Satco S11960 10.5W T8 LED Tube Light Instruction Manual

పరిచయం

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Satco S11960 10.5 Watt T8 LED Tube Light. This LED tube is designed for ballast bypass applications, meaning it connects directly to line voltage. Please read this manual thoroughly before attempting installation or use.

ముఖ్యమైన భద్రతా సమాచారం

హెచ్చరిక: విద్యుత్ షాక్ ప్రమాదం. Always disconnect power at the circuit breaker or fuse box before installation, removal, or servicing. Failure to do so may result in serious injury or death.

• Installation requires knowledge of luminaires' electrical systems. If you are not qualified, do not attempt installation. Contact a qualified electrician.
• ఈ ఎల్amp is designed for direct wire (ballast bypass) applications. Do not use with an existing fluorescent ballast.
• Do not use with dimmers unless explicitly stated on the product packaging or specifications.
• పొడి మరియు డి కోసం అనుకూలంamp locations. Not suitable for wet locations.
• ఫిక్చర్ సరిగ్గా గ్రౌండ్ చేయబడిందని నిర్ధారించుకోండి.
• l ను వంచవద్దుamp సంస్థాపన సమయంలో.
• ఆపరేటింగ్ ఉష్ణోగ్రత పరిధి: -20°C నుండి 45°C (-4°F నుండి 113°F).

ప్యాకేజీ విషయాలు

Your package contains the Satco S11960 10.5 Watt T8 LED Tube Light(s).

Image: A single Satco S11960 T8 LED tube light, showing its full length and bi-pin connectors at both ends.

Installation Instructions (Ballast Bypass)

This LED tube is a Type B (Ballast Bypass) lamp, requiring direct wiring to the main power supply. The existing fluorescent ballast must be removed or bypassed.

సాధారణ ఇన్‌స్టాలేషన్ దశలు:

1. పవర్ డిస్‌కనెక్ట్ చేయండి: Turn off power to the fixture at the circuit breaker or fuse box. Verify power is off using a voltagఇ టెస్టర్.
2. Remove Existing Lamp: Carefully remove the existing fluorescent lamp(లు) ఫిక్చర్ నుండి.
3. Bypass/Remove Ballast: Open the fixture and locate the fluorescent ballast. Disconnect all wires leading to and from the ballast. Remove the ballast from the fixture.
4. Rewire Fixture: This LED tube supports both single-ended and double-ended wiring. Refer to the specific wiring diagrams below for your chosen method.
5. LED ట్యూబ్‌ను ఇన్‌స్టాల్ చేయండి: Insert the Satco S11960 LED tube into the fixture's lamp holders. Ensure it is securely seated.
6. శక్తిని పునరుద్ధరించండి: Close the fixture cover and restore power at the circuit breaker.

వైరింగ్ ఎంపికలు:

Image: Two Satco T8 LED tubes. One is labeled for 'Single End' wiring, indicating power connects to one end. The other is labeled for 'Double End' wiring, indicating power connects to both ends.

1. Single-Ended Wiring:

For single-ended wiring, power (Line and Neutral) is connected to the pins on one end of the LED tube. The other end of the tube is not connected to power.

• Connect the Line (L) wire from the main power supply to one pin of the designated 'input' end of the lamp హోల్డర్.
• Connect the Neutral (N) wire from the main power supply to the other pin of the designated 'input' end of the lamp హోల్డర్.
• ది ఎల్amp holders on the opposite end of the fixture should not be wired to power.

Image: Close-up of an LED tube end cap showing two pins labeled 'L' (Line) and 'N' (Neutral), indicating where power should be connected for single-ended wiring.

2. Double-Ended Wiring:

For double-ended wiring, the Line (L) wire is connected to one end of the LED tube, and the Neutral (N) wire is connected to the other end. Both ends of the fixture's lamp holders will be wired.

• Connect the Line (L) wire from the main power supply to one pin of the lamp holder at one end of the fixture.
• Connect the Neutral (N) wire from the main power supply to one pin of the lamp holder at the opposite end of the fixture.
• Ensure that the pins on the same end of the tube are not shorted together.

Image: Close-up of an LED tube end cap showing one pin labeled 'L' (Line), indicating where the Line power should be connected for double-ended wiring. The Neutral connection would be on the opposite end of the tube.

ఆపరేటింగ్ సూచనలు

Once properly installed, the Satco S11960 LED tube light operates like a standard light fixture.

• Turn on the wall switch or power supply connected to the fixture to illuminate the lamp.
• Turn off the wall switch or power supply to extinguish the lamp.
• No warm-up time is required; the lamp will provide instant full brightness.

నిర్వహణ

The Satco S11960 LED tube light requires minimal maintenance.

• శుభ్రపరచడం: Ensure power is disconnected before cleaning. Wipe the lamp మృదువైన, పొడి లేదా కొద్దిగా d తోamp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
• వినియోగదారు-సేవ చేయదగిన భాగాలు లేవు: The LED tube contains no user-serviceable parts. Do not attempt to open or repair the lamp.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

Image: Diagram showing the dimensions of the Satco T8 LED tube, indicating a length of 48.00 inches (1219.20mm) and a diameter of 1.10 inches (27.94mm).

వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the documentation included with your purchase or contact Satco customer service directly. Contact details can typically be found on the manufacturer's official webసైట్.