ఆర్మాకోస్ట్ లైటింగ్ 850240

Armacost Lighting 24-Volt 24-Watt LED Power Supply Model 850240 User Manual

మోడల్: 850240

1. ఉత్పత్తి ముగిసిందిview

The Armacost Lighting 24-Volt 24-Watt LED Power Supply (Model 850240) is designed to provide stable and energy-efficient low-voltage power for LED lighting installations. This constant voltage LED driver utilizes professional-grade electronics to ensure reliable performance.

Armacost Lighting 24-Volt 24-Watt LED Power Supply

Image: Armacost Lighting 24-Volt 24-Watt LED Power Supply with attached AC cord.

ముఖ్య లక్షణాలు:

  • Prewired with a 60-inch removable AC cord with plug for standard 120-volt AC outlets.
  • Integrated microprocessor optimizes LED dimming performance based on load.
  • Removable AC power cord allows for both plug-in and direct wiring options.
  • Automatic shut-off for protection against overload, open circuit, short circuit, and over-temperature conditions.
  • ETL listed, conforming to UL standard 1310 and certified to Canada/CSA standard C22.2 No. 223-M96.

2. భద్రతా సమాచారం

దయచేసి ఇన్‌స్టాలేషన్ మరియు వినియోగానికి ముందు అన్ని సూచనలను జాగ్రత్తగా చదవండి. ఈ సూచనలను పాటించడంలో విఫలమైతే విద్యుత్ షాక్, అగ్ని ప్రమాదం లేదా ఇతర ప్రమాదాలు సంభవించవచ్చు.

  • విద్యుత్ షాక్ ప్రమాదం: Disconnect power at the circuit breaker before installing or servicing.
  • This power supply is designed for use with 24-volt LED lighting only. Do not connect to 12-volt LED products or other voltagఇ వ్యవస్థలు.
  • అన్ని వైరింగ్ కనెక్షన్లు సురక్షితంగా ఉన్నాయని మరియు సరిగ్గా ఇన్సులేట్ చేయబడిందని నిర్ధారించుకోండి.
  • గరిష్ట వాట్‌ను మించకూడదుtagఇ రేటింగ్ 24 వాట్స్.
  • Install in a dry location. This unit is rated for dry and damp స్థానాలు మాత్రమే.
  • ఇన్‌స్టాలేషన్ ప్రక్రియలో ఏదైనా భాగం గురించి మీకు ఖచ్చితంగా తెలియకపోతే అర్హత కలిగిన ఎలక్ట్రీషియన్‌ను సంప్రదించండి.

3. ప్యాకేజీ విషయాలు

ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని నిర్ధారించుకోండి:

  • 1x Armacost Lighting 24W, 24V LED Driver
  • 1x Detachable AC Power Cord

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

This power supply offers flexibility for either plug-in or direct-wire installation. Always ensure power is disconnected before making any electrical connections.

4.1. Direct-Wire Installation

  1. Disconnect the detachable AC power cord from the power supply.
  2. Open the input terminal cover on the power supply.
  3. Connect the 100-120VAC input wires from your electrical source to the designated input terminals (L and N) on the power supply. Ensure proper polarity.
  4. Secure the wires using the terminal screws.
  5. Connect the 24V DC output wires from the power supply to your 24-volt LED lighting system. The output terminals are marked '+' and '-'.
  6. Close the input terminal cover.
Armacost Lighting 24-Volt 24-Watt LED Power Supply with direct-wire terminals

Image: Close-up of the Armacost Lighting 24-Volt 24-Watt LED Power Supply showing the input and output terminals for direct wiring.

4.2. ప్లగ్-ఇన్ సంస్థాపన

  1. Ensure the detachable AC power cord is securely connected to the power supply.
  2. Connect the 24V DC output wires from the power supply to your 24-volt LED lighting system. The output terminals are marked '+' and '-'.
  3. Plug the AC power cord into a standard 120-volt AC outlet.

ముఖ్యమైన గమనిక: This power supply is specifically designed for 24-volt lighting applications. Using it with 12-volt systems will result in improper operation and potential damage.

Armacost Lighting 24-Volt LED Power Supply indicating 24-volt compatibility

Image: Armacost Lighting 24-Volt LED Power Supply with a clear label indicating it is for 24-volt lighting only.

