1. పరిచయం
This instruction manual provides detailed guidance for the installation and maintenance of the Geberit Replacement Kit for concealed cisterns. This kit contains essential functional components designed to address common issues such as leaks and continuous water flow in your toilet cistern, often caused by wear and limescale deposits.
The kit is compatible with specific Geberit concealed cistern models, ensuring a precise fit and reliable performance. By following these instructions, you can effectively restore the functionality of your cistern.
కిట్ కంటెంట్లు:
- Fill Valve (Float Valve)
- Lift Bell (Flush Valve)
- Pre-assembled Bell Seal
- Basket (Cradle)
- Pre-assembled Basket Seal
- మౌంటు బ్రాకెట్
చిత్రం 1.1: ముగిసిందిview of the Geberit Replacement Kit components, including the fill valve, flush valve, seals, and basket.
2. అనుకూలత
This replacement kit is specifically designed for Geberit concealed cisterns models UP300, UP320, and Sigma. To ensure compatibility, verify the following characteristics of your existing cistern:
- నిర్మాణ సంవత్సరం: From 2002 to present.
- Control Plate Dimensions: Approximately 24.5 x 16.5 cm.
- Cistern Identification Numbers: One of the following numbers should be present inside the cistern:
- 109.300.00.5 - 109.392.00.5
- 110.300.00.1 - 110.380.00.1
- 111.300.1 - 111.565.00.1
- 111.904.00.5 - 111.915.00.5
- 115.600.xx.x, 115.620.xx.x - 115.893.xx.x
- 260.270.00.1 - 260.386.00.5
- 440.300.00.1 - 440.355.00.1
- 461.303.00.1 - 461.316.00.1, 461.351.00.1, 461.370.00.5
- 813.00000.505.00.0
- 881.413.00.0 - 881.909.00.2, 882.097.00.0, 883.671.00.0, 883.834.00.0 to 888.085.00.0
- 927.285.00.0, 927.328.00.0
- 964.006.00.0, 964.145.00.0 (01), 964.172.00.0, 964.493.00.0, 964.496.00.0
- 966.098.00.0 (00), 996.098.00.0 (00), 996.358.00.0 (00), 996.358.00.0 (01), 996.358.00.0 (02)
- 96.433.0.0.0.0.0.0. (00), S00.578.00.5
ముఖ్యమైన: This kit is not suitable for other brands or models, nor for Geberit cisterns with top-mounted flush actuation.
Image 2.1: Visual guide for checking the compatibility of the flush valve bell. The replacement part is compatible if the eyelets of the existing bell match the top examples. It is not compatible if they resemble the bottom exampలెస్.
Image 2.2: Comparison showing various older Geberit flush valve models (left) and the new, compatible replacement model (right), which includes the basket and seal.
3. సెటప్ మరియు ఇన్స్టాలేషన్
Installation of this replacement kit is designed to be straightforward and can be performed through the cistern's revision opening. This means there is no need to remove tiles, simplifying the repair process.
3.1. Replacing the Flush Valve (Lift Bell)
- Turn off the water supply to the cistern.
- Remove the flush plate and access the cistern's interior.
- Drain any remaining water from the cistern.
- Carefully remove the old flush valve assembly. Note its orientation for reference.
- Install the new lift bell, ensuring the pre-assembled bell seal is correctly seated. The integrated fixing rail helps secure the valve in place.
- Attach the basket with its pre-assembled seal to the bottom of the cistern.
చిత్రం 3.1: వివరణాత్మకమైనది view of the new flush valve (Type 212) showing adjustment points for flush volume (small and large buttons), integrated fixing rail, pre-mounted seal, and flush flow adjustment for rimless WCs.
3.2. Replacing the Fill Valve (Float Valve)
- Disconnect the water supply hose from the old fill valve.
- Unscrew and remove the old fill valve from the cistern.
- Install the new fill valve (Type 383). It features a 3/8" brass connection for universal fitting.
- నీటి సరఫరా గొట్టాన్ని మళ్లీ కనెక్ట్ చేయండి.
