రాంకో ETC-141000-000 డిజిటల్ టెంపరేచర్ ఎలక్ట్రానిక్ కంట్రోలర్ యూజర్ మాన్యువల్

1. పరిచయం

The Ranco ETC Series Electronic Temperature Control, model ETC-141000-000, is designed as a full-featured electronic replacement for electro-mechanical temperature controls commonly used in commercial refrigeration applications. This controller offers significant application flexibility due to its wide temperature range, single and two-stage capability, selectable heating/cooling modes, and multi-voltage input (120/208/240V AC).

2. ముఖ్యమైన భద్రతా సమాచారం

• Always disconnect power to the unit before installation, servicing, or maintenance to prevent electrical shock.
• Installation should be performed by a qualified technician in accordance with all local and national electrical codes.
• విద్యుత్ సరఫరా వాల్యూమ్ నిర్ధారించుకోండిtage matches the controller's specifications (120/208/240V AC).
• Do not operate the controller with damaged wiring or if the enclosure is compromised.
• The sensor is rated IP67 for dust and water protection; however, ensure proper sealing and protection for all electrical connections.

3. ఉత్పత్తి ముగిసిందిview మరియు ఫీచర్లు

The Ranco ETC-141000-000 controller provides precise temperature management with a user-friendly interface and robust design. Key features include:

• విస్తృత ఉష్ణోగ్రత పరిధి: -30°F నుండి 220°F (-34.4°C నుండి 104.4°C) వరకు పనిచేస్తుంది.
• Adjustable Differential: Allows setting a differential from 1°F to 30°F (-17°C to -1°C).
• LCD Read-out: Displays sensor temperature, control settings, and relay status with a white backlight.
• అధిక Amp అవుట్‌పుట్ రిలే: సింగిల్ ఎస్tagఇ తో 16 Amps @ 120V AC and 8 Amps @ 208/240V AC.
• EEPROM Memory: Retains all control settings during power outages.
• కీప్యాడ్ లాకౌట్: Prevents unauthorized alteration of settings.
• Sensor Lead: Includes an 8-foot lead, extendable up to 400 feet using 18 or 22-gauge thermostat wire.
• Easy 4-Step Set-up: Simplifies initial configuration.
• Heavy-Duty Relay: 1 HP rated for demanding applications.
• Selectable Modes: Choose between Fahrenheit or Celsius, and heating or cooling modes.
• ఎన్‌క్లోజర్: Available in NEMA 1 case and NEMA 4X models for outdoor use.

Image showing the Ranco ETC-141000-000 Digital Temperature Electronic Controller, its retail packaging, and the included instruction sheet. The packaging displays the UPC 00686608004413 and model number ETC-141000.

The UPC for this product is 00686608004413.

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

4.1 మౌంటు

Mount the controller in a location that is easily accessible for viewing and adjustments, away from direct heat sources or excessive vibration. Ensure the chosen location is appropriate for the controller's enclosure type (NEMA 1 for indoor use, NEMA 4X for outdoor or wash-down environments). Use appropriate fasteners to secure the unit firmly.

4.2. వైరింగ్

All wiring must comply with local and national electrical codes. It is recommended that a qualified electrician perform the installation.

1. పవర్ డిస్‌కనెక్ట్ చేయండి: Ensure all power to the circuit is disconnected before beginning any wiring.
2. పవర్ ఇన్‌పుట్: Connect the appropriate line voltage (120V, 208V, or 240V AC) to the designated power input terminals on the controller.
3. Load Output: Connect the controlled device (e.g., compressor, heater) to the output relay terminals. Observe the maximum current ratings (16 Amps @ 120V AC, 8 Amps @ 208/240V AC).
4. సెన్సార్ కనెక్షన్: Connect the temperature sensor lead to the sensor input terminals. The 8-foot sensor lead can be extended up to 400 feet using 18 or 22-gauge thermostat wire. Ensure all connections are secure and properly insulated.
5. గ్రౌండింగ్: Properly ground the controller according to electrical codes.

క్లోజ్-అప్ view of the Ranco ETC-141000-000 Digital Temperature Electronic Controller, highlighting the digital display, control buttons (SET, Up, Down), and the NEMA 4X outdoor enclosure rating. The temperature sensor is also visible.

5. ఆపరేటింగ్ సూచనలు

The ETC-141000-000 features an intuitive interface for setting and monitoring temperature.

5.1. Initial Power-Up and Basic Settings

Upon initial power-up, the controller will perform a self-test. Follow the easy 4-step set-up process outlined in the quick start guide (typically included with the product) to configure basic parameters.

5.2. Setting Temperature (Setpoint)

1. నొక్కండి సెట్ button once. The current setpoint will flash on the display.
2. ఉపయోగించండి UP or డౌన్ arrow buttons to adjust the setpoint to the desired temperature.
3. నొక్కండి సెట్ button again to confirm and save the new setpoint, or wait a few seconds for it to automatically save and return to normal operation.

5.3. Selecting Heating/Cooling Mode

The controller can operate in either heating or cooling mode. Refer to the detailed programming instructions in the full manual for specific steps to switch between these modes. This setting determines whether the output relay activates when the temperature rises above or falls below the setpoint.

5.4. Differential Adjustment

The differential (also known as hysteresis) prevents rapid cycling of the controlled device. To adjust the differential (range 1°F to 30°F):

1. Access the advanced programming menu (refer to the full manual for specific button combinations).
2. Navigate to the differential setting parameter.
3. ఉపయోగించండి UP or డౌన్ arrow buttons to set the desired differential value.
4. Save the setting and exit the programming menu.

5.5. కీప్యాడ్ లాక్అవుట్

To prevent unauthorized changes to settings, the keypad can be locked. Consult the full instruction manual for the specific procedure to enable and disable the keypad lockout feature.

6. నిర్వహణ

The Ranco ETC-141000-000 is designed for reliable operation with minimal maintenance.

• శుభ్రపరచడం: Periodically wipe the controller's exterior with a soft, damp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
• సెన్సార్ తనిఖీ: Regularly inspect the temperature sensor and its lead for any signs of damage or corrosion. Ensure the sensor is properly positioned for accurate temperature readings. The sensor is IP67 rated, but physical damage can compromise its integrity.
• కనెక్షన్ తనిఖీలు: Annually, or as needed, verify that all electrical connections are tight and free from corrosion.

7. ట్రబుల్షూటింగ్

If you encounter issues with your Ranco ETC-141000-000 controller, refer to the following common troubleshooting steps:

• పవర్ లేదు/డిస్ప్లే ఆఫ్: Check the power supply to the controller. Ensure circuit breakers are not tripped and wiring connections are secure.
• తప్పు ఉష్ణోగ్రత రీడింగ్: Verify the sensor is properly connected and positioned. Check for any physical damage to the sensor or its lead.
• అవుట్‌పుట్ సక్రియం కావడం లేదు: Confirm the setpoint and differential settings are correct for the desired operation (heating/cooling). Check the relay status on the LCD. Ensure the load device is functioning correctly.
• కీప్యాడ్ స్పందించడం లేదు: Check if the keypad lockout feature is enabled. Refer to the operating instructions to disable it if necessary.
• అస్తవ్యస్త ప్రవర్తన: Disconnect power for a few minutes and then reapply to reset the unit. If issues persist, contact Ranco technical support.

8. సాంకేతిక లక్షణాలు

9. వారంటీ మరియు మద్దతు

For warranty information, technical support, or service inquiries regarding your Ranco ETC-141000-000 Digital Temperature Electronic Controller, please contact Ranco customer service or visit their official website. Keep your purchase receipt and model number handy when contacting support.