PureFlow AirDog II-5G DF-220-5G Fuel Pump Instruction Manual

1. పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of the AirDog II-5G DF-220-5G Fuel System, specifically designed for 1994-1998 Dodge Ram P-Pump 12V Cummins engines. This system is a 220 GPH (Gallons Per Hour) lift pump, intended for heavily modified trucks. Please read this manual thoroughly before beginning installation or operation to ensure proper function and longevity of your fuel system.

2. చేర్చబడిన భాగాలు

The AirDog II-5G DF-220-5G Fuel System kit typically includes the following main components:

• AirDog II-5G DF-220-5G Lift Pump Unit
• Fuel Air Separator (integrated)
• Sandwich Plate Mounting System
• Draw Straw for Fuel Tank
• Fuel Lines and Fittings
• వైరింగ్ హార్నెస్
• Filler Neck Return Tee
• ఇన్‌స్టాలేషన్ హార్డ్‌వేర్

3. సెటప్ మరియు ఇన్‌స్టాలేషన్

Proper installation is crucial for the performance and longevity of your AirDog fuel system. It is recommended that installation be performed by a qualified technician.

3.1 పంపును మౌంట్ చేయడం

1. Locate a suitable position on the vehicle's frame rail for mounting the AirDog pump unit.
2. Utilize the supplied sandwich plate mounting system to securely attach the pump to the frame rail. Ensure adequate clearance from moving parts and heat sources.

3.2 Fuel Tank Modifications

1. Install the provided draw straw into the fuel tank. This component is responsible for supplying fuel to the AirDog pump. Follow specific instructions for your vehicle's fuel tank removal and modification.

3.3 Fuel Line Connections

1. Connect the pressure side of the AirDog pump directly into the side of the P-Pump. This bypasses the factory fuel filter housing and the block-mounted pump.
2. Route the injection pump return line to tie into the engine return. This step eliminates the need for the factory filter head.
3. Connect the AirDog Air/Vapor return line back to the fuel tank through the filler neck return tee.
4. Ensure all fuel line connections are secure and free of leaks. Use appropriate thread sealant where necessary.

3.4 విద్యుత్ కనెక్షన్లు

Connect the supplied wiring harness to the AirDog pump and the vehicle's electrical system according to the detailed wiring diagram provided in the full installation guide (not included in this summary). Ensure proper grounding and fuse protection.

4. ఆపరేటింగ్ సూచనలు

4.1 ప్రారంభ ప్రారంభం మరియు ప్రైమింగ్

1. After installation, turn the ignition key to the "ON" position (without starting the engine) for 15-30 seconds to allow the AirDog pump to prime the fuel system. Repeat this step 2-3 times.
2. Start the engine. Monitor for any unusual noises or fuel leaks.
3. Allow the engine to idle for several minutes to ensure proper fuel flow and pressure.

4.2 సాధారణ ఆపరేషన్

The AirDog II-5G system operates automatically once the engine is running, maintaining optimal fuel pressure and filtering fuel. No user intervention is typically required during normal driving conditions.

4.3 సిస్టమ్ మానిటరింగ్

It is recommended to periodically check fuel pressure, especially if you have an aftermarket fuel pressure gauge. Consistent fuel pressure is vital for engine performance and longevity.

5. నిర్వహణ

Regular maintenance ensures the continued efficiency and reliability of your AirDog fuel system.

5.1 Fuel Filter Replacement

• The AirDog II-5G system utilizes two filters: a fuel filter and a water separator.
• Replace both filters at recommended intervals, typically every 15,000 to 20,000 miles, or as indicated by a drop in fuel pressure or engine performance.
• Always use genuine AirDog replacement filters to ensure proper filtration and fitment.
• To replace, unscrew the old filters, apply a thin film of diesel fuel or clean oil to the new filter gaskets, and screw them on until hand-tight, then an additional 1/4 to 1/2 turn.

5.2 Water Separator Draining

Periodically drain any accumulated water from the water separator. This is typically done by opening a drain valve at the bottom of the separator until only fuel flows out. Refer to the full installation manual for specific instructions on your model.

5.3 System Inspection

Regularly inspect all fuel lines, fittings, and electrical connections for signs of wear, damage, or leaks. Address any issues promptly to prevent system failure.

6. ట్రబుల్షూటింగ్

For further troubleshooting or issues not listed here, please refer to the comprehensive AirDog installation manual or contact Airdog technical support.

7. స్పెసిఫికేషన్లు

బ్రాండ్:

ఎయిర్ డాగ్

మోడల్ సంఖ్య:

A7SABD527

ఉత్పత్తి కొలతలు (L x W x H):

13 x 19 x 7 అంగుళాలు

వస్తువు బరువు:

29.5 పౌండ్లు

ఫిట్ రకం:

Vehicle Specific Fit (1994-1998 Dodge Ram P-Pump 12V Cummins)

వాహన సేవ రకం:

ట్రక్

గ్యాస్ రకం:

డీజిల్

ఆపరేషన్ మోడ్:

Mechanical (Lift Pump)

ఫ్లో రేట్:

220 GPH (గంటకు గ్యాలన్లు)

UPC:

813094011278

ASIN:

B09WGRRQXM

8. వారంటీ మరియు మద్దతు

For specific warranty information regarding your AirDog II-5G DF-220-5G Fuel Pump, please refer to the warranty card included with your product or visit the official Airdog webసైట్. వారంటీ నిబంధనలు సాధారణంగా నిర్దిష్ట కాలానికి తయారీ లోపాలను కవర్ చేస్తాయి.

For technical support, installation assistance, or to inquire about replacement parts, please contact Airdog customer service directly. Contact information can usually be found on their official webసైట్ లేదా ఉత్పత్తి ప్యాకేజింగ్‌లో.

Note: Unauthorized modifications or improper installation may void your product warranty.