వైల్డ్‌గేమ్ ఇన్నోవేషన్స్ మిరాజ్ ప్రో లైట్‌సౌట్ ట్రైల్ కెమెరా యూజర్ మాన్యువల్

1. పరిచయం

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Wildgame Innovations Mirage PRO LIGHTSOUT Trail Camera. Please read this manual thoroughly before using your camera to ensure optimal performance and longevity.

The Mirage PRO LIGHTSOUT is designed for capturing high-quality photos and videos of wildlife with its 32MP photo resolution and 720p HD video capabilities. It features a 75-foot illumination range and a fast trigger speed of less than 3/4 second, utilizing 40 high-intensity invisible IR LEDs for discreet night vision. The camera comes bundled with essential accessories, including an 8X AA battery pack and a 16GB SD card, to get you started immediately.

2. ప్యాకేజీ విషయాలు

• Wildgame Innovations Mirage PRO LIGHTSOUT Trail Camera (Model: SP32B20W18-21)
• 8X AA బ్యాటరీలు
• 16GB SD కార్డ్
• Tree Strap for mounting
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

3. కెమెరా ఓవర్view

Familiarize yourself with the camera's external features and controls.

మూర్తి 1: ముందు view of the Wildgame Innovations Mirage PRO LIGHTSOUT Trail Camera, showcasing its camouflaged casing, lens, and IR emitters.

మూర్తి 2: వైపు view of the trail camera, illustrating its compact design and mounting points.

4. సెటప్

4.1. బ్యాటరీ ఇన్‌స్టాలేషన్

1. Locate the battery compartment on the camera. This is typically found on the bottom or side, secured by a latch.
2. Open the latch and carefully open the battery door.
3. Insert the 8 included AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery door securely until the latch clicks into place.

4.2. SD కార్డ్ సంస్థాపన

1. బ్యాటరీ కంపార్ట్‌మెంట్ తెరిచి ఉన్నప్పుడు, SD కార్డ్ స్లాట్‌ను గుర్తించండి.
2. Insert the included 16GB SD card into the slot with the label facing up (or as indicated by the diagram near the slot) until it clicks into place.
3. To remove the SD card, gently push it in until it clicks, then release, and it will spring out.

4.3. కెమెరాను మౌంట్ చేయడం

1. Select a suitable location for your camera, such as a tree or post, ensuring a clear view మీరు పర్యవేక్షించాలనుకుంటున్న ప్రాంతం.
2. Thread the provided tree strap through the mounting slots on the back of the camera.
3. Securely fasten the strap around the chosen mounting surface, ensuring the camera is stable and pointed in the desired direction.
4. కెమెరా కోణాన్ని అవసరమైన విధంగా సర్దుబాటు చేయండి.

5. ఆపరేటింగ్ సూచనలు

5.1. పవర్ చేయడం ఆన్/ఆఫ్

• To power on the camera, locate the power switch (typically inside the battery compartment or on the control panel) and slide it to the 'ON' position.
• The camera will usually display a startup screen or enter a setup mode.
• To power off, slide the switch to the 'OFF' position.

5.2. Basic Settings and Modes

The camera features a push-button controller for navigating menus and adjusting settings. Refer to the on-screen prompts for specific options.

• మోడ్ ఎంపిక: Use the control buttons to select between Photo, Video, or Photo+Video modes.
• రిజల్యూషన్: Set photo resolution to 32MP and video resolution to 720p HD for optimal quality.
• ట్రిగ్గర్ ఆలస్యం: Adjust the delay between detections to prevent excessive captures.
• తేదీ మరియు సమయం: ఖచ్చితమైన సమయం కోసం సరైన తేదీ మరియు సమయాన్ని సెట్ చేయండిampమీ క్యాప్చర్లపై లు.
• సున్నితత్వం: Adjust the PIR sensor sensitivity based on environmental conditions to minimize false triggers.

5.3. Silent Shield Technology and Night Vision

The Mirage PRO LIGHTSOUT incorporates Silent Shield technology, ensuring quiet operation to avoid disturbing wildlife. Its 40 high-intensity invisible IR LEDs provide a 75-foot illumination range for clear night vision without emitting a visible flash.

5.4. చిత్రాలు మరియు వీడియోలను సంగ్రహించడం

Once configured, the camera will automatically capture images or videos when motion is detected within its 75-foot range. The trigger speed is less than 3/4 second, ensuring minimal delay in capturing fast-moving subjects.

మూర్తి 3: Example of a daytime image captured by the camera, showing a deer in a natural habitat.

మూర్తి 4: Example of a nighttime image captured by the camera, demonstrating its invisible IR night vision capabilities on a deer.

మూర్తి 5: A daytime capture of a coyote, showcasing the camera's ability to detect and photograph various wildlife.

6. నిర్వహణ

6.1. బ్యాటరీ భర్తీ

When the battery indicator shows low power, replace all 8 AA batteries with new ones. Always use high-quality alkaline or lithium batteries for best performance, especially in cold weather.

6.2. SD కార్డ్ నిర్వహణ

Regularly check the SD card capacity. Format the SD card periodically (after backing up important files) to maintain optimal performance and prevent data corruption. A 16GB SD card can store a significant number of photos and videos, but frequent checks are recommended.

6.3. శుభ్రపరచడం

• Gently wipe the camera lens and IR sensor window with a soft, lint-free cloth to remove dirt or smudges.
• Clean the camera's exterior with a damp గుడ్డ. కఠినమైన రసాయనాలు లేదా రాపిడి పదార్థాలను ఉపయోగించవద్దు.
• Ensure the battery and SD card compartments are free of moisture and debris.

7. ట్రబుల్షూటింగ్

7.1. కెమెరా ఆన్ కావడం లేదు

• సరైన ధ్రువణతతో బ్యాటరీలు సరిగ్గా చొప్పించబడ్డాయని నిర్ధారించుకోండి.
• బ్యాటరీలు పూర్తిగా ఛార్జ్ అయ్యాయో లేదో తనిఖీ చేయండి లేదా వాటిని కొత్త వాటితో భర్తీ చేయండి.
• పవర్ స్విచ్ 'ఆన్' స్థానంలో ఉందో లేదో ధృవీకరించండి.

7.2. No Images/Videos Captured

• Check if the SD card is properly inserted and not full. Format the SD card if necessary (after backing up data).
• Ensure the camera is in an active mode (Photo, Video, or Photo+Video).
• Adjust PIR sensor sensitivity. Obstructions or extreme temperatures can affect detection.
• Verify the camera's placement and ensure the target area is within the detection range.

7.3. Poor Image/Video Quality

• Clean the camera lens and IR sensor window.
• Ensure the camera is stable and not subject to movement.
• బ్యాటరీ స్థాయిలను తనిఖీ చేయండి; తక్కువ పవర్ పనితీరును ప్రభావితం చేస్తుంది.
• For night images, ensure no reflective surfaces are too close to the camera, causing IR washout.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

Wildgame Innovations products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Wildgame Innovations website. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Wildgame Innovations customer service through their official channels.