పరిచయం
This manual provides detailed instructions for the installation, operation, and maintenance of your TOPGREENER Kalide Dual Load Dimmer Light Switch, Model TGDDS-GY. Please read all instructions carefully before beginning installation to ensure proper function and safety.
చిత్రం: ముందు భాగం view of the TOPGREENER Kalide Dual Load Dimmer Light Switch, Model TGDDS-GY.
భద్రతా సమాచారం
హెచ్చరిక: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
- Use only with dimmable LED, CFL, incandescent, or halogen bulbs.
- Do not use with non-dimmable bulbs or smart lighting fixtures.
- For single-pole applications only.
- Ensure wiring connections are secure and insulated.
- ఆపరేటింగ్ వాల్యూమ్tagఇ: 120VAC, 60Hz.
ఉత్పత్తి లక్షణాలు
- Dual Load Dimming: Controls two separate light loads from a single wall switch location.
- Full-Range Dimming: Two independent sliders allow for precise light level adjustment for each load.
- అనుకూలత: Supports major-brand dimmable LED, CFL, incandescent, and halogen bulbs.
- Neutral Wire Not Required: Simplifies installation in older homes or locations without a neutral wire.
- మన్నికైన నిర్మాణం: Made of Polycarbonate Thermoplastic material for impact and heat resistance.
- స్పేస్-సేవింగ్ డిజైన్: Occupies only one gang space for efficient use of electrical box capacity.
Image: Diagram highlighting the light level settings and noticeable stops on the dual sliders of the dimmer switch.
Image: Visual representation of bulb compatibility, indicating support for dimmable LED bulbs and non-compatibility with RGB, three-color, and Wi-Fi smart bulbs.
ఇన్స్టాలేషన్ గైడ్
ప్రీ-ఇన్స్టాలేషన్
- పవర్ ఆఫ్ చేయండి: Locate the circuit breaker or fuse box that controls the light fixture you are working on. Turn off the power completely. Verify power is off using a voltagఇ టెస్టర్.
- పాత స్విచ్ తొలగించండి: Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires from the old switch.
వైరింగ్ సూచనలు
The Kalide TGDDS-GY dimmer is designed for single-pole applications and does not require a neutral wire. It has screw terminals for secure connections.
- Line Wire: Connect the incoming hot wire (usually black) from the circuit breaker to one of the dimmer's screw terminals.
- Load Wires (2): Connect the two wires going to your light fixtures (loads) to the remaining two screw terminals on the dimmer. Each slider controls one load.
- గ్రౌండ్ వైర్: Connect the bare copper or green insulated ground wire from the electrical box to the dimmer's green ground screw.
Ensure all wire connections are tight and properly insulated with electrical tape or wire nuts.
Image: Illustrates that the dimmer switch does not require a neutral wire, making it compatible with standard electrical wiring in various homes.
మౌంటు
- Carefully fold the wires into the electrical box.
- Secure the dimmer switch to the electrical box using the provided screws.
- Attach the wall plate (sold separately) over the dimmer switch.
- శక్తిని పునరుద్ధరించండి: సర్క్యూట్ బ్రేకర్ వద్ద పవర్ను తిరిగి ఆన్ చేయండి.
ఆపరేటింగ్ సూచనలు
The Kalide Dual Load Dimmer features two independent sliders for controlling two separate lighting loads.
- లైట్లను ఆన్/ఆఫ్ చేయడం: To turn a light load ON, slide the corresponding slider upwards. To turn it OFF, slide the slider all the way down until it clicks.
- ప్రకాశం సర్దుబాటు: Move the slider up to increase brightness and down to decrease brightness. Each slider controls its respective light load independently.
Video: Demonstrates the operation of the TOPGREENER Kalide Dual Load Dimmer Light Switch, showing how to adjust brightness for two separate light loads using the independent sliders.
చిత్రం: క్లోజప్ view of the dimmer switch, illustrating the two distinct sliders for controlling individual light loads.
నిర్వహణ
To maintain the appearance and functionality of your dimmer switch:
- మృదువైన, డితో శుభ్రం చేయండిamp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
- Ensure the switch is free from dust and debris to prevent interference with slider movement.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Lights do not turn ON or OFF. | No power to the switch; loose wiring; faulty bulb. | Check circuit breaker; verify wiring connections; replace bulb. |
| లైట్లు మసకబారవు లేదా ఆరిపోవు. | Non-dimmable bulbs; incompatible bulb type; minimum load not met. | Ensure bulbs are dimmable; check bulb compatibility; consult bulb manufacturer for minimum load requirements. |
| డిమ్మర్ స్విచ్ తాకితే వేడిగా ఉంటుంది. | Overload; improper ventilation. | మొత్తం వాట్ తగ్గించండిtage of connected bulbs; ensure proper air circulation around the switch. |
| Switch becomes unresponsive or goes to auto-dim. | Internal malfunction or temporary electrical anomaly. | Try cycling the sliders fully up and down to reset. If issue persists, contact support. |
స్పెసిఫికేషన్లు
| గుణం | వివరాలు |
|---|---|
| మోడల్ | TGDDS-GY |
| ఆపరేటింగ్ వాల్యూమ్tage | 120VAC, 60Hz |
| Load (LED/CFL) | 200W మాక్స్ |
| Load (Incandescent/Halogen) | 300W మాక్స్ |
| సర్క్యూట్ రకం | సింగిల్ పోల్ |
| వైరింగ్ అవసరం | Neutral Wire Not Required |
| వైర్ గేజ్ | #14-#12 AWG (copper only) |
| మెటీరియల్ | పాలికార్బోనేట్ థర్మోప్లాస్టిక్ |
| ధృవపత్రాలు | UL జాబితా చేయబడింది |
| కొలతలు | 4.65 x 2.32 x 2.32 అంగుళాలు |
వారంటీ మరియు మద్దతు
This TOPGREENER Kalide Dual Load Dimmer Light Switch (Model TGDDS-GY) comes with a 1 సంవత్సరాల వారంటీ కొనుగోలు చేసిన తేదీ నుండి.
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact TOPGREENER customer support. Refer to the product packaging or the official TOPGREENER webప్రస్తుత సంప్రదింపు సమాచారం కోసం సైట్.