5. ఆపరేటింగ్ సూచనలు

Once properly installed, the Armacost Lighting 24-Volt 24-Watt LED Power Supply will provide constant voltage to your connected 24-volt LED lighting. The unit is designed for continuous operation.

5.1. Dimming Compatibility

This power supply is compatible with low-voltage LED dimmers and color controllers. For optimal performance, use Armacost Lighting LED products and compatible dimmers. Note that this power supply is not compatible with 120V AC dimmers.

Armacost Lighting 24-Volt 24-Watt LED Power Supply compatible with low-voltage LED dimmers and color controllers

Image: Armacost Lighting 24-Volt 24-Watt LED Power Supply shown with various low-voltage LED dimmers and color controllers, highlighting compatibility.

5.2. Product Application Video

కింది వీడియో ఒక ఓవర్ అందిస్తుందిview of Armacost Lighting products, including power supplies, and their applications in under cabinet LED lighting. This can offer further context on how to integrate and operate your power supply within a larger lighting system.

వీడియో: ముగిసిందిview of Armacost Lighting's under cabinet LED lighting, power supplies, and controls. This video demonstrates various products and their integration.

6. నిర్వహణ

The Armacost Lighting LED Power Supply requires minimal maintenance. Ensure the unit is kept clean and free from dust and debris to maintain optimal performance and heat dissipation.

  • Periodically inspect the power supply and all connections for any signs of damage or wear.
  • Clean the exterior with a dry, soft cloth. Do not use liquid cleaners or solvents.
  • వేడెక్కకుండా ఉండటానికి యూనిట్ చుట్టూ తగినంత వెంటిలేషన్ ఉండేలా చూసుకోండి.

7. ట్రబుల్షూటింగ్

If you encounter issues with your LED Power Supply, refer to the following table for common problems and solutions.

సమస్యసాధ్యమైన కారణంపరిష్కారం
LED లు వెలిగించవుNo power to the unit; Incorrect wiring; Overload; Faulty LED strip/fixture.Check power outlet/circuit breaker; Verify input/output wiring polarity; Reduce connected load; Test LED strip/fixture with another power source.
LEDs flicker or dim inconsistentlyLoose connections; Incompatible dimmer; Overload; Power supply issue.Secure all connections; Ensure dimmer is low-voltage compatible; Reduce connected load; Replace power supply if issue persists.
Power supply is hot to the touchOverload; Insufficient ventilation.Reduce connected load to below 24W; Ensure adequate airflow around the unit.
ఆటోమేటిక్ షట్-ఆఫ్ యాక్టివేట్ అవుతుందిOverload; Short circuit; Over-temperature.Disconnect power, check for short circuits in wiring or LED strip; Reduce load; Allow unit to cool down before reconnecting power.

8. స్పెసిఫికేషన్లు

Technical details for the Armacost Lighting 24-Volt 24-Watt LED Power Supply Model 850240:

  • మోడల్ సంఖ్య: 850240
  • ఇన్పుట్ వాల్యూమ్tage: 100-120 వి ఎసి
  • అవుట్పుట్ వాల్యూమ్tage: 24V DC
  • Maximum Output Wattage: 24 వాట్స్
  • ప్రస్తుత రేటింగ్: 1 Amps
  • శక్తి మూలం: కార్డెడ్ ఎలక్ట్రిక్
  • మౌంటు రకం: ఉపరితల మౌంట్
  • ఉత్పత్తి కొలతలు: 1.7"D x 5.3"W x 1.2"H (4.3 సెం.మీ D x 13.5 సెం.మీ W x 3.0 సెం.మీ H)
  • బరువు: సుమారు 7.04 ఔన్సులు (200 గ్రాములు)
  • ధృవపత్రాలు: ETL listed, conforms to UL standard 1310, certified to Canada/CSA standard C22.2 No. 223-M96
Armacost Lighting 24-Volt 24-Watt LED Power Supply dimensions

Image: Armacost Lighting 24-Volt 24-Watt LED Power Supply with dimensions labeled, highlighting its compact and lightweight design.

9. వారంటీ మరియు మద్దతు

For warranty information and technical support, please refer to the official Armacost Lighting webసైట్‌లో లేదా వారి కస్టమర్ సర్వీస్ విభాగాన్ని సంప్రదించండి. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.

అదనపు వనరులు మరియు ఉత్పత్తి సమాచారం కోసం, సందర్శించండి అమెజాన్‌లో ఆర్మాకోస్ట్ లైటింగ్ స్టోర్.

