Value VRR24M-C Refrigerant Recovery Unit User Manual

ఉత్పత్తి ముగిసిందిview

The Value VRR24M-C is a compact and efficient refrigerant recovery unit designed for professional use. It is suitable for recovering various types of refrigerants, including R12, R134a, R407c, R22, R410a, R32, and R1234yf, among others. Its robust design and user-friendly features make it an essential tool for HVAC/R technicians.

Image: The Value VRR24M-C Refrigerant Recovery Unit, showcasing its compact design, control panel with gauges, and connection ports. The unit features a sturdy handle for portability and a ventilation grille on the side.

ముఖ్య లక్షణాలు:

• Designed for fast refrigerant recovery.
• Handy and compact size for easy transport and storage.
• Equipped with high and low-pressure gauges for precise monitoring.
• Manual reset function for operational safety.
• Simple operation knob for ease of use.
• Air-cooled, oil-free, and maintenance-free piston compressor.
• Automatic shutdown feature for safety.

భద్రతా సమాచారం

Always read and understand all safety warnings and instructions before operating the VRR24M-C unit. Failure to do so may result in serious injury or equipment damage.

• వ్యక్తిగత రక్షణ పరికరాలు (PPE): Always wear appropriate PPE, including safety glasses, gloves, and protective clothing, when handling refrigerants.
• వెంటిలేషన్: Operate the unit in a well-ventilated area to prevent the accumulation of refrigerant vapors, which can displace oxygen and cause asphyxiation.
• విద్యుత్ భద్రత: Ensure the power supply matches the unit's requirements (230V/50Hz). Do not operate with damaged cords or plugs. Avoid operating in wet conditions.
• శీతలకరణి నిర్వహణ: Be aware of the specific properties of the refrigerant being recovered. Some refrigerants are flammable or toxic.
• పీడన భద్రత: Do not exceed the maximum operating pressures. The unit features an automatic shutdown at 38.5 bar (558 psi).
• సిలిండర్లు: Use only approved recovery cylinders. Do not overfill recovery cylinders.
• నిర్వహణ: ఏదైనా నిర్వహణ లేదా శుభ్రపరిచే ముందు విద్యుత్తును డిస్‌కనెక్ట్ చేయండి.

సెటప్

1. అన్‌ప్యాకింగ్: Carefully remove the VRR24M-C unit from its packaging. Inspect for any shipping damage.
2. ప్లేస్‌మెంట్: Place the unit on a stable, level surface in a well-ventilated area, away from direct sunlight or heat sources.
3. పవర్ కనెక్షన్: Connect the power cord to a grounded 230V/50Hz electrical outlet. Ensure the power switch on the unit is in the "OFF" position before connecting.
4. గొట్టం కనెక్షన్లు:
   • Connect the appropriate hoses from the system to be recovered to the "IN" port of the recovery unit.
   • Connect a hose from the "OUT" port of the recovery unit to the recovery cylinder.
   • లీకేజీలను నివారించడానికి అన్ని కనెక్షన్లు గట్టిగా ఉన్నాయని నిర్ధారించుకోండి.
5. Cylinder Preparation: Ensure the recovery cylinder is empty and has sufficient capacity for the refrigerant being recovered. Weigh the cylinder before and during recovery to prevent overfilling.

ఆపరేటింగ్ సూచనలు

The VRR24M-C unit offers different recovery modes for optimal performance.

General Operation Steps:

1. Ensure all hoses are correctly connected and valves are in the appropriate positions (refer to your system's specific recovery procedure).
2. ప్రధాన పవర్ స్విచ్‌ను "ఆన్" స్థానానికి మార్చండి.
3. Select the desired recovery mode using the operation knob (e.g., Gas, Liquid, Push/Pull).
4. Monitor the high and low-pressure gauges during the recovery process.
5. The unit will automatically shut off if the pressure exceeds 38.5 bar (558 psi).
6. Once recovery is complete, or the system pressure reaches the desired vacuum level, turn off the unit and close all valves.
7. Disconnect hoses carefully, being mindful of any residual pressure.

Recovery Efficiency (Approximate):

Note: Recovery efficiency may vary based on ambient temperature, system conditions, and refrigerant type.

నిర్వహణ

Regular maintenance ensures the longevity and optimal performance of your VRR24M-C unit.

• శుభ్రపరచడం: Keep the unit clean and free of dust and debris. Wipe the exterior with a damp గుడ్డ. కఠినమైన రసాయనాలను ఉపయోగించవద్దు.
• గొట్టం తనిఖీ: Regularly inspect hoses and fittings for wear, cracks, or leaks. Replace damaged components immediately.
• ఫిల్టర్ నిర్వహణ: If applicable, check and clean or replace any internal filters according to the manufacturer's recommendations (no specific filter mentioned in data, so keep general).
• నిల్వ: When not in use, store the unit in a dry, cool place, protected from extreme temperatures and direct sunlight.
• కంప్రెసర్: The unit features an oil-free and maintenance-free piston compressor, reducing routine maintenance needs for this component.

ట్రబుల్షూటింగ్

ఈ విభాగం సాధారణ కార్యాచరణ సమస్యలకు పరిష్కారాలను అందిస్తుంది. ఇక్కడ జాబితా చేయని సమస్యల కోసం, అర్హత కలిగిన సేవా సిబ్బందిని సంప్రదించండి.

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

Specific warranty details are not provided in the product information. Please refer to your purchase documentation or contact the retailer/manufacturer for warranty terms and conditions.

For technical support or service inquiries, please contact Value customer service or your authorized dealer.