పరిచయం
This manual provides essential information for the safe and efficient operation of your Victron Energy Phoenix 1200VA 24-Volt 120V AC Pure Sine Wave Inverter. This inverter is designed to convert 24-Volt DC battery power into 120-Volt AC power, suitable for various domestic equipment in leisure, automotive, or off-grid applications.
వీడియో 1: ఒక ఓవర్view of the Victron Energy Phoenix Pure Sinewave Inverter, highlighting its suitability for off-grid RV or boat applications due to its small and compact design.
ముఖ్య లక్షణాలు ఉన్నాయి:
- సున్నితమైన ఎలక్ట్రానిక్స్ కోసం ప్యూర్ సైన్ వేవ్ అవుట్పుట్.
- 250VA continuous power and 400-Watt peak power.
- High efficiency with a low 0.8-Watt draw in ECO mode.
- VE.Direct communication port for monitoring and configuration via VictronConnect app.
- High start-up power capability for inductive loads.
- Compact design utilizing hybrid HF technology.
భద్రతా సమాచారం
WARNING: Electrical Shock Hazard. Read all safety instructions before installation or operation.
- స్థానిక విద్యుత్ కోడ్లకు అనుగుణంగా అర్హత కలిగిన సిబ్బంది ద్వారా ఇన్స్టాలేషన్ నిర్వహించాలి.
- Ensure the inverter is disconnected from all power sources before performing any maintenance or wiring.
- Do not expose the inverter to rain, snow, spray, or liquids.
- Operate the inverter in a well-ventilated area.
- ఇన్వర్టర్ తెరవవద్దు casing. లోపల వినియోగదారు-సేవ చేయదగిన భాగాలు లేవు.
- ఇన్వర్టర్ యొక్క సరైన గ్రౌండింగ్ నిర్ధారించుకోండి.
- Use appropriate battery cables and fuses as specified in the installation guide.
ఉత్పత్తి ముగిసిందిview
The Victron Energy Phoenix Inverter is a compact and robust device designed for reliable AC power conversion.
Physical Appearance and Dimensions
మూర్తి 2: ముందు view of the Victron Energy Phoenix 1200VA Pure Sine Wave Inverter. For more information, visit ve3.nl/plJz.
Figure 3: Dimensions of the Victron Energy Phoenix Inverter. The unit measures approximately 327 mm (12.9 inches) in length, 232 mm (9.1 inches) in width, and 117 mm (4.6 inches) in height. For more information, visit ve3.nl/plJz.
కనెక్షన్లు మరియు నియంత్రణలు
Figure 4: Rear panel of the inverter with DC input terminals, ON/OFF/ECO switch, VE.Direct port, remote connection, and ground terminal.
- DC ఇన్పుట్ టెర్మినల్స్: Marked NEG (-) and POS (+), these are for connecting the 24-Volt DC battery bank.
- ON/OFF/ECO Switch: Controls the inverter's operating mode.
- పై: Inverter is continuously active.
- ఆఫ్: Inverter is powered off.
- ECO: Energy-saving mode where the inverter switches to standby when the load decreases below a preset value. It periodically checks for load and reactivates when detected.
- పవర్ LED (ఆకుపచ్చ): Indicates the inverter is operating.
- Alarm LED (Red): Indicates a fault or warning condition.
- VE.Direct Port: A communication port for connecting to a computer (via VE.Direct to USB interface cable) or smartphones/tablets (via VE.Direct Bluetooth Smart dongle) for monitoring and configuration.
- Remote Connector: Allows connection of an external ON/OFF switch or vehicle ignition for remote control.
- గ్రౌండ్ టెర్మినల్: For proper grounding of the inverter.
- AC అవుట్పుట్: The 120V AC NEMA GFCI outlet for connecting AC loads.
మూర్తి 5: వైపు view of the inverter showing the NEMA GFCI AC output socket.
సెటప్
సంస్థాపన
- Mount the inverter in a dry, well-ventilated area, away from direct sunlight and heat sources.
- Ensure adequate clearance around the unit for proper airflow.
- Use appropriate mounting hardware to secure the inverter firmly.
వైరింగ్
- DC కనెక్షన్: Connect the battery cables to the NEG (-) and POS (+) terminals. Ensure correct polarity. Use appropriately sized cables and fuses for your system.
- గ్రౌండింగ్: Connect the ground terminal to a reliable earth ground.
- AC అవుట్పుట్: Plug your 120V AC appliances into the NEMA GFCI outlet.
