Absima CR4S V2 2.4Ghz Radio System

1. పరిచయం

ధన్యవాదాలు, ధన్యవాదాలు.asing the Absima CR4S V2 2.4Ghz Radio System. This 4-channel pistol grip remote control system is designed for reliable and precise operation of your remote-controlled vehicles. It features a robust design and includes a "beginner mode" for ease of use, making it suitable for users of all experience levels.

2. భద్రతా జాగ్రత్తలు

• Always operate your RC vehicle in a safe and responsible manner.
• Ensure batteries are correctly installed and charged before use.
• Do not expose the radio system to water or extreme temperatures.
• Keep the system away from small children to prevent accidental ingestion of small parts.
• Turn off the receiver first, then the transmitter, when finished operating. Turn on the transmitter first, then the receiver, when starting operation.

3. ప్యాకేజీ విషయాలు

The Absima CR4S V2 2.4Ghz Radio System package includes the following components:

• Absima CR4S V2 2.4Ghz Transmitter (TX)
• Absima 2.4Ghz Receiver (RX)

4. ఉత్పత్తి ముగిసిందిview

Familiarize yourself with the main components of your Absima CR4S V2 radio system.

Figure 4.1: Absima CR4S V2 Transmitter (left) and Receiver (right).

మూర్తి 4.2: వివరంగా view of the Absima CR4S V2 Transmitter's control panel, showing various adjustment knobs and switches.

4.1 ట్రాన్స్మిటర్ (టిఎక్స్)

• స్టీరింగ్ వీల్: Controls the left and right steering of the vehicle.
• థొరెటల్ ట్రిగ్గర్: Controls forward and reverse movement. Pull for forward, push for reverse/brake.
• CH3/CH4 Buttons/Switches: Auxiliary channels for controlling additional functions on your vehicle (e.g., lights, winches), if supported.
• ట్రిమ్ సర్దుబాట్లు: Dials or sliders for fine-tuning steering and throttle neutral positions.
• పవర్ స్విచ్: ట్రాన్స్‌మిటర్‌ను ఆన్/ఆఫ్ చేస్తుంది.
• బ్యాటరీ కంపార్ట్మెంట్: Located at the bottom of the handle, for installing alkaline batteries.

4.2 స్వీకర్త (RX)

• యాంటెన్నా: Receives signals from the transmitter. Ensure it is properly positioned.
• Channel Ports: Connectors for steering servo, throttle ESC, and auxiliary channels (CH3, CH4).
• బైండ్ బటన్: Used to pair the receiver with the transmitter.

5. సెటప్

5.1 ట్రాన్స్‌మిటర్ బ్యాటరీ ఇన్‌స్టాలేషన్

1. Locate the battery compartment cover on the bottom of the transmitter handle.
2. కవర్‌ని స్లైడ్ చేయండి.
3. Insert the required alkaline batteries (not included) according to the polarity markings (+/-).
4. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను సురక్షితంగా మూసివేయండి.

5.2 Receiver Installation and Connection

1. Mount the receiver securely in your RC vehicle, away from electrical interference.
2. Connect the steering servo to the "CH1" port on the receiver.
3. Connect the Electronic Speed Controller (ESC) to the "CH2" port on the receiver.
4. Connect any auxiliary components (e.g., lights) to "CH3" or "CH4" ports as needed.
5. Ensure the receiver antenna is extended and positioned correctly for optimal signal reception.

5.3 ట్రాన్స్మిటర్ మరియు రిసీవర్ బైండింగ్

Binding is the process of linking the transmitter and receiver so they communicate exclusively with each other.

1. ట్రాన్స్‌మిటర్ ఆఫ్ చేయబడిందని నిర్ధారించుకోండి.
2. Connect a bind plug (if supplied with your vehicle's ESC or receiver) to the "BIND" port on the receiver.
3. Power on the RC vehicle (which powers the receiver). The receiver's LED should flash, indicating it's in bind mode.
4. While holding down the bind button on the transmitter (refer to transmitter diagram for location), turn on the transmitter.
5. Release the bind button on the transmitter once its LED indicates a successful connection (usually a solid light).
6. Turn off the receiver, then the transmitter.
7. రిసీవర్ నుండి బైండ్ ప్లగ్‌ను తీసివేయండి.
8. Turn on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful bind.

6. ఆపరేటింగ్

6.1 Power On/Off Sequence

• పవర్ ఆన్ చేయడానికి: Turn on the transmitter first, then power on your RC vehicle (receiver).
• పవర్ ఆఫ్ చేయడానికి: Power off your RC vehicle (receiver) first, then turn off the transmitter.

6.2 ప్రాథమిక నియంత్రణలు

• స్టీరింగ్: Rotate the steering wheel left or right to control the direction of your vehicle.
• థొరెటల్: Pull the trigger towards you for forward movement. Push the trigger away from you for reverse or braking.
• Auxiliary Channels (CH3/CH4): Use the corresponding buttons or switches on the transmitter to activate functions connected to these channels on your vehicle.

6.3 బిగినర్స్ మోడ్

The Absima CR4S V2 features a "beginner mode" which limits the maximum throttle output, making the vehicle easier to control for new users or children. Refer to your transmitter's specific controls for activating and deactivating this mode. This mode helps in learning to drive without overwhelming power.

7. నిర్వహణ

• Keep the transmitter and receiver clean and free from dust and dirt. Use a soft, dry cloth for cleaning.
• Avoid exposing the system to direct sunlight or high humidity for extended periods.
• ట్రాన్స్‌మిటర్ ఎక్కువ కాలం ఉపయోగించకపోతే, లీకేజీని నివారించడానికి బ్యాటరీలను తీసివేయండి.
• Regularly check all connections for security and wear.

8. ట్రబుల్షూటింగ్

9. స్పెసిఫికేషన్లు

• మోడల్ సంఖ్య: 2000010
• ఛానెల్‌లు: 4
• ఫ్రీక్వెన్సీ: 2.4 GHz
• ట్రాన్స్మిటర్ కొలతలు: సుమారు 9 x 2 x 36 సెం.మీ
• బరువు: Approximately 130 g (Transmitter only, without batteries)
• మెటీరియల్: ప్లాస్టిక్
• రంగు: నలుపు
• Batteries Required (Transmitter): Yes (Alkaline, not included)
• అసెంబ్లీ అవసరం: నం

10. వారంటీ

Absima products are manufactured to high quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your purchase or visit the official Absima webసైట్.

11. మద్దతు

For technical assistance, troubleshooting, or spare parts inquiries, please contact your local Absima dealer or visit the official Absima support website. Online resources, FAQs, and contact information can typically be found there.