PETKIT వైర్‌లెస్ పంప్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

1. ఉత్పత్తి ముగిసిందిview

The PETKIT Wireless Pump is a replacement component designed for specific PETKIT wireless pump water fountains. This pump ensures continuous water circulation, providing fresh, filtered water for your pets. Its wireless design enhances safety and simplifies maintenance.

A gray rectangular wireless pump with a foam filter on top, designed for PETKIT water fountains.

2. అనుకూలత

This wireless pump is compatible with the following PETKIT wireless pump water fountain models:

• PETKIT EVERSWEET MAX
• PETKIT EVERSWEET 3 PRO
• పెట్‌కిట్ ఎవర్‌స్వీట్ సోలో 2
• PETKIT EVERSWEET SOLO SE

Important Note: This pump is NOT suitable for the original PETKIT EVERSWEET 3 model.

కొనుగోలు చేయడానికి ముందుasing or installing, please confirm the model of your existing water fountain to ensure compatibility.

An image displaying four different PETKIT wireless water fountain models (EVERSWEET SOLO SE, EVERSWEET MAX, EVERSWEET SOLO 2, EVERSWEET 3 PRO) that are compatible with this replacement pump.

3. భద్రతా లక్షణాలు

The PETKIT Wireless Pump is designed with safety as a priority. It features a wireless operation, meaning there are no exposed electrical lines within the water. This design significantly reduces the risk of electric leakage, providing a safer environment for your pets.

An X-ray like view of the PETKIT wireless pump, highlighting its internal components and the absence of exposed wires for enhanced safety.

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Installing the PETKIT Wireless Pump is a straightforward process. Ensure your water fountain is unplugged and empty before beginning.

1. Remove the top cover and water tray from your PETKIT water fountain.
2. Locate the pump compartment at the bottom of the water reservoir.
3. Carefully remove the old pump, if present.
4. Place the new PETKIT Wireless Pump into the designated compartment. Ensure it is seated correctly.
5. Reinstall the water tray and top cover.
6. Fill the fountain with water to the recommended level and plug it in. The pump should begin operating automatically.

5. ఆపరేటింగ్ సూచనలు

Once properly installed and the fountain is filled with water and plugged in, the PETKIT Wireless Pump operates continuously to circulate water. The pump is designed for quiet operation, minimizing disturbance to your pets and household.

Ensure the water level in the fountain is always above the minimum fill line to prevent the pump from running dry, which can cause damage.

6. నిర్వహణ

Regular cleaning of the pump is essential to maintain optimal water flow and extend the lifespan of your fountain. It is recommended to disassemble and clean the pump at least once every two weeks.

A visual guide showing four steps to clean the PETKIT wireless pump.

శుభ్రపరిచే దశలు:

1. వేరుచేయడం: Remove the foam filter, the front cover, and then the impeller cover.
2. Impeller Removal: Use tweezers or a small tool to carefully clamp out and remove the impeller.
3. Rinsing and Brushing: Rinse the foam filter thoroughly under running water. Use a small brush (e.g., a bottle brush or a dedicated cleaning brush) to clean all other components, including the pump housing and impeller, to remove any debris or mineral buildup.
4. తిరిగి కలపడం: Reinstall all components in reverse order: impeller, impeller cover, front cover, and finally the foam filter. Ensure all parts are securely in place.

The pump includes a replaceable foam filter designed to adsorb hairs and protect the pump from damage. Regularly inspect and clean this filter.

A hand demonstrating the insertion of the replaceable foam filter into the PETKIT wireless pump, which helps to adsorb hairs and protect the pump.

7. ట్రబుల్షూటింగ్

If you experience issues with your PETKIT Wireless Pump, consider the following common solutions:

• Reduced Water Flow or Sputtering: This is often caused by debris or mineral buildup in the pump. Perform a thorough cleaning as described in the Maintenance section. Ensure the foam filter is clean and not clogged.
• పంపు పనిచేయడం లేదు:
  • Check if the fountain is properly plugged into a working power outlet.
  • Ensure there is sufficient water in the fountain. The pump requires water to operate.
  • Verify that the pump is correctly seated in its compartment within the fountain.
  • Disassemble and inspect the impeller for any obstructions or damage.
• అసాధారణ శబ్దం: Noise can indicate debris caught in the impeller or a need for cleaning. Follow the maintenance steps to clean the pump thoroughly.

If the issue persists after troubleshooting, please contact PETKIT customer support for further assistance.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

For warranty information and customer support, please contact PETKIT directly. Ensure you have your product model number (W4X) and purchase details available when contacting support.

సంప్రదింపు సమాచారం:

• US స్థానిక అమ్మకాల తర్వాత టెలిఫోన్: (888) 851-2770
  (Operating Hours: 9:00 am - 12:00 pm & 1:00 pm - 6:00 pm CST, Monday - Friday)
• International Email Service: support@petkit.com
  (24/7 అందుబాటులో ఉంటుంది)