1. పరిచయం
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Okin Model JLDQ-11 & JLDQ.11.156.333P Power Recliner Lift Chair Motor. Please read these instructions thoroughly before proceeding with installation or use.
2. ఉత్పత్తి ముగిసిందిview
The Okin JLDQ.11.156.333P is a replacement actuator motor designed for power recliners and lift chairs. It is an original Okin JLDQ motor, suitable for replacing existing JLDQ.11.156.333P units.
ముఖ్య లక్షణాలు:
- మోటార్ రకం: Linear actuator for recliner mechanisms.
- భాగాలు: Consists of one motor and three distinct connectors.
- స్వరూపం: Black (PA) housing with a silver-white (aluminum) shaft.
- స్ట్రోక్: 333మి.మీ.
- Minimum Dimensions (Shrink): 156మి.మీ.
- Maximum Dimensions (Extended): 489మి.మీ.
- లోడ్ సామర్థ్యం: Push force: 650N, Pull force: 650N (approximately 146 lbs).
- ఆపరేషన్ ఫ్రీక్వెన్సీ: On 1 minute / Off 8 minutes.
- వేగం: 29VDC SMPS, 7 seconds without load.
3. స్పెసిఫికేషన్లు
| గుణం | వివరాలు |
|---|---|
| బ్రాండ్ | ఓకిన్ |
| మోడల్ సంఖ్య | JLDQ.11.156.333P |
| రంగు | నలుపు |
| స్ట్రోక్ | 333మి.మీ |
| Minimum Dimensions (Shrink) | 156మి.మీ |
| Maximum Dimensions (Extended) | 489మి.మీ |
| Load Capacity (Push/Pull) | 650N (approx. 146 lbs) |
| ఆపరేషన్ ఫ్రీక్వెన్సీ | On 1 min / Off 8 min |
| Power Supply Speed | 29VDC SMPS, 7 sec without load |
| వస్తువు బరువు | 5.5 పౌండ్లు |
| ఉత్పత్తి కొలతలు | 22 x 6.7 x 3.5 అంగుళాలు |
4. భద్రతా సమాచారం
ముఖ్యమైన భద్రతా జాగ్రత్తలు:
- బరువు సామర్థ్యం: This product has a maximum weight capacity of approximately 146 lbs (650N). Exceeding this weight capacity may result in reduced product performance or potential safety risks.
- స్థిరమైన ఉపరితలం: Always ensure the chair is used on a stable, hard floor surface.
- Design Limits: Do not subject the motor or chair to forces exceeding its design limits.
- విద్యుత్ భద్రత: Ensure all electrical connections are secure and conform to local electrical codes. Disconnect power before performing any maintenance or installation.
- పిల్లలు మరియు పెంపుడు జంతువులు: Keep children and pets away from moving parts during operation.
5. సంస్థాపన
This motor is designed as a direct replacement for Okin Model JLDQ.11.156.333P. Compatibility with other models or brands is not guaranteed due to variations in frame requirements, minimum install dimensions, stroke, and plug types. Verify your existing motor's brand and model number before installation.
ఇన్స్టాలేషన్ దశలు:
- తయారీ: Disconnect the recliner from its power source. Position the recliner to access the motor area safely.
- కనెక్షన్లను గుర్తించండి: The motor set includes three types of connectors:
- A 5-pin round plug for the switch hand control.
- A 2-pin square plug with a clip for the power supply.
- A 2-pin socket for a slaved motor (if applicable).
- పాత మోటారును తొలగించండి: Carefully detach the old motor from the recliner frame. Retain all existing mounting hardware (bolts, nuts, pins) as this replacement motor does not typically include them.
- కొత్త మోటారును అమర్చడం: Align the new Okin JLDQ.11.156.333P motor with the mounting points on the recliner frame. Secure it using the retained hardware. Ensure the motor is firmly attached and moves freely without obstruction.
- వైరింగ్ కనెక్ట్ చేయండి: Connect the 5-pin round plug to the hand control, the 2-pin square plug to the power supply, and the 2-pin socket to any slaved motor if your recliner uses one. Ensure all connections are snug.
- పరీక్ష ఆపరేషన్: Once installed and wired, reconnect the recliner to power. Test the motor's function using the hand control to ensure smooth and complete extension and retraction.
గమనిక: If you are comfortable with basic mechanical tasks and have a socket wrench set and hex keys, you should be able to perform this installation. If unsure, consult a professional.
6. ఆపరేషన్
Once correctly installed, the Okin JLDQ.11.156.333P motor operates in conjunction with your recliner's existing hand control. Pressing the appropriate buttons on the hand control will activate the motor, causing the recliner mechanism to extend or retract.
- Ensure the recliner is connected to a functional power outlet.
- Use the hand control to adjust the recliner to your desired position.
- Avoid continuous operation for more than 1 minute to prevent overheating. Allow an 8-minute rest period between extended uses.
7. నిర్వహణ
Regular maintenance helps ensure the longevity and optimal performance of your Okin recliner motor.
- శుభ్రపరచడం: The motor housing can be spot cleaned with a dry or slightly damp వస్త్రం. కఠినమైన రసాయనాలు లేదా అధిక తేమను ఉపయోగించడం మానుకోండి.
- తనిఖీ: మోటారు మరియు దాని కనెక్షన్లను ఏవైనా అరిగిపోయిన, దెబ్బతిన్న లేదా వదులుగా ఉన్న వైరింగ్ సంకేతాల కోసం కాలానుగుణంగా తనిఖీ చేయండి.
- సరళత: The internal components of the motor are factory-lubricated and generally do not require additional lubrication. If unusual noises occur, consult a professional.
- పర్యావరణ పరిస్థితులు: Ensure the motor is used in an indoor environment, as specified by the manufacturer.
8. ట్రబుల్షూటింగ్
If your recliner motor is not functioning as expected, perform the following basic troubleshooting steps:
- విద్యుత్ సరఫరాను తనిఖీ చేయండి: Ensure the recliner is properly plugged into a working electrical outlet. Verify that the power supply unit (transformer) is receiving power and its indicator light (if present) is on.
- Inspect Hand Control: Test the hand control for responsiveness. Sometimes, a faulty hand control can prevent the motor from operating.
- కనెక్షన్లను పరిశీలించండి: Check all motor connections (5-pin for hand control, 2-pin for power, 2-pin for slaved motor) to ensure they are securely seated and not damaged.
- మోటార్ అనుకూలత: Confirm that the installed motor is indeed the correct Okin JLDQ.11.156.333P model, especially if it's a recent replacement. Incompatible motors will not function correctly.
- అడ్డంకులు: Look for any physical obstructions preventing the recliner mechanism or motor rod from moving freely.
If these steps do not resolve the issue, it may indicate a more complex problem with the motor or electrical system. In such cases, it is recommended to contact a qualified technician or the manufacturer's support.
9. వారంటీ మరియు మద్దతు
For warranty information or technical support regarding your Okin JLDQ.11.156.333P Power Recliner Lift Chair Motor, please refer to the documentation provided at the time of purchase or contact Okin customer service directly. Ensure you have your model number (JLDQ.11.156.333P) and any purchase details available when seeking support.
You can find more information about Okin products and support on their official channels or through authorized distributors.
