1. పరిచయం
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your ROKR 3D Wooden Ballista Launcher Model Kit. This kit is designed to offer an engaging and educational building experience, culminating in a functional mechanical model.
Figure 1: Fully assembled ROKR 3D Wooden Ballista Launcher Model Kit.
2. భద్రతా సమాచారం
- ఉక్కిరిబిక్కిరి చేసే ప్రమాదం: Small parts are included. Not suitable for children under 3 years.
- Projectile Safety: The ballista launches projectiles. DO NOT AIM AT FACE OR EYES. Always ensure a clear and safe firing area.
- మెటీరియల్ హ్యాండ్లింగ్: Wooden pieces may have sharp edges or splinters. Handle with care during assembly. Sandpaper is provided to smooth edges if necessary.
- నిల్వ: Keep the product away from sources of ignition and do not soak it in water.
3. ప్యాకేజీ విషయాలు
Verify that all components listed below are present in your kit before beginning assembly.
చిత్రం 2: పైగాview of the kit's contents, including wooden sheets, manual, and accessories.
- Pre-cut wooden sheets (multiple boards)
- రబ్బరు బ్యాండ్లు
- ఇసుక అట్ట
- ఇన్స్ట్రక్షన్ మాన్యువల్
- 3 Wooden Projectiles
4. అసెంబ్లీ సూచనలు
Follow the step-by-step diagrams and instructions provided in the included manual. The assembly process involves connecting pieces using a tenon and mortise structure. Precise laser-cut pieces are designed for a snug fit.
- ఇన్స్ట్రక్షన్ మాన్యువల్ చదవండి: ప్రారంభించడానికి ముందు మొత్తం అసెంబ్లీ ప్రక్రియతో మిమ్మల్ని మీరు పరిచయం చేసుకోండి.
- భాగాలను గుర్తించండి: Carefully pop out the pre-cut parts from the wooden sheets. Each part is typically labeled in the manual for easy identification.
- భాగాలను సమీకరించండి: Follow the numbered steps in the manual to connect parts. Pay close attention to the orientation and fit of each piece. Some smaller parts may require gentle force or the use of the provided tool to fit correctly.
- లూబ్రికేషన్ (ఐచ్ఛికం): For smoother operation of moving parts, a small amount of wax (not always included, common household wax can be used) can be applied to connecting points as indicated in the manual.
Figure 3: Visual guide for initial assembly steps, including reading instructions, taking out parts, and assembling.
Figure 4: Close-up of hands assembling the wooden puzzle pieces.
అసెంబ్లీ వీడియో గైడ్
Video 1: An official ROKR video demonstrating the assembly process of the 3D Wooden Ballista Launcher Model Kit.
5. ఆపరేటింగ్ సూచనలు
Once assembled, your ROKR Ballista Launcher is ready for operation. Ensure you are in a safe environment before firing.
- సర్దుబాటు కోణం: Turn the lifting gears on the side to adjust the launch angle between 90° and 135°.
- తిరిగే టరెట్: The base features a 360° rotatable turret, allowing you to aim in any direction.
- Loading Projectile: Place one of the wooden projectiles into the firing mechanism.
- కాల్పులు: Pull back the firing trigger mechanism and release to launch the projectile. Projectiles can travel up to 10 feet.
Figure 5: Key operational features: Firing Trigger, Ratchet Lifting Mechanism, and Rotatable Turret.
ఆపరేషన్ వీడియో గైడ్
Video 2: An official ROKR video demonstrating the mechanical operation of the ballista, including loading and firing.
6. నిర్వహణ
- శుభ్రపరచడం: Use a clean and soft fabric to clean the product. Do not use corrosive solvents such as alcohol, ammonium hydroxide, or other harsh cleaning agents.
- మృదువైన అంచులు: If any part edges become rough over time, polish them with sandpaper.
- నిల్వ: Store the model in a dry environment, away from direct sunlight and extreme temperatures, to prevent warping or damage to the wood.
7. ట్రబుల్షూటింగ్
- సరిపోని భాగాలు: Ensure you are using the correct parts for each step. Refer to the manual's diagrams and part labels. Gentle sanding with the provided sandpaper can help if a fit is too tight.
- పెళుసైన భాగాలు: Some wooden details can be delicate. If a part breaks, check for spare pieces in the kit. The design often allows for some flexibility in reassembly if a minor mistake occurs.
- Mechanism Not Smooth: Apply a small amount of wax to the gears and moving joints to reduce friction and improve operation.
- Weak Launch: Ensure the rubber bands are correctly installed and taut. Additional rubber bands can be added for increased power if desired.
8. స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| ఉత్పత్తి కొలతలు | 11.9 x 9 x 0.01 inches (assembled size approximately 11.9 x 9 x 6.5 inches) |
| వస్తువు బరువు | 1.17 పౌండ్లు |
| సిఫార్సు చేసిన వయస్సు | 14 సంవత్సరాలు మరియు అంతకంటే ఎక్కువ |
| ముక్కల సంఖ్య | 142 (Self-Assemble) |
| మెటీరియల్ | High-quality wood (plywood) |
| Launch Range | 10 అడుగుల వరకు |
| సర్దుబాటు కోణం | 90° - 135° |
| టరెట్ రొటేషన్ | 360° |
చిత్రం 6: అసెంబుల్ చేయబడిన మోడల్ యొక్క కొలతలు యొక్క దృశ్యమాన ప్రాతినిధ్యం.
9. వారంటీ & సపోర్ట్
For any questions, missing parts, or support needs regarding your ROKR 3D Wooden Ballista Launcher Model Kit, please contact ROKR customer service at service@robotime.com. Please provide your model number and a detailed description of your inquiry for efficient assistance.