- రిమోట్ కంట్రోల్ (ఐచ్ఛికం): If using a remote switch, connect it to the REMOTE terminals.
- VE.Direct Connection (Optional): For monitoring and configuration, connect a VE.Direct to USB interface cable to a computer or a VE.Direct Bluetooth Smart dongle for wireless connection to a smartphone/tablet.
Figure 6: Illustration of various output socket types and the VE.Direct port for connectivity, including options for remote control and different output sockets.
ఆపరేటింగ్ సూచనలు
Powering On/Off and ECO Mode
- To turn the inverter ON, set the switch to the 'ON' position. The green Power LED will illuminate.
- To turn the inverter OFF, set the switch to the 'OFF' position. All LEDs will turn off.
- To activate ECO mode, set the switch to the 'ECO' position. The inverter will enter a low-power standby state and periodically check for connected loads.
Figure 7: Visual representation of high start-up power, ECO mode functionality, and the remote on/off connector for easy system management.
VE.Direct Communication and VictronConnect App
The VE.Direct port allows for advanced monitoring and configuration of your inverter using the VictronConnect app on a smartphone, tablet, or computer.
Video 2: This video demonstrates how to reduce power consumption of an inverter in standby mode using the AES function in VE.Configure and VictronConnect. It explains the modified sine wave and search modes for energy saving.
Using VictronConnect, you can:
- Monitor real-time status, including input voltage, output power, and battery state.
- Configure settings such as output voltage, frequency, and low battery shutdown levels.
- Enable and adjust the Automatic Energy Saver (AES) function to optimize standby power consumption.
- Access diagnostic information and update firmware.
Figure 8: Screenshots of the VictronConnect app interface for monitoring and configuring inverter settings.
For detailed instructions on using VictronConnect, refer to the app's help section or the Victron Energy webసైట్.
నిర్వహణ
- శుభ్రపరచడం: Keep the inverter clean and free from dust and debris. Use a dry cloth for cleaning. Do not use liquid cleaners.
- వెంటిలేషన్: Regularly check that the ventilation openings are not blocked to ensure proper cooling.
- కనెక్షన్లు: Periodically inspect all electrical connections for tightness and corrosion. Tighten any loose connections and clean any corrosion.
- బ్యాటరీ ఆరోగ్యం: Monitor your battery bank's health and charge levels to ensure optimal inverter performance and battery longevity.
ట్రబుల్షూటింగ్
This section provides guidance on common issues. For more complex problems, contact Victron Energy support.
| లక్షణం | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| No AC output, Red Alarm LED on. | Overload, short circuit, over-temperature, low battery voltage. | Reduce load, check for short circuits, allow inverter to cool, charge batteries. |
| Inverter frequently switches to ECO mode or off. | తక్కువ బ్యాటరీ వాల్యూమ్tage, high standby consumption, or load below ECO threshold. | Charge batteries, adjust ECO mode settings via VictronConnect, ensure load is above threshold. |
| No communication via VE.Direct. | Incorrect cable, faulty dongle, software issue. | Check cable connections, ensure correct dongle is used, restart VictronConnect app. |
స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| మోడల్ సంఖ్య | పిన్ 242120510 |
| Continuous Power (25°C) | 1200VA |
| పీక్ పవర్ | 2200 వాట్స్ |
| DC ఇన్పుట్ వాల్యూమ్tage | 24-వోల్ట్ |
| AC అవుట్పుట్ వాల్యూమ్tage | 120V AC |
| అవుట్పుట్ వేవ్ఫార్మ్ | స్వచ్ఛమైన సైన్ వేవ్ |
| No-load Power (ECO mode) | 0.8-వాట్ |
| కొలతలు (L x W x H) | 12.9 x 9.1 x 4.6 అంగుళాలు (327 x 232 x 117 మిమీ) |
| వస్తువు బరువు | 18.33 పౌండ్లు |
| తయారీదారు | విక్ట్రాన్ ఎనర్జీ |
Note: Full specifications can be found on the official Victron Energy webసైట్.
వారంటీ మరియు మద్దతు
Victron Energy products are known for their quality and reliability. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Victron Energy webసైట్.
For technical support, product registration, or service inquiries, please contact Victron Energy customer service or an authorized dealer.
ఆన్లైన్ వనరులు:
- Victron Energy Official Webసైట్: www.victronenergy.com
- VictronConnect App: Available for download on major app stores.
