పరిచయం
The Walrus Audio MAKO Series ACS1 is an advanced amp and cab simulator pedal designed to provide a wide range of classic amplifier tones and cabinet simulations directly to your sound system or recording interface. This manual will guide you through the features, setup, operation, and maintenance of your ACS1 pedal.
మూర్తి 1: ముందు view of the Walrus Audio MAKO Series ACS1 pedal, showcasing its control knobs and footswitches.
సెటప్
శక్తి అవసరాలు
The ACS1 requires a standard 9VDC power supply with a minimum of 300mA, center-negative polarity. Ensure your power supply meets these specifications to prevent damage to the unit.
మూర్తి 2: వెనుక view of the ACS1 showing the 9VDC power input, USB port, headphone jack, and mono/stereo outputs.
కనెక్షన్లు
- Input (Mono/Stereo): Connect your instrument or the output of other pedals to the input jack(s). For mono operation, use the MONO IN jack. For stereo, use both STEREO IN and MONO IN.
- Output (Mono/Stereo): Connect the ACS1 to your amplifier, mixer, or audio interface. For mono output, use the MONO OUT jack. For stereo, use both MONO OUT and STEREO OUT.
- హెడ్ఫోన్ అవుట్పుట్: A dedicated 3.5mm stereo jack for silent practice.
- USB పోర్ట్: Used for firmware updates and loading custom Impulse Responses (IRs) via a computer.
- MIDI IN/THRU: For external MIDI control of the pedal's functions and presets.
మూర్తి 3: Input jacks (Mono and Stereo).
మూర్తి 4: MIDI IN and THRU ports.
ఆపరేటింగ్ సూచనలు
పైగా నియంత్రణలుview
The ACS1 features a comprehensive set of controls to shape your tone.
మూర్తి 5: వివరంగా view of the ACS1 control panel.
- BASS, MID, TREB: Three-band EQ controls to adjust the low, mid, and high frequencies of your tone.
- VOL: పెడల్ యొక్క మొత్తం అవుట్పుట్ వాల్యూమ్ను నియంత్రిస్తుంది.
- గెయిన్: Adjusts the amount of overdrive and distortion, simulating the gain stagఒక యొక్క ఇ ampజీవితకాలం.
- గది: Controls the amount of simulated room reverb, from a dry, isolated sound to a large studio environment.
- AMP Toggle Switch (Fullerton, London, Dartford): Selects one of three iconic ampలైఫైయర్ నమూనాలు.
- ఫుల్లెర్టన్: Inspired by classic American clean amps.
- లండన్: Based on British rock ampజీవితకారులు.
- డార్ట్ఫోర్డ్: Emulates a chimey, British-voiced amp.
- CAB Toggle Switch (A, B, C): Selects one of three cabinet impulse responses (IRs). These can be customized via USB.
- L+R Toggle Switch: Determines how the amp and cab models are applied in stereo.
- L: Applies the selected amp/cab to the left channel only.
- R: Applies the selected amp/cab to the right channel only.
- +: Applies the selected amp/cab to both left and right channels.
- BYPASS Footswitch: ప్రభావాన్ని ఆన్/ఆఫ్ చేస్తుంది.
- బూస్ట్ ఫుట్స్విచ్: Activates a preset boost in volume and/or gain.
- ప్రీసెట్ బటన్: Cycles through onboard presets. The ACS1 stores 3 onboard presets (128 via MIDI).
ప్రీసెట్లను సేవ్ చేస్తోంది
To save a preset, adjust the controls to your desired settings. Press and hold the PRESET button until the LED flashes, indicating the preset has been saved.
స్టీరియో ఆపరేషన్
The ACS1 allows for flexible stereo routing. You can run the same amp model through both channels or assign different amp models to each channel using the L+R toggle switch and separate settings for each side.
నిర్వహణ
క్లీనింగ్
To clean the pedal, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components.
ఫర్మ్వేర్ నవీకరణలు
Walrus Audio periodically releases firmware updates to enhance features and improve performance. Connect the ACS1 to your computer via the USB port and visit the Walrus Audio website for instructions and software to perform updates. Keeping your firmware updated ensures optimal performance and access to the latest features.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| సౌండ్ అవుట్పుట్ లేదు. | Incorrect power supply, incorrect cable connections, pedal in bypass mode, volume knob set to zero. |
|
| Distorted or unwanted noise. | Excessive GAIN setting, incompatible power supply, ground loop. |
|
| Pedal not responding to MIDI. | Incorrect MIDI cable connection, incorrect MIDI channel, MIDI settings not configured. |
|
స్పెసిఫికేషన్లు
- మోడల్: ACS1
- అంశం మోడల్ సంఖ్య: 900-1057
- బ్రాండ్: Walrus Audio
- శక్తి అవసరం: 9VDC, 300mA, Center-Negative
- కొలతలు: 570.87 x 452.76 x 295.28 inches (Note: This dimension seems unusually large for a pedal and might be a packaging dimension. Refer to manufacturer's official product page for exact pedal dimensions.)
- వస్తువు బరువు: 0.018 ounces (Note: This weight seems unusually low for a pedal and might be an error. Refer to manufacturer's official product page for exact pedal weight.)
- కనెక్టివిటీ: Mono/Stereo Input, Mono/Stereo Output, Headphone Output, USB, MIDI IN/THRU
- ఫీచర్లు: 3 Amp Models, 3 Cab IRs (expandable), 3 Onboard Presets (128 via MIDI), 3-Band EQ, Room Reverb, Boost Function.
వారంటీ మరియు మద్దతు
For warranty information, technical support, or further assistance with your Walrus Audio MAKO Series ACS1, please visit the official Walrus Audio webసైట్లో లేదా వారి కస్టమర్ సపోర్ట్ను నేరుగా సంప్రదించండి. వారంటీ క్లెయిమ్ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.
