WOLFBOX USB C Hardwire Kit Instruction Manual

పరిచయం

This manual provides detailed instructions for installing, operating, and maintaining your WOLFBOX USB C Hardwire Kit. This kit is designed to provide continuous power to your compatible WOLFBOX dash cam, enabling features like 24/7 parking surveillance and low voltage protection. Please read this manual thoroughly before installation to ensure proper and safe usage.

ఏమి చేర్చబడింది

Your WOLFBOX USB C Hardwire Kit package includes the following components:

• WOLFBOX USB C Hardwire Kit (main unit with USB-C connector, red ACC wire, yellow B+ wire, black ground wire)
• Multiple sizes of fuse taps (Micro, Mini, Small, Medium) for broad vehicle compatibility
• Trim removal tool for safe panel removal

Image: Complete contents of the WOLFBOX USB C Hardwire Kit package.

సెటప్ & ఇన్‌స్టాలేషన్

Proper installation is crucial for the optimal performance of your hardwire kit. Follow these steps carefully:

ప్రీ-ఇన్‌స్టాలేషన్ చెక్‌లిస్ట్

• Ensure your vehicle's engine is completely off.
• Disconnect the negative terminal of your car battery to prevent short circuits during installation.
• Confirm your dash cam uses a USB-C port for power.

Identifying Fuse Box and Ground Point

Locate your vehicle's interior fuse box, typically found near the driver's side dashboard or footwell. You may need to remove a panel to access it. Use the provided trim removal tool for this purpose.

చిత్రం: ఉదాample of fuse box location and suggested cable routing in a car interior.

Identify a suitable ground point, usually a metal bolt or screw on the vehicle's chassis near the fuse box. This is where the black ground wire from the hardwire kit will be connected.

వైరింగ్ కనెక్షన్లు

The hardwire kit includes three wires: red (ACC), yellow (B+), and black (Ground). You will use the appropriate fuse taps to connect the red and yellow wires to your fuse box.

• Yellow Wire (B+ / Battery Positive): Connect this to a fuse that provides constant power, even when the vehicle is off. This is essential for parking surveillance.
• Red Wire (ACC / Accessory Power): Connect this to a fuse that only receives power when the vehicle's ignition is on (e.g., cigarette lighter fuse). This signals the dash cam to switch between driving and parking modes.
• బ్లాక్ వైర్ (నేల): Securely attach this to the identified metal ground point on the vehicle's chassis.

Image: Detailed wiring diagram for the hardwire kit connections.

Image: Various fuse tap types included for compatibility with different vehicle fuse boxes.

Cable Routing and Testing

Carefully route the hardwire kit cable from the fuse box up to your dash cam, tucking it neatly along the vehicle's interior trim using the trim removal tool. Once all connections are made, reconnect your car battery's negative terminal and test the dash cam's functionality.

ఆపరేటింగ్ సూచనలు

The hardwire kit enables advanced recording features for your WOLFBOX dash cam:

24/7 Parking Surveillance

When connected to a constant power source (B+ wire), the hardwire kit allows your dash cam to monitor your vehicle even when the engine is off. This protects against theft and records incidents in the parking lot.

Image: Visual representation of 24-hour parking monitoring provided by the hardwire kit.

తక్కువ వాల్యూమ్tagఇ రక్షణ

The kit features a smart low voltage protection system. It will automatically shut off power to your dash cam if the car battery voltage drops to 11.6V (for 12V systems) or 22.8V (for 24V systems). This prevents draining your vehicle's battery, ensuring you can always start your car.

నిరంతర రికార్డింగ్

While driving, the dash cam will operate in normal continuous recording mode, powered by the ACC connection.

నిర్వహణ

• అన్ని వైరింగ్ కనెక్షన్లు సురక్షితంగా మరియు తుప్పు పట్టకుండా ఉండేలా కాలానుగుణంగా తనిఖీ చేయండి.
• Ensure cables are not pinched or exposed to excessive heat or sharp edges.
• Keep the fuse box area clean and dry.

ట్రబుల్షూటింగ్

• డాష్ క్యామ్ ఆన్ కావడం లేదు:
  • Check all fuse connections (ACC, B+) to ensure they are properly seated and receiving power.
  • Verify the ground wire is securely connected to a metal chassis point.
  • Ensure the USB-C connector is fully inserted into the dash cam.
  • Confirm the correct fuse type and rating are used for the fuse taps.
• పార్కింగ్ మానిటర్ పనిచేయడం లేదు:
  • Ensure the yellow B+ wire is connected to a constant power fuse.
  • Check your dash cam settings to ensure parking mode is enabled.
• బ్యాటరీ డ్రెయిన్:
  • The hardwire kit has built-in low voltage protection. If your battery is still draining, check for other vehicle electrical issues or consult a professional.
  • Ensure the dash cam's parking mode settings (e.g., sensitivity, duration) are not excessively high.

స్పెసిఫికేషన్లు

వారంటీ & మద్దతు

WOLFBOX is committed to providing high-quality products and excellent customer service. Your hardwire kit comes with the following:

• 12 నెలల వారంటీ: సాధారణ ఉపయోగంలో తయారీ లోపాలు మరియు లోపాలను కవర్ చేస్తుంది.
• 7 రోజుల రిటర్న్ పాలసీ: For returns within 7 days of purchase.
• లోపాలపై రాబడి: Products with confirmed defects are eligible for return.

For any inquiries or support, please contact WOLFBOX customer service:

• ఇమెయిల్: service@wolfbox.com
• ఫోన్: +1 888 296 8399