REDTIGER Dash Cam Hardwire Kit Instruction Manual

పరిచయం

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your REDTIGER Dash Cam Multi-Size Hardwire Kit. This kit is designed to provide a continuous power supply to your dash camera, enabling 24-hour parking monitoring with integrated low voltage protection and a convenient voltage indicator. Please read this manual thoroughly before installation to ensure proper setup and optimal performance.

ప్యాకేజీ విషయాలు

క్రింద జాబితా చేయబడిన అన్ని వస్తువులు మీ ప్యాకేజీలో చేర్చబడ్డాయని ధృవీకరించండి:

• REDTIGER Dash Cam Hardwire Kit (with USB-C power port and voltagఇ సూచిక)
• Multiple Fuse Adapters (various sizes)
• Installation Tool (crowbar)

Image: Complete REDTIGER Hardwire Kit showing all included components.

కీ ఫీచర్లు

• యూనివర్సల్ అనుకూలత: 12V to 24V input, delivering a consistent 5V/3A MAX to REDTIGER dash cams via Type-C ports. Includes four types of fuse adapters in two sets for broad vehicle compatibility.
• సులభమైన సంస్థాపన: Designed for hidden wiring, eliminating the need for a car cigarette lighter socket. Includes an installation tool for a clean setup.
• నిరంతర పర్యవేక్షణ: Taps directly into the car battery or fuse box, providing constant power for 24-hour parking monitoring, even when the vehicle is switched off.
• తక్కువ వాల్యూమ్tagఇ రక్షణ: Automatically cuts off power after 60 seconds if the voltage drops below 11.8V (+/-0.2V) to prevent car battery drain. Not suitable for trucks with voltagఇ 24V పైన.
• Multiple Security Protection: Includes safeguards against over-current, short-circuit, reverse connection, and overheating.
• వాల్యూమ్tage Readout Feature: Built-in display allows real-time monitoring of the vehicle's voltage.

సెటప్ & ఇన్‌స్టాలేషన్

This section provides detailed steps for installing your REDTIGER Hardwire Kit. It is strongly recommended to refer to your vehicle's manual or seek professional assistance if you are unsure about any steps.

ఇన్‌స్టాలేషన్ వీడియో గైడ్

దశల వారీ సంస్థాపన

1. తయారీ:

   Ensure everything is ready and safe before beginning the installation. Turn off your vehicle's ignition and disconnect the negative terminal of your car battery for safety.

2. Locate the Fuse Box:

   The car's fuse box is typically located under the dashboard on the driver's side or in the engine compartment. In some vehicles, like certain BMW models, it might be found in the trunk.

   

   చిత్రం: ఉదాample of a car's fuse box, often found in the trunk or under the dashboard.

3. Identify ACC and Constant Power Fuse Slots:

   Identify the ACC (Accessory) fuse slot in the fuse box. This slot provides power only when the ignition is on. Locate the constant power fuse slot, which provides power even when the ignition is off (for parking monitoring).

   Refer to your vehicle's fuse box diagram (usually on the fuse box cover or in the owner's manual) to identify these specific terminals. The terminal that still has current after the car is turned off is the B+ (constant power), while the terminal that loses power after the car is turned off is the ACC. (Note: Some car models have a delayed power-off feature for the ACC terminal, so it is necessary to wait until the power is completely cut off before conducting the test.)

   

   Image: Different types of fuse adapters provided to match various vehicle fuse box configurations.

4. వైర్లను కనెక్ట్ చేయండి:

   • కనెక్ట్ చేయండి ఎరుపు తీగ from the hardwire kit to the ACC fuse slot using an appropriate fuse tap.
   • కనెక్ట్ చేయండి పసుపు తీగ from the hardwire kit to the constant power (B+) fuse slot using an appropriate fuse tap.
   • Find a suitable grounding point near the fuse box (a metal surface securely connected to the vehicle's chassis). Connect the నల్ల వైర్ from the hardwire kit to this grounding point using the ring terminal or suitable connector.
   

   Image: Proper connection of the hardwire kit's red, yellow, and black wires to the fuse box and ground.

