1. పరిచయం
This manual provides essential information for the safe and efficient operation of your ELSIST HOME950 Uninterruptible Power Supply (UPS). A UPS is designed to provide emergency power to a load when the input power source or mains power fails. It also provides protection from power surges and voltage fluctuations. Please read this manual thoroughly before installation and use, and retain it for future reference.
2. ముఖ్యమైన భద్రతా సూచనలు
Please observe the following safety precautions to ensure safe operation and to prevent damage to the UPS or connected equipment.
- ప్లేస్మెంట్: Install the UPS in a well-ventilated area, away from direct sunlight, heat sources, and excessive dust. Ensure adequate clearance around the unit for proper airflow.
- పర్యావరణం: Do not operate the UPS in environments with high humidity or near liquids. Avoid placing the UPS where it could be exposed to water or other fluids.
- శక్తి మూలం: Connect the UPS to a grounded AC power outlet. Do not remove the grounding prong from the power cord.
- ఓవర్లోడ్: Do not overload the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's rated capacity.
- సర్వీసింగ్: There are no user-serviceable parts inside the UPS. Refer all servicing to qualified service personnel. Opening the casing may result in electric shock.
- బ్యాటరీ: The UPS contains a sealed lead-acid battery. Do not dispose of batteries in a fire, as they may explode. Follow local regulations for battery disposal.
3. ప్యాకేజీ విషయాలు
క్రింద జాబితా చేయబడిన అన్ని వస్తువులు మీ ప్యాకేజీలో చేర్చబడ్డాయని ధృవీకరించండి:
- ELSIST HOME950 UPS Unit
- వినియోగదారు మాన్యువల్ (ఈ పత్రం)
- AC పవర్ కార్డ్
4. ఉత్పత్తి ముగిసిందిview
4.1 ఫ్రంట్ ప్యానెల్
The front panel of the ELSIST HOME950 UPS features indicators and control buttons for easy operation.
చిత్రం: ముందు భాగం view of the ELSIST HOME950 UPS, showing the power button and LED indicators.
- పవర్ బటన్: Press to turn the UPS ON or OFF.
- LED సూచికలు: Display the operational status of the UPS (e.g., AC mode, battery mode, fault).
4.2 వెనుక ప్యానెల్
The rear panel provides the necessary connections for power input and output.
- AC ఇన్పుట్: Connects the UPS to the mains power supply.
- Schuko Output (Type F): Provides battery backup and surge-protected power to connected devices. This model features one Schuko Type F connector.
5. సెటప్
5.1 ప్లేస్మెంట్
Choose a suitable location for your UPS:
- UPSని చదునైన, స్థిరమైన ఉపరితలంపై ఉంచండి.
- Ensure the ambient temperature is between 0°C and 40°C (32°F and 104°F).
- సాపేక్ష ఆర్ద్రతను 0% మరియు 90% మధ్య (ఘనీభవనం కాని) నిర్వహించండి.
- Keep the UPS away from sources of moisture, heat, and direct sunlight.
5.2 Connecting the UPS
- Connect the supplied AC power cord to the AC Input port on the rear of the UPS.
- AC పవర్ కార్డ్ యొక్క మరొక చివరను గ్రౌండెడ్ వాల్ అవుట్లెట్లోకి ప్లగ్ చేయండి.
- Connect your computer, monitor, and other critical devices to the Schuko Type F output connector on the rear of the UPS.
- Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery runtime.
6. UPSని నిర్వహించడం
6.1 పవర్ చేయడం ఆన్/ఆఫ్
- పవర్ ఆన్ చేయడానికి: Press and hold the Power Button on the front panel for approximately 3 seconds until you hear a beep and the indicators light up.
- పవర్ ఆఫ్ చేయడానికి: Press and hold the Power Button for approximately 3 seconds until the indicators turn off.
6.2 Understanding Indicators
The LED indicators on the front panel provide information about the UPS status:
- ఆకుపచ్చ LED (ఘన): UPS is operating in AC mode, providing power to connected devices and charging the battery.
