing the tip temperature to prolong its life and save energy.
3.2. Advanced Features (Refer to full manual for details)
- మెను నావిగేషన్: ఉపయోగించండి మెనూ button to access advanced settings such as temperature presets, sleep mode settings, and unit calibration.
- పిన్ రక్షణ: The station may feature a PIN protection option to prevent unauthorized temperature changes.
- ఫర్మ్వేర్ నవీకరణలు: JBC may release firmware updates for enhanced functionality. Consult the official JBC webసూచనల కోసం సైట్.
4. నిర్వహణ మరియు సంరక్షణ
Regular maintenance ensures the longevity and optimal performance of your JBC CD-2SQF soldering station.
చిట్కా నిర్వహణ: Always tin the soldering iron tip with a small amount of solder before storing it or turning off the station. This prevents oxidation.
Cleaning the Station:
- Wipe the control unit and stand with a soft, damp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
- Periodically replace the brass wool and sponge as they wear out or become excessively dirty.
కేబుల్ తనిఖీ: Regularly inspect the soldering iron cable and power cord for any signs of damage, fraying, or kinks. Replace damaged cables immediately.
నిల్వ: When not in use for extended periods, disconnect the station from power and store it in a clean, dry environment.
5. ట్రబుల్షూటింగ్
This section addresses common issues you might encounter with your soldering station.
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| స్టేషన్ పవర్ ఆన్ చేయడం లేదు. | విద్యుత్ సరఫరా లేదు; చెడిపోయిన విద్యుత్ తీగ; అంతర్గత ఫ్యూజ్ పేలిపోయింది. | Check power connection and outlet. Inspect power cord for damage. If fuse is suspected, contact authorized service. |
| టంకం ఇనుము వేడెక్కడం లేదు. | Soldering iron not properly connected; faulty heating element/tip; station in standby/sleep mode. | Ensure iron is securely connected. Check if the station is in standby (remove iron from stand). Replace tip if necessary. Contact service if problem persists. |
| ఉష్ణోగ్రత ప్రదర్శన లోపాన్ని చూపుతుంది. | Sensor malfunction; connection issue. | Turn off and restart the station. Check iron connection. If error persists, contact JBC support. |
| Poor solder joint quality. | Incorrect temperature; dirty/oxidized tip; improper soldering technique. | Adjust temperature. Clean and tin the tip. Review soldering technique. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact JBC customer support or an authorized service center.
6. సాంకేతిక లక్షణాలు
| మోడల్ | CD-2SQF |
| బ్రాండ్ | JBC |
| శక్తి | 40 వాట్స్ |
| వాల్యూమ్tage | 230 వోల్ట్లు |
| ఉష్ణోగ్రత పరిధి | 90 - 450 °C (194 - 842 °F) |
| ఉష్ణోగ్రత స్థిరత్వం | ± 1.5 ° C (± 3 ° F) |
| కొలతలు (L x W x H) | 11 x 19 x 15 సెం.మీ (4.3 x 7.5 x 5.9 అంగుళాలు) |
| బరువు | 3.51 కిలోలు (7.74 పౌండ్లు) |
| ప్రదర్శన రకం | LED |
| మెటీరియల్ | ప్లాస్టిక్ |
7. వారంటీ మరియు మద్దతు
JBC products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official JBC webసైట్ లేదా మీ స్థానిక పంపిణీదారుని సంప్రదించండి.
ఆన్లైన్ వనరులు: www.jbctools.com
కస్టమర్ సేవ: Refer to the contact information provided on the JBC webమీ ప్రాంతం కోసం సైట్.