చిత్రం 3.2: వివరణాత్మకమైనది view of the new fill valve (Type 383) highlighting the 3/8" brass adapter, water fill height adjustment, compact size, original Geberit branding, and quiet filling mechanism.
4. ఆపరేటింగ్ మరియు సర్దుబాట్లు
After installation, it is important to adjust the new components for optimal performance and water efficiency.
4.1. Flush Volume Adjustment (Flush Valve)
The flush valve allows for independent adjustment of the flush volume for both the small and large flush buttons. Refer to Image 3.1 for the location of these adjustment points on the flush valve. Typically, these are levers or sliders that can be moved to set the desired water volume for each flush type.
4.2. Water Fill Height Adjustment (Fill Valve)
The fill valve features an adjustment mechanism to control the water level inside the cistern. Refer to Image 3.2 for the location of the water fill height adjustment. This is usually a screw or a clip that allows you to raise or lower the float, thereby setting the maximum water level. Adjust this to prevent overfilling or underfilling.
4.3. Flush Flow Adjustment for Rimless WCs
For toilets with a rimless design, the flush valve includes an adjustable flush flow restrictor (drossel) to prevent splashing. This adjustment ensures a controlled and effective flush. Consult Image 3.1 for the specific location of this adjustment on the flush valve.
5. నిర్వహణ
Regular maintenance can extend the lifespan of your cistern components and prevent common issues.
- Limescale Prevention: In areas with hard water, limescale can accumulate on the fill valve and flush valve seals. Periodically inspect these components and clean them with a mild descaling solution if necessary.
- ముద్ర తనిఖీ: Check the bell seal and basket seal annually for signs of wear or damage. Replace them if they appear cracked, hardened, or are causing leaks.
- కాంపోనెంట్ క్లీనింగ్: Ensure that no debris or foreign objects are obstructing the movement of the fill valve float or the flush valve mechanism.
6. ట్రబుల్షూటింగ్
This section addresses common issues that the replacement kit is designed to resolve.
- Continuous Water Flow into the Toilet Bowl: This is typically caused by a faulty or worn flush valve seal. The replacement kit includes a new lift bell with a pre-assembled seal to resolve this. Ensure the new seal is properly seated and free of debris.
- Cistern Not Filling or Filling Slowly: This indicates an issue with the fill valve. The new fill valve in the kit should rectify this. Check for proper water supply connection and ensure the fill valve float is not obstructed.
- Leaks from the Cistern: If leaks persist after replacing the components, re-check all seals and connections for proper installation. Ensure the basket seal is correctly positioned.
- Incorrect Flush Volume: Adjust the flush volume settings on the flush valve as described in Section 4.1.
- Splashing during Flush (Rimless WC): Adjust the flush flow restrictor on the flush valve as described in Section 4.3.
Image 6.1: Summary of benefits: resolves issues with leaks and continuous water flow, easy installation via cistern revision opening (no tile removal), kit includes all frequently affected wear parts, new flush valve model with integrated and adjustable flush flow restrictor.
7. స్పెసిఫికేషన్లు
| గుణం | వివరాలు |
|---|---|
| తయారీదారు | గెబెరిట్ |
| ప్యాకేజీ కొలతలు | 34.29 x 23.1 x 7.5 సెం.మీ |
| వస్తువు బరువు | 440 గ్రాములు |
| శైలి | Without flexible hose |
| మెటీరియల్ | ప్లాస్టిక్ |
| బ్యాటరీలు అవసరం | నం |
| ASIN | B0B5M1CYCK |
8. వారంటీ సమాచారం
Warranty information for this specific product is not explicitly detailed in the provided product description. Please refer to Geberit's official website or contact their customer service for specific warranty terms and conditions.
9. కస్టమర్ మద్దతు
For further assistance, technical support, or inquiries regarding this Geberit replacement kit, please contact Geberit customer service directly. You can typically find contact information on the official Geberit webసైట్ లేదా మీ స్థానిక పంపిణీదారు ద్వారా.
When contacting support, please have your product model (UP300, UP320, Sigma) and any relevant purchase details available.
