GEARELEC Motorcycle Bluetooth Headset User Manual

1. ఉత్పత్తి ముగిసిందిview

The GEARELEC Motorcycle Bluetooth Headset is designed to provide clear communication and entertainment for riders. Featuring an upgraded Bluetooth 5.1 chip, it offers stable connections and a long intercom range of up to 1500 meters. The headset incorporates a triple noise reduction system and 40mm stereo speakers for crystal-clear sound quality, even at high speeds. Its user-friendly design ensures safe and efficient operation while riding.

2. ప్యాకేజీ విషయాలు

Before beginning installation, please verify that all items are present in the package:

• 2 x హెడ్‌సెట్‌లు
• 2 x Hard Mics
• 2 x Soft Mics
• 4 x Adhesive Tapes
• 2 x ఛార్జింగ్ కేబుల్స్
• 2 x మెటల్ క్లిప్‌లు
• 2 x స్క్రూడ్రైవర్లు
• 4 x మరలు
• 3m Foam Pad for Microphone x4
• 3m Foam Pad for Speaker x8
• Quick-release Clip x2

3. సెటప్ గైడ్

3.1. Headset Installation on Helmet

Follow these steps to properly install the headset on your helmet:

1. మౌంట్ Clamp: మౌంటు clను భద్రపరచండిamp to the helmet.
2. స్థానం: clని అమర్చండిamp to the proper position on the left side of the helmet.
3. Aligning Host: clను సమలేఖనం చేయండిamp slot and install the FX host onto the clamp.
4. Earphone Velcro Pads: Stick the earphone velcro pads at the ear position inside the helmet.
5. హెడ్‌ఫోన్‌లు: Stick the headphones on the Velcro pads.
6. ఇయర్ ఫోన్ జాక్: Plug the earphone into the FX earphone jacket.

3.2. Bluetooth Pairing with Mobile Phone

To connect your headset to your mobile phone:

1. జత చేసే విధానాన్ని నమోదు చేయండి: Long press the headset power button until the indicator flashes red and blue alternately. This indicates the headset is in pairing state.
2. కనెక్ట్ చేయండి: On your mobile phone, open Bluetooth settings and find "DK01" in the list of available devices. Click to connect.

3.3. Intercom Pairing Between Two Units

To establish intercom communication between two GEARELEC headsets:

1. జత చేసే విధానాన్ని నమోదు చేయండి: On both units, press and hold the power buttons until the indicators become red and blue alternate flashing lights.
2. జత చేయడం ప్రారంభించండి: Press the power button of either unit. Both units will begin to pair.
3. Pairing Complete: When the indicators of both units become slow flashing blue lights, it means the pairing is complete.

4. ఆపరేటింగ్ సూచనలు

4.1. ప్రాథమిక విధులు

• పవర్ ఆన్/ఆఫ్: పవర్ బటన్‌ను ఎక్కువసేపు నొక్కండి.
• మ్యూజిక్ ప్లే/పాజ్: పవర్ బటన్‌ను ఒకసారి నొక్కండి.
• తదుపరి పాట: '+' బటన్ నొక్కండి.
• మునుపటి పాట: '-' బటన్ నొక్కండి.
• ధ్వని పెంచు: '+' బటన్‌ను ఎక్కువసేపు నొక్కండి.
• వాల్యూమ్ డౌన్: '-' బటన్‌ను ఎక్కువసేపు నొక్కండి.
• కాల్‌లకు సమాధానం ఇవ్వండి/తిరస్కరించు: Use the dedicated phone button.

4.2. సూచిక కాంతి వివరణ

The headset features indicator lights to show its status:

• రెడ్ ఇండికేటర్ లైట్: When charging, the red light is on. It automatically turns off when the battery is fully charged.
• బ్లూ ఇండికేటర్ లైట్: The blue light flashes intermittently when the mobile phone is successfully connected.
• Red and Blue Flashing Alternately: This indicates the headset is waiting for a Bluetooth connection from the mobile phone. After a successful connection, the headset lights up blue.

5. సంరక్షణ మరియు నిర్వహణ

To ensure the longevity and optimal performance of your GEARELEC Bluetooth Headset, follow these care guidelines:

• నీటి నిరోధకత: The headset has an IP65 protection level, making it resistant to water splashes and dust. While it can withstand rain, avoid submerging it in water.
• ఉష్ణోగ్రత పరిధి: The headset is designed to operate in a wide temperature range from -40℃ to 60℃. Avoid exposing it to extreme temperatures outside this range for prolonged periods.
• శుభ్రపరచడం: ఒక మృదువైన ఉపయోగించండి, డిamp cloth to clean the exterior of the headset. Do not use harsh chemicals or abrasive cleaners.
• నిల్వ: When not in use for extended periods, store the headset in a cool, dry place away from direct sunlight.
• ఛార్జింగ్: Always use the provided Type-C charging cable. Ensure the charging port is dry before connecting the cable.

6. ట్రబుల్షూటింగ్

If you encounter issues with your GEARELEC Motorcycle Bluetooth Headset, consider the following general advice:

• శక్తి లేదు: Ensure the battery is charged. Connect the headset to the charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
• జత చేయడం సమస్యలు: If the headset does not pair with your phone or another unit, ensure both devices are in pairing mode and within range. Try restarting both the headset and the device you are trying to pair with. Clear previous Bluetooth connections on your phone if necessary.
• శబ్దం లేదు/ధ్వని నాణ్యత తక్కువగా ఉంది: Check the volume levels on both the headset and the connected device. Ensure the speakers are correctly positioned inside the helmet and that the microphone is not obstructed. Verify the headset is fully charged.
• ఇంటర్‌కామ్ డిస్‌కనెక్షన్: If the intercom frequently disconnects, ensure both units are within the specified 1500m range and there are no major obstructions. Re-pair the units if the issue persists.

For persistent issues or more detailed troubleshooting, please refer to the contact information in the Warranty & Support section.

7. స్పెసిఫికేషన్లు

8. వారంటీ మరియు మద్దతు

GEARELEC is committed to providing a satisfactory experience for its customers. While specific warranty terms are not detailed in this manual, the manufacturer stands behind its product.

If you have any questions, suggestions, or require technical assistance regarding the use or functionality of your GEARELEC Motorcycle Bluetooth Headset, please contact the manufacturer directly through their official channels or the retailer from whom you purchased the product. They will serve you wholeheartedly to resolve any concerns.