5. కేబుల్‌ను రూట్ చేయండి:

   Use the provided installation tool (crowbar) to hide the remaining wire along the gap of the front windshield, down the A-pillar, and along the gap between the car body and the ceiling on the side of the passenger seat, and between the rear seat and the ceiling, leading to the dash cam's mounting location.

   

   Image: Demonstrating how to tuck the cable neatly along the windshield and A-pillar using the installation tool.

   

   Image: Illustrating the cable routing path towards the rear of the vehicle for a clean installation.

6. తుది తనిఖీ:

   Once all connections are secure and wires are neatly routed, reconnect the negative terminal of your car battery. Test the hardwire kit by turning on the ignition. The dash cam should receive power and begin functioning.

ముఖ్యమైన గమనిక:

The REDTIGER Hardwire Kit is compatible with all REDTIGER series dash cams (e.g., F7N/F7NP/F7NT/F7NS/F8/F9/F17/F4/F77 Mini Dash Cam and T27/T700 Mirror Dash Cams etc.). It is not suitable for dash cams from other brands.

Image: Visual representation of the hardwire kit and compatible REDTIGER dash cam models.

ఆపరేటింగ్ సూచనలు

24H పార్కింగ్ పర్యవేక్షణ

Once correctly installed, the hardwire kit enables your compatible REDTIGER dash cam to continuously monitor your vehicle for 24 hours. This feature is active even when your car's ignition is off, providing surveillance against potential incidents.

Image: Illustrates the 24-hour parking monitoring capability, providing continuous protection for your vehicle.

వాల్యూమ్tagఇ రీడౌట్

The hardwire kit features a built-in voltage indicator. This display provides real-time information on your vehicle's battery voltage, allowing you to monitor its status directly from the hardwire unit.

నిర్వహణ

The REDTIGER Hardwire Kit is designed for durability and requires minimal maintenance. To ensure longevity and optimal performance:

• అన్ని కనెక్షన్‌లు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోవడానికి కాలానుగుణంగా తనిఖీ చేయండి.
• Keep the hardwire unit and cables free from excessive dust or moisture.
• Avoid exposing the unit to extreme temperatures outside of normal vehicle operating conditions.

ట్రబుల్షూటింగ్

If you encounter issues with your hardwire kit, consider the following common solutions:

• డాష్ క్యామ్ ఆన్ కావడం లేదు:
  • Ensure all three wires (red, yellow, black) are correctly connected to their respective terminals (ACC, B+, Ground).
  • Verify that the fuse taps are properly inserted into the fuse box and that the original fuses are correctly placed within the taps.
  • Check your vehicle's fuses to ensure none are blown.
• Parking Monitoring Not Working:
  • Confirm the yellow wire (B+) is connected to a constant power source that remains active when the ignition is off.
  • Ensure your dash cam's parking mode feature is enabled and configured correctly according to its own manual.
• తక్కువ వాల్యూమ్tage Cut-off Issues:
  • The kit is designed to protect your car battery. If the voltage drops below 11.8V, it will cut off power. This is normal operation.
  • If the cut-off occurs too frequently, consider checking your car battery's health or reducing the parking monitoring duration if your dash cam allows.
• వాల్యూమ్tage Indicator Not Displaying:
  • Ensure the hardwire kit is receiving power.
  • Check for any damage to the voltage indicator unit itself.

If problems persist, please contact REDTIGER customer support for further assistance.

స్పెసిఫికేషన్లు

వారంటీ & మద్దతు

REDTIGER is committed to providing high-quality products and excellent customer service. Your hardwire kit comes with the following:

• 18 Months Protection: Enjoy extended coverage for your product.
• 7 రోజుల రిటర్న్ పాలసీ: For returns based on change of mind or non-defective reasons.
• లోపాలపై రాబడి: Hassle-free returns for any manufacturing defects.

For any professional help or inquiries, please feel free to reach out to REDTIGER customer support. We offer 24-hour support via email and phone.

మీరు అధికారిని కూడా చూడవచ్చు వినియోగదారు మాన్యువల్ (PDF) అదనపు సమాచారం కోసం.