స్టెల్ప్రో అల్ట్రా-క్వైట్ వాల్ కన్వెక్టర్ హీటర్ (ASHC2002W) ఇన్‌స్ట్రక్షన్ మాన్యువల్

1. పరిచయం మరియు ఓవర్view

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. భద్రతా సమాచారం

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• ఈ హీటర్‌ను ఇన్‌స్టాల్ చేయడానికి లేదా ఉపయోగించే ముందు అన్ని సూచనలను చదవండి.
• Ensure the power supply is disconnected at the main circuit breaker before installation or maintenance.
• Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
• Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
• ఈ హీటర్ ఇండోర్ ఉపయోగం కోసం మాత్రమే రూపొందించబడింది.
• Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. ప్యాకేజీ విషయాలు

ప్యాకేజీని తెరిచినప్పుడు అన్ని భాగాలు ఉన్నాయని మరియు దెబ్బతినకుండా ఉన్నాయని ధృవీకరించండి:

• Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
• Concealed Mounting Bracket
• Back Entry Plate with Cable Clamps
• ఇన్‌స్టాలేషన్ హార్డ్‌వేర్ (స్క్రూలు, యాంకర్లు)
• ఇన్స్ట్రక్షన్ మాన్యువల్

4. స్పెసిఫికేషన్లు

చిత్రం 4.1: ఉత్పత్తి కొలతలు

5. సంస్థాపన

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Image 5.1: Hardwired Connection Requirement

5.1 హీటర్‌ను అమర్చడం

1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
3. Mark the drilling points on the wall using the concealed bracket as a template.
4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
5. అందించిన స్క్రూలను ఉపయోగించి మౌంటు బ్రాకెట్‌ను గోడకు భద్రపరచండి.
6. Ensure the bracket is level and securely fastened to support the heater's weight.

Image 5.2: Concealed Mounting Bracket

5.2 ఎలక్ట్రికల్ వైరింగ్

1. ప్రధాన సర్క్యూట్ బ్రేకర్ వద్ద విద్యుత్తు ఆపివేయబడిందని నిర్ధారించుకోండి.
2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
4. Secure all connections and ensure no bare wires are exposed.
5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
6. ప్రధాన సర్క్యూట్ బ్రేకర్ వద్ద విద్యుత్ సరఫరాను పునరుద్ధరించండి.

6. ఆపరేటింగ్ సూచనలు

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Image 6.1: Built-in Electronic Thermostat

6.1 ఉష్ణోగ్రత సెట్ చేయడం

• Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
• The heater will automatically maintain the set temperature.

6.2 ఆపరేటింగ్ మోడ్‌లు

• ఆటోమేటిక్ మోడ్: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
• భద్రతా మోడ్: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ హీటర్ యొక్క ఉత్తమ పనితీరును మరియు దీర్ఘాయువును నిర్ధారిస్తుంది.

• శుభ్రపరచడం: Ensure the heater is turned off and cool before cleaning. Use a soft, damp cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
• వార్షిక తనిఖీ: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. ట్రబుల్షూటింగ్

If your heater is not operating correctly, consult the following common issues before contacting support:

• హీటర్ ఆన్ చేయడం లేదు: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
• తగినంత వేడి లేదు: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
• అసాధారణ శబ్దాలు: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
• Thermostat Display Issues: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. వారంటీ మరియు మద్దతు

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

• 5-సంవత్సరం పరిమిత వారంటీ on the overall unit.
• జీవితకాల వారంటీ హీటింగ్ ఎలిమెంట్ మీద.
• 3 సంవత్సరాల వారంటీ on electronic components.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro webసైట్.