ఉత్పత్తి ముగిసిందిview
This instruction manual provides detailed information on the installation, operation, and maintenance of your CENMING Universal Ceiling Fan Remote Control Kit. This kit is designed to enhance the functionality of your ceiling fan by providing convenient control over fan speed and light settings.
భద్రతా హెచ్చరికలు
హెచ్చరిక: అధిక వాల్యూమ్TAGE!
- Disconnect power by removing the fuse or switching off the circuit breaker before installation or maintenance.
- Do not use this kit with solid state fans.
- ఎలక్ట్రికల్ వైర్ తప్పనిసరిగా అన్ని స్థానిక మరియు జాతీయ విద్యుత్ కోడ్ అవసరాలను తీర్చాలి.
- ఫ్యాన్కు సరఫరా తప్పనిసరిగా 110/120 వోల్ట్, 60Hz ఉండాలి.
- గరిష్ట అభిమాని మోటార్ ampసె: 1.0.
- Maximum light watts: 240 incandescent or ballast. Otherwise, power can cause serious injury or death.
ఉత్పత్తి లక్షణాలు
- 3-స్పీడ్ ఫ్యాన్ కంట్రోల్: Independently control fan speed with HI, MED, LOW, and OFF settings.
- Light Dimmer Function: Control light brightness (ON/OFF and dimming) for compatible incandescent and dimmable LED lamps. Note: Some LED lights and all CFL lights are non-dimmable; the dimmer will only support ON/OFF for these, and may cause flickering with dimming.
- Powerful Receiver: FAN28R receiver with a rated power of 240W, allowing for more light bulbs and increased receiver lifespan.
- నీలి సూచిక: Provides visual feedback during operation.
- Learn Key: For pairing the remote with the receiver.
అనుకూలత
This universal kit is designed for wide compatibility with various ceiling fan brands and light bulb types.
- సీలింగ్ ఫ్యాన్లు: Works with most major 3-speed 110V AC ceiling fans, compatible with brands such as Harbor Breeze, Allen Roth, Kichler, Hunter, and Hampటన్ను బే.
- Fan Style: Compatible with most downrod style fans. Not recommended for use with hugger style fans, wall-mounted fans, or exhaust-type fans.
- లైట్ బల్బులు: Light dimmer is compatible with incandescent light bulbs and dimmable LED lamps. Non-dimmable LED lamps and all CFL lamps will only support ON/OFF function and may flicker if dimming is attempted.
ప్యాకేజీ విషయాలు
మీ ప్యాకేజీలో అన్ని వస్తువులు చేర్చబడ్డాయని ధృవీకరించండి:
- రిమోట్ కంట్రోల్ (1)
- Receiver (1) - Dimensions: 4.65 x 2.09 x 1.18 inches
- Wall Mount Holder (1)
- యూజర్ గైడ్ (1)
- వైర్ నట్స్ (6)
- మరలు (2)
సెటప్ మరియు ఇన్స్టాలేషన్
1. Setting the Codes (DIP Switches)
Both the remote control and the receiver have DIP switches. To ensure proper communication, the codes on the transmitter (remote) and the receiver must match. The factory setting is all up, but avoid using this position if possible to prevent interference with other devices.
2. సీలింగ్ ఫ్యాన్లో రిసీవర్ని ఇన్స్టాల్ చేస్తోంది
Before installation, ensure the size of your ceiling fan's canopy is sufficient to accommodate the receiver (4.65 x 2.09 x 1.18 inches). Follow the wiring diagram carefully.
- Turn off power to the ceiling fan at the circuit breaker.
- Remove the canopy of your ceiling fan.
- Connect the receiver wires to the fan and house wiring using the provided wire nuts, following the diagram below.
- Carefully tuck the receiver into the fan canopy.
- Reattach the fan canopy.
3. బ్యాటరీ ఇన్స్టాలేషన్ (రిమోట్ కంట్రోల్)
The remote control requires one 12V battery (not included). Open the battery compartment on the back of the remote and insert the battery, observing correct polarity. (Refer to Figure 5 for visual guidance).
రిమోట్ కంట్రోల్ని ఆపరేట్ చేస్తోంది
Once the receiver is installed and the remote has a battery, restore power to the ceiling fan. You can now operate your fan and light using the remote control.
| బటన్ | ఫంక్షన్ |
|---|---|
| HI | Sets fan speed to High. |
| MED | Sets fan speed to Medium. |
| తక్కువ | Sets fan speed to Low. |
| ఆఫ్ | ఫ్యాన్ ఆఫ్ చేస్తుంది. |
| Light Button (Sun/Bulb icon) | Turns the light ON/OFF. Press and hold to dim or brighten the light. |
Note: This remote does not have a reverse button. For fans with a reverse function, the switch is typically located on the fan motor housing. Turn off the fan and wait for the blades to stop before manually flipping the reverse switch.
నిర్వహణ
- శుభ్రపరచడం: Wipe the remote and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- బ్యాటరీ భర్తీ: Replace the 12V battery in the remote control when its range decreases or it stops responding. Dispose of old batteries responsibly.
- Receiver Longevity: The FAN28R receiver is designed for durability. Ensure proper ventilation within the fan canopy to prevent overheating.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Fan or light does not respond to remote. |
|
|
| Light flickers when dimming. | Non-dimmable LED or CFL bulbs. | Replace with dimmable incandescent or dimmable LED bulbs. Note that some LED bulbs may still flicker. All CFL bulbs are non-dimmable. |
| Limited remote range. | Weak remote battery or interference. | Replace the remote battery. Ensure no large metal objects are obstructing the signal path. |
స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| ఉత్పత్తి కొలతలు (రిసీవర్) | 4.65 x 2.09 x 1.18 అంగుళాలు |
| వస్తువు బరువు | 7 ఔన్సులు |
| మోడల్ సంఖ్య | FAN28R FAN-35T1 |
| బ్యాటరీలు అవసరం | 1 x 12V battery (for remote, not included) |
| అనుకూల పరికరాలు | 110V 3-Speed AC Ceiling Fan |
| Max Fan Motor Amps | 1.0A |
| Max Light Watts | 240W (Incandescent or Ballast) |
| రంగు | క్రీమ్ వైట్ |
| తయారీదారు | CENMING |
వారంటీ మరియు మద్దతు
CENMING is committed to product quality and customer satisfaction. While specific warranty details are not provided in this manual, for any issues, questions, or support needs, please contact the manufacturer directly through their official channels or the retailer where the product was purchased.
For additional information or assistance, you may refer to the official CENMING store on Amazon: CENMING Store.