- Green LED (Flashing) & Audible Alarm: UPS is operating in battery mode due to a power outage. The alarm indicates the remaining battery capacity is low.
- Red LED (Solid) & Continuous Alarm: Indicates a fault condition. Refer to the Troubleshooting section.
6.3 బ్యాటరీ మోడ్
When the mains power fails, the UPS will automatically switch to battery mode, providing power to connected devices. The UPS will emit an audible alarm to indicate it is running on battery power. The duration of battery backup depends on the load connected and the battery's charge level.
7. నిర్వహణ
7.1 బ్యాటరీ సంరక్షణ
- To maintain optimal battery life, ensure the UPS is connected to an AC outlet at all times to keep the battery charged.
- Perform a full discharge and recharge cycle every 3-6 months if the UPS is not frequently used or experiences power outages.
- బ్యాటరీ భర్తీని అర్హత కలిగిన సేవా సిబ్బంది మాత్రమే చేయాలి.
7.2 శుభ్రపరచడం
To clean the UPS, disconnect it from the power outlet and all connected devices. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners.
8. ట్రబుల్షూటింగ్
If you encounter issues with your ELSIST HOME950 UPS, refer to the table below for common problems and solutions.
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| UPS ఆన్ అవ్వడం లేదు. | No AC input power. Battery is deeply discharged. | Ensure the AC power cord is securely connected to a live wall outlet. Allow the UPS to charge for several hours. |
| UPS beeps continuously and Red LED is solid. | Internal fault or battery failure. | Turn off the UPS, disconnect all devices, and unplug from the wall. Wait a few minutes, then plug it back in and try to power on. If the issue persists, contact support. |
| Short battery backup time. | Battery not fully charged. Battery nearing end of life. Overload. | Allow the UPS to charge for at least 8 hours. Reduce the number of connected devices. Consider battery replacement if the battery is old. |
| UPS is in battery mode even with AC power present. | ఇన్పుట్ వాల్యూమ్tage is too high or too low (AVR activating). | This is normal operation for the Automatic Voltage Regulation (AVR) feature. The UPS is protecting your devices from voltagఇ హెచ్చుతగ్గులు. |
If the problem persists after trying these solutions, please contact ELSIST customer support.
9. స్పెసిఫికేషన్లు
Technical specifications for the ELSIST HOME950 UPS:
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| మోడల్ | హోమ్950 |
| కెపాసిటీ | 950 VA / 570 W |
| ఇన్పుట్ వాల్యూమ్tage | 220-240 VAC (Nominal) |
| అవుట్పుట్ వాల్యూమ్tage | 220-240 VAC (Nominal) |
| అవుట్పుట్ సాకెట్లు | 1 x Schuko Type F |
| బదిలీ సమయం | Typically 2-6 ms |
| బ్యాటరీ రకం | సీలు చేసిన లెడ్-యాసిడ్, నిర్వహణ రహితం |
| రీఛార్జ్ సమయం | 8 hours to 90% capacity (approx.) |
| ఆపరేటింగ్ ఉష్ణోగ్రత | 0°C - 40°C |
| ఆపరేటింగ్ తేమ | 0% - 90% (ఘనీభవనం కానిది) |
10. వారంటీ మరియు మద్దతు
ELSIST products are manufactured to high-quality standards and are warranted against defects in materials and workmanship for a specified period from the date of purchase. Please refer to the warranty card included with your product or visit the official ELSIST webవివరణాత్మక వారంటీ నిబంధనలు మరియు షరతుల కోసం సైట్.
For technical support, service, or warranty claims, please contact ELSIST customer service through their official channels. Have your product model and serial number ready when contacting support.
ELSIST Official Webసైట్: www.elsist.it (ఇది ఒక ప్లేస్హోల్డర్ లింక్, దయచేసి వాస్తవ మద్దతును ధృవీకరించండి webసైట్)