సంబంధిత పత్రాలు - 850240

ముందుగాview ఆర్మాకోస్ట్ లైటింగ్ స్టాండర్డ్ LED పవర్ సప్లై: ఇన్‌స్టాలేషన్ మరియు స్పెసిఫికేషన్లు
ఈ పత్రం 12-వోల్ట్ మరియు 24-వోల్ట్ మోడళ్లలో లభించే ఆర్మాకోస్ట్ లైటింగ్ యొక్క స్టాండర్డ్ LED పవర్ సప్లైస్ కోసం ఇన్‌స్టాలేషన్ మార్గదర్శకాలు, స్పెసిఫికేషన్‌లు మరియు సాంకేతిక వివరాలను అందిస్తుంది. ఇది భద్రతా జాగ్రత్తలు, వైరింగ్, వాల్యూమ్‌ను కవర్ చేస్తుంది.tagఇ డ్రాప్, మరియు వారంటీ సమాచారం.
ముందుగాview ఆర్మాకోస్ట్ లైటింగ్ ఇండోర్/అవుట్‌డోర్ స్టాండర్డ్ LED పవర్ సప్లై - 12V/24V DC
ఆర్మాకోస్ట్ లైటింగ్ ఇండోర్/అవుట్‌డోర్ స్టాండర్డ్ LED పవర్ సప్లై గురించి వివరణాత్మక సమాచారం. లక్షణాలలో స్థిరమైన వాల్యూమ్tage 12/24V DC అవుట్‌పుట్, IP67 రేటింగ్, 91% సామర్థ్యం మరియు సమగ్ర భద్రతా రక్షణలు. ఇన్‌స్టాలేషన్ మార్గదర్శకాలు, సాంకేతిక వివరణలు మరియు వారంటీ వివరాలు ఉన్నాయి.
ముందుగాview ఆర్మాకోస్ట్ రిబ్బన్‌ఫ్లెక్స్ PRO కంటిన్యూయస్ వైట్ అవుట్‌డోర్ LED టేప్ లైట్ ఇన్‌స్టాలేషన్ గైడ్
ఆర్మాకోస్ట్ రిబ్బన్‌ఫ్లెక్స్ PRO నిరంతర తెల్లటి బహిరంగ LED టేప్ లైట్లను ఎలా ఇన్‌స్టాల్ చేయాలో తెలుసుకోండి. ఈ గైడ్ విద్యుత్ సరఫరా ఎంపిక, వైరింగ్, వాల్యూమ్‌ను కవర్ చేస్తుంది.tage drop, troubleshooting, and important safety information for a successful DIY lighting project.
ముందుగాview ఆర్మాకోస్ట్ లైటింగ్ రిబ్బన్‌ఫ్లెక్స్ PRO నిరంతర LED టేప్ లైట్ ఇన్‌స్టాలేషన్ గైడ్
A comprehensive guide for installing Armacost Lighting RibbonFlex PRO continuous LED tape lights. It covers essential steps like planning, selecting power supplies and controllers, wiring, using connectors, surface preparation, troubleshooting common issues, and product specifications for Tunable White and RGB+W models.
ముందుగాview ఆర్మాకోస్ట్ లైటింగ్ LED టచ్ డిమ్మర్ | తక్కువ వాల్యూమ్tage LED నియంత్రణ | అంశం 511220
Learn about the Armacost Lighting LED Touch Dimmer (Item # 511220). This device offers full brightness control for 12V DC and 24V DC single-color LED lighting. Includes specifications, installation guide, and warranty information.
ముందుగాview ఆర్మాకోస్ట్ రిబ్బన్‌ఫ్లెక్స్ PRO కంటిన్యూయస్ వైట్ LED టేప్ లైట్ ఇన్‌స్టాలేషన్ గైడ్
ఈ సమగ్ర గైడ్‌తో ఆర్మాకోస్ట్ రిబ్బన్‌ఫ్లెక్స్ PRO కంటిన్యూయస్ వైట్ LED టేప్ లైట్‌ను ఎలా ఇన్‌స్టాల్ చేయాలో తెలుసుకోండి. ప్లానింగ్, పవర్ సప్లై ఎంపిక, కటింగ్, కనెక్ట్ చేయడం, వైరింగ్ మరియు ట్రబుల్షూటింగ్‌ను కవర్ చేస్తుంది.