1. ఉత్పత్తి ముగిసిందిview
The One Control Crocodile Tail Loop Wing (OC10W) is an advanced programmable 10-channel loop switcher designed to optimize your guitar effects setup. It integrates user feedback and technical advancements to provide flexible signal routing, comprehensive MIDI control, and convenient remote programming via Bluetooth.
మూర్తి 1: ముందు view of the One Control Crocodile Tail Loop Wing (OC10W), showing the display, footswitches, and input/output jacks.
2. సెటప్ గైడ్
2.1. పవర్ కనెక్షన్
Connect a standard 9V DC power supply (not included) to the 9V DC input jack on the rear panel of the OC10W. Ensure the power supply meets the required specifications (9V, 150mA minimum).
2.2. ఆడియో కనెక్షన్లు
- Connect your guitar or instrument to the ఇన్పుట్ జాక్.
- కనెక్ట్ చేయండి అవుట్ 1 or అవుట్ 2 జాక్ మీకు ampలైఫైయర్ ఇన్పుట్.
- For each effect pedal, connect the pedal's input to a పంపండి jack (e.g., SEND1) and the pedal's output to the corresponding తిరిగి వెళ్ళు jack (e.g., RETURN1). The OC10W features seven serial mono loops (SEND1-7/RETURN1-7) and three parallel loops (SEND8-10/RETURN8-10).
- ది ట్యూనర్ output can be connected to a dedicated tuner pedal. This output features a mute switch for silent tuning.
చిత్రం 2: వెనుక view of the OC10W, illustrating the various input, output, send, and return jacks for audio connections.
2.3. MIDI కనెక్షన్లు
Use standard MIDI cables to connect the MIDI IN మరియు మిడి అవుట్ jacks to other MIDI-compatible devices for comprehensive control and synchronization.
2.4. Bluetooth Pairing (Winglink App)
The OC10W can be controlled and programmed remotely via the Winglink iOS app. Ensure Bluetooth is enabled on your iOS device and follow the app's instructions to pair with the OC10W. Look for the Winglink logo on the device.
Figure 3: Close-up of the Winglink logo, indicating Bluetooth connectivity for the iOS app.
3. ఆపరేషన్
3.1. ఆపరేషన్ మోడ్లు
The OC10W supports two primary modes of operation:
- ప్రోగ్రామ్ మోడ్: Allows you to store and recall complex effect pedal combinations and MIDI commands as presets. The OC10W offers 168 MIDI presets.
- మాన్యువల్ మోడ్: Enables direct control over individual loops via the footswitches, allowing you to turn effects on and off instantly without recalling a preset.
3.2. Footswitch Functions
The OC10W features multiple footswitches for versatile control:
- PROGRAM / LOOP Footswitches (1-7): In Program Mode, these recall specific presets. In Manual Mode, they activate/deactivate the corresponding effect loops.
- BANK+ / LOOP8 Footswitch: Used to increment banks in Program Mode or control Loop 8 in Manual Mode.
- MUTE / LOOP9 Footswitch: Mutes the output for silent tuning or controls Loop 9.
- FS3 / MULTI JACK Footswitch: Controls external devices via the FS3 jack or acts as a multi-function switch.
- FS1, FS2, SLV: Additional footswitches for various control functions, often configurable.
మూర్తి 4: క్లోజ్-అప్ view of the OC10W's footswitch section, including the main program/loop switches and control switches.
3.3. Display and Indicators
The central display shows the current bank/index, program number, or custom name. LED indicators provide visual feedback on active loops, MIDI status, and other functions.
Figure 5: Close-up of the OC10W's digital display, showing a typical preset indication.
4. నిర్వహణ
To ensure the longevity and optimal performance of your One Control Crocodile Tail Loop Wing, follow these maintenance guidelines:
- శుభ్రపరచడం: Use a soft, dry cloth to wipe down the unit. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish and internal components.
- నిల్వ: ప్రత్యక్ష సూర్యకాంతి, విపరీతమైన ఉష్ణోగ్రతలు మరియు అధిక తేమ నుండి దూరంగా చల్లని, పొడి ప్రదేశంలో యూనిట్ను నిల్వ చేయండి.
- కనెక్షన్లు: Periodically check all cable connections (audio, MIDI, power) to ensure they are secure and free from damage. Loose connections can lead to signal loss or intermittent operation.
- ఫుట్ స్విచ్లు: While designed for durability, avoid excessive force when operating the footswitches.
5. ట్రబుల్షూటింగ్
If you encounter issues with your OC10W, refer to the following common problems and solutions:
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| ఏ పవర్/యూనిట్ ఆన్ కావడం లేదు | Incorrect power supply; Loose power connection; Faulty power supply | Ensure a 9V DC power supply is correctly connected. Verify power supply functionality. |
| No sound/Signal loss | Incorrect audio connections; Faulty cables; Loop not active; Tuner mute engaged | Check all input, output, send, and return cables. Ensure the correct loops are active. Disengage tuner mute if active. |
| MIDI control not working | Incorrect MIDI connections; MIDI channel mismatch; Incorrect MIDI settings | Verify MIDI In/Out connections. Ensure MIDI channels match between devices. Check MIDI settings in the OC10W and connected devices. |
| బ్లూటూత్ కనెక్షన్ సమస్యలు | Bluetooth off on device; App issues; Interference | Ensure Bluetooth is enabled on your iOS device. Restart the Winglink app and the OC10W. Try pairing again. |
6. సాంకేతిక లక్షణాలు
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| మోడల్ | Crocodile Tail Loop Wing (OC10W) |
| ప్రభావ రకం | Programmable 10-Channel Loop Switcher |
| ఉచ్చులు | 7x Serial Mono Loops, 3x Parallel Loops |
| Buffer Circuit | BJF Buffer (switchable) |
| బైపాస్ రకం | True Bypass (when buffer is off) |
| ప్రీసెట్లు | 168 MIDI Presets |
| నియంత్రణ | Footswitches, Full MIDI Control, Bluetooth (Winglink iOS app) |
| అదనపు ఫీచర్లు | Tuner Out with Mute Switch, 3x FS Connectors (TRS), 8-pin DIN plug |
| శక్తి మూలం | కార్డెడ్ ఎలక్ట్రిక్ |
| వాల్యూమ్tage | 9 వోల్ట్లు |
| Ampఎరేజ్ | 150 మిల్లీamps |
| కొలతలు (L x W x H) | 46.5 x 12 x 8.5 సెం.మీ |
| వస్తువు బరువు | 1.6 కిలోలు |
| హార్డ్వేర్ ఇంటర్ఫేస్ | బ్లూటూత్ |
| సిగ్నల్ ఫార్మాట్ | అనలాగ్ |
7. వారంటీ మరియు మద్దతు
One Control products are manufactured to high standards. For warranty information, technical support, or service inquiries, please contact One Control customer service or visit their official webవారంటీ క్లెయిమ్ల కోసం దయచేసి మీ కొనుగోలు రుజువును మీ వద్ద ఉంచుకోండి.
తయారీదారు: ఒక నియంత్రణ
