True Manufacturing GDM-72-HC~TSL01 Glass Door Merchandiser Instruction Manual

1. ఉత్పత్తి ముగిసిందిview

The True Manufacturing GDM-72-HC~TSL01 is a commercial glass door merchandiser designed for displaying and refrigerating packaged food and beverages. This unit features an oversized refrigeration system for optimal product temperatures and energy efficiency. It is constructed with high-quality materials for durability and an attractive presentation.

ముఖ్య లక్షణాలు ఉన్నాయి:

• High capacity, factory balanced refrigeration system.
• ఉష్ణోగ్రత పరిధి: 33°F నుండి 38°F (0.5°C నుండి 3.3°C).
• Non-peel or chip black powder coated cold rolled steel exterior.
• White aluminum interior with stainless steel floor.
• Double pane thermal insulated glass sliding doors.
• Adjustable heavy-duty PVC coated wire shelves.
• LED interior lighting for enhanced product visibility.
• Easily accessible condenser coil for cleaning.

మూర్తి 1: ముందు view of the True Manufacturing GDM-72-HC~TSL01 Glass Door Merchandiser.

2. సెటప్ మరియు ఇన్‌స్టాలేషన్

2.1 అన్‌ప్యాకింగ్

Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and your dealer. Retain all packaging materials for inspection.

2.2 ప్లేస్‌మెంట్

This unit is designed for freestanding installation. Ensure the merchandiser is placed on a level, sturdy surface capable of supporting its weight when fully loaded. Allow adequate clearance around the unit for proper ventilation and maintenance. The product dimensions are approximately 28.88 x 78.13 x 78.63 inches (W x D x H).

2.3 ఎలక్ట్రికల్ కనెక్షన్

The merchandiser requires a dedicated 115/60/1 electrical supply with a NEMA-5-15R receptacle. Ensure the electrical supply matches the unit's requirements and that a qualified electrician performs the connection if necessary. Do not use extension cords.

2.4 షెల్వింగ్ ఇన్‌స్టాలేషన్

The unit comes with adjustable heavy-duty PVC coated wire shelves. Install the shelves by placing them on the shelf clips provided. Adjust the shelf height as needed to accommodate various product sizes. Ensure shelves are level and securely seated.

2.5 డోర్ ఆపరేషన్

The merchandiser features double pane thermal insulated glass sliding doors. Ensure the doors slide smoothly and seal properly when closed to maintain optimal internal temperature.

3. ఆపరేటింగ్ సూచనలు

3.1 ప్రారంభ ప్రారంభ

After connecting the unit to power, allow it to run for several hours to reach the desired operating temperature before loading products. The factory-set temperature range is typically 33°F to 38°F (0.5°C to 3.3°C).

3.2 ఉష్ణోగ్రత నియంత్రణ

The merchandiser is equipped with a temperature control system. Refer to the control panel for specific instructions on adjusting the temperature settings. Maintain the recommended temperature range for optimal product preservation.

3.3 Loading Product

Load products evenly on the shelves. Do not block the internal air vents, as this can impede airflow and affect cooling performance. Avoid overloading shelves to prevent damage and ensure proper air circulation.

3.4 Interior Lighting

The unit features LED interior lighting to illuminate products. The lighting can typically be controlled via a switch, allowing for enhanced product visibility.

4. నిర్వహణ

Regular maintenance ensures the longevity and efficient operation of your merchandiser.

4.1 బాహ్య మరియు లోపలి భాగాన్ని శుభ్రపరచడం

• బాహ్య: Clean the exterior surfaces with a mild soap and water solution. Wipe dry with a soft cloth. Avoid abrasive cleaners.
• అంతర్గత: Remove all products and shelves. Clean the interior with a mild, food-safe cleaning solution. Rinse thoroughly and dry before replacing products.
• గాజు తలుపులు: Use a glass cleaner for the doors. Avoid spraying directly onto the seals.

4.2 కండెన్సర్ కాయిల్ క్లీనింగ్

The condenser coil should be cleaned regularly to maintain optimal cooling efficiency and prevent compressor strain. The unit features an easily accessible condenser coil. Refer to the technical diagrams for location and access. Use a brush or vacuum cleaner to remove dust and debris from the coil fins.

4.3 డీఫ్రాస్ట్ సిస్టమ్

This merchandiser is equipped with an automatic defrost system. No manual defrosting is typically required. Ensure the drain pan is clear and free of obstructions.

5. ట్రబుల్షూటింగ్

సేవను సంప్రదించే ముందు, తిరిగిview కింది సాధారణ సమస్యలు మరియు పరిష్కారాలు:

• యూనిట్ శీతలీకరణ లేదు: Check if the power cord is securely plugged in. Verify the circuit breaker has not tripped. Ensure the temperature control is set correctly. Clean the condenser coil if it is dirty.
• అధిక శబ్దం: Check if the unit is level. Ensure no objects are vibrating against the unit. Verify fan blades are not obstructed.
• నేలపై నీరు: Check if the drain line is clogged or disconnected. Ensure the unit is level.
• Doors Not Sealing Properly: Inspect door gaskets for damage or debris. Ensure shelves are not obstructing door closure.

ఈ పరిష్కారాలను ప్రయత్నించిన తర్వాత కూడా సమస్యలు కొనసాగితే, అర్హత కలిగిన సేవా సిబ్బందిని సంప్రదించండి.

6. స్పెసిఫికేషన్లు

Figure 2: Technical specifications and dimensions.

Figure 3: Detailed technical drawing and warranty information.

7. వారంటీ సమాచారం

The True Manufacturing GDM-72-HC~TSL01 comes with a మూడు సంవత్సరాల వారంటీ on all parts and labor. Additionally, an additional two-year warranty is provided specifically for the compressor. This warranty covers defects in materials and workmanship under normal use and service.

For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official True Manufacturing webసైట్.

8. కస్టమర్ మద్దతు

For technical assistance, parts, or service inquiries, please contact True Manufacturing customer support. When contacting support, please have your model number (GDM-72-HC~TSL01) and serial number readily available.

You can find more information and contact details on the official True Manufacturing webసైట్: www.truemfg.com