1. ఉత్పత్తి ముగిసిందిview
The Montech X3 Mesh is an ATX Mid-Tower PC Gaming Case designed for high airflow and visual appeal. It comes equipped with six pre-installed fixed RGB lighting fans (3x 140mm in the front, 2x 120mm on top, and 1x 120mm in the rear) to optimize cooling and provide vibrant illumination. The case features a unique door-open tempered glass side panel for easy access and a full panoramic view మీ అంతర్గత భాగాలు.
Figure 1: Montech X3 Mesh PC Gaming Case (Black)
2. సెటప్ గైడ్
2.1 అన్బాక్సింగ్ మరియు ప్రారంభ తనిఖీ
Carefully remove the case from its packaging. Inspect for any signs of damage during transit. Ensure all accessories, including screws and cable ties, are present.
2.2 కాంపోనెంట్ ఇన్స్టాలేషన్
The Montech X3 Mesh supports ATX, Micro-ATX, and Mini-ITX motherboards. It offers ample space for CPU coolers up to 160mm high and GPUs up to 305mm long.
Figure 2: Internal Component Clearance
2.2.1 మదర్బోర్డ్ సంస్థాపన
- Open the tempered glass side panel by gently pulling the fabric tab.
- Install the I/O shield into the motherboard cutout at the rear of the case.
- Align your motherboard with the standoffs inside the case and secure it with screws.
2.2.2 విద్యుత్ సరఫరా యూనిట్ (PSU) సంస్థాపన
The PSU is mounted at the rear bottom of the case. The case supports PSUs up to 160mm in length.
- కేసు వెనుక నుండి PSUని దాని నియమించబడిన కంపార్ట్మెంట్లోకి జారండి.
- Secure the PSU with screws from the outside.
2.2.3 స్టోరేజ్ డ్రైవ్ ఇన్స్టాలేషన్
The case provides bays for 2x 2.5" SSDs behind the motherboard tray and 2x 3.5" HDDs (or 2x 2.5" SSDs) in a removable cage below the PSU shroud.
Figure 3: Drive Bay Locations
- For 2.5" SSDs, mount them directly onto the SSD brackets behind the motherboard tray.
- For 3.5" HDDs, slide them into the drive cage located under the PSU shroud and secure. The drive cage is removable for easier installation or to create more space.
2.2.4 గ్రాఫిక్స్ కార్డ్ (GPU) ఇన్స్టాలేషన్
Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with the provided screws.
2.3 కేబుల్ నిర్వహణ
The Montech X3 Mesh offers dedicated cutouts and tie-down points behind the motherboard tray for efficient cable routing, ensuring a clean build and improved airflow.
Figure 4: Smart Cable Management Features
3. ఆపరేటింగ్ సూచనలు
3.1 పవర్ ఆన్
Connect your power cable to the PSU and press the power button located on the top I/O panel.
Figure 5: Top I/O Panel
3.2 RGB లైటింగ్ నియంత్రణ
The X3 Mesh features fixed RGB lighting fans. To turn the fan lighting on or off, simply press the dedicated LED button on the top I/O panel. Note that the lighting is fixed and not addressable.
Video 1: Demonstration of RGB Lighting Fans
This video showcases the fixed RGB lighting of the fans within the Montech X3 Mesh case, highlighting their visual effect when powered on.
3.3 వాయుప్రవాహం మరియు శీతలీకరణ
The case is designed for high airflow, with triple 140mm fans in the front providing massive air intake and pre-mounted fans at the top and rear for optimal exhaust. This configuration helps maintain low temperatures for your components.
Figure 6: Optimized Airflow Design
4. నిర్వహణ
4.1 డస్ట్ ఫిల్టర్లను శుభ్రపరచడం
The Montech X3 Mesh includes a magnetic dust filter on the top panel and a washable dust filter for the PSU intake at the bottom. Regularly clean these filters to prevent dust buildup and maintain optimal airflow.
- Gently remove the magnetic dust filter from the top panel.
- Slide out the PSU dust filter from the bottom of the case.
- Clean the filters using compressed air or by washing them with water (ensure they are completely dry before re-installation).
4.2 సాధారణ శుభ్రపరచడం
Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panel. For stubborn smudges on the glass, a glass cleaner can be used sparingly on the cloth, not directly on the panel.
5. ట్రబుల్షూటింగ్
5.1 Fans Not Spinning / RGB Not Lighting Up
- Ensure all fan Molex connectors are securely connected to your power supply. The pre-installed fans are daisy-chained, so check the connection to the last fan in the chain.
- Verify that the LED button on the top I/O panel is pressed to activate the RGB lighting.
- Check the power supply connections to the fan hub (if applicable) and the motherboard.
5.2 Poor Airflow / High Temperatures
- Clean all dust filters as described in Section 4.1.
- Ensure proper cable management to avoid obstructing airflow paths inside the case.
- Verify that all fans are spinning correctly.
6. సాంకేతిక లక్షణాలు
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| మోడల్ పేరు | X3 MESH Black |
| కేసు రకం | మిడ్ టవర్ |
| మదర్బోర్డు అనుకూలత | ATX, మైక్రో-ATX, Mini-ITX |
| కొలతలు (LxWxH) | 14.57 x 8.27 x 18.9 అంగుళాలు |
| వస్తువు బరువు | 14.3 పౌండ్లు |
| మెటీరియల్ | Tempered Glass (Side Panel) |
| ముందే ఇన్స్టాల్ చేసిన అభిమానులు | Front: 3x 140mm Fixed RGB Top: 2x 120mm Fixed RGB Rear: 1x 120mm Fixed RGB |
| అభిమానుల మద్దతు | Front: 3x 120mm/140mm Top: 2x 120mm/140mm వెనుకవైపు: 1X 120mm |
| రేడియేటర్ మద్దతు | టాప్: 280mm వరకు Front: Up to 360mm (with HDD cage removed) |
| CPU కూలర్ క్లియరెన్స్ | 160మి.మీ |
| GPU క్లియరెన్స్ | 305మి.మీ |
| డ్రైవ్ బేస్ | 2x 2.5" SSD 2x 3.5" HDD (convertible to 2.5" SSD) |
| I/O పోర్ట్లు | 2x USB 2.0, 1x USB 3.0, HD Audio (Mic/Headphone), Power Button, Reset Button, LED Control Button |
| విద్యుత్ సరఫరా మౌంటు రకం | వెనుక మౌంట్ |
7. వారంటీ మరియు మద్దతు
For warranty information, technical support, or to inquire about replacement parts, please refer to the official Montech webసైట్లో లేదా వారి కస్టమర్ సర్వీస్ను నేరుగా సంప్రదించండి. వారంటీ క్లెయిమ్ల కోసం కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.
Montech offers various protection plans for extended coverage. Please visit the product page on Amazon or Montech's official webఅందుబాటులో ఉన్న ప్లాన్ల వివరాల కోసం సైట్.